Difference between revisions of "Programming the P2 Scanners for DMR / MOTOTRBO"
From The RadioReference Wiki
Line 2: | Line 2: | ||
− | '''Required:''' The following firmware versions are required to copy DMR / MOTOTRBO | + | '''Required:''' The following firmware versions are required to copy DMR / MOTOTRBO. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3 |
* You can check your firmware version by selecting ''MENU --> Settings --> See Scanner Info'' | * You can check your firmware version by selecting ''MENU --> Settings --> See Scanner Info'' | ||
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/InstallingBC_VUP Install BC VUP3.03] | * [http://info.uniden.com/twiki/bin/view/UnidenMan4/InstallingBC_VUP Install BC VUP3.03] | ||
Line 9: | Line 9: | ||
* BCD325P2: 1.08.01 or later | * BCD325P2: 1.08.01 or later | ||
− | + | ==General and How Tos== | |
; Why won't my scanner receive DMR on Slot 1 and or Slot 2 | ; Why won't my scanner receive DMR on Slot 1 and or Slot 2 | ||
* Try reversing Slot numbers compared to System's Slot numbering. | * Try reversing Slot numbers compared to System's Slot numbering. | ||
Line 20: | Line 20: | ||
− | ; | + | ;Can You Program a frequency on the 325P2 or 996P2 to show DMR information? |
− | * Yes, | + | * Yes. When you program it, press '''Hold''' and set the mode to '''Digital'''` |
− | * | + | * Press Func + 6. There are 3 modes; Mode 1 shows NXDN or DMR, Mode 2 shows CC or RAN, Mode 3 shows slot or UID |
+ | |||
+ | |||
+ | ;Can the 325P2 and 996P2 search for a NAC (P25), Color Code (DMR), RAN or Area (NXDN)? | ||
+ | * Yes. Go to Srch/CloCall Opt, then Tone/Code Search, then NAC/CC/RAN/Area. | ||
+ | ==Capacity Max / Connect Plus Systems== | ||
;If the system is in the database as a Capacity Max or Connect Plus system, where can I find the color code, LCN and LSN? | ;If the system is in the database as a Capacity Max or Connect Plus system, where can I find the color code, LCN and LSN? | ||
[[Image:Site Freq Table CapMax.jpg|Site Frequency Table|right]] | [[Image:Site Freq Table CapMax.jpg|Site Frequency Table|right]] | ||
Line 32: | Line 37: | ||
− | ;How Can I find the correct LCN to use in Uniden scanners for a | + | ==Hytera Systems== |
+ | ;How Can I find the correct LCN to use in Uniden scanners for a Hytera System?''' | ||
[[Image:Site Frequency Table.jpg|Site Frequency Table|right]] | [[Image:Site Frequency Table.jpg|Site Frequency Table|right]] | ||
# If it's in the database, go to the frequency listing | # If it's in the database, go to the frequency listing | ||
Line 40: | Line 46: | ||
− | ; | + | ==Tier III (Trunking) Systems== |
− | * Yes | + | ;Is there a way to calculate the frequency from the LCN in a Tier III system? |
− | * | + | * Yes, see the {{Thread|voice-control-channel-decoding-software.26|395387-lcn-to-frequency-calculator-for-dmr-tiii.html|LCN to Frequency Calculator for Tier III}} |
+ | **Note: This will also work with other DMR types that have a defined bandplan | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
− | |||
− | |||
Revision as of 00:19, 13 August 2021
Please document any tips and tricks for programming DMR and MOTOTRBO systems, manually or with ProScan or ARC-XT, here
Required: The following firmware versions are required to copy DMR / MOTOTRBO. These are paid upgrades and applied (using the front port on the BCD996P2) using BC VUP3
- You can check your firmware version by selecting MENU --> Settings --> See Scanner Info
- Install BC VUP3.03
- Using the BC VUP Firmware Updater (3.03)
- BCD996P2: 1.08.01 or later
- BCD325P2: 1.08.01 or later
Contents
General and How Tos
- Why won't my scanner receive DMR on Slot 1 and or Slot 2
- Try reversing Slot numbers compared to System's Slot numbering.
- On DMR I can't see the Flavor Type, Color Code or Slot
- Display Mode 1 - will show the flavor (CON, CAP, XPT, etc).
- Display Mode 2 - will show the Color Code.
- Display Mode 3 - will show the slot.
- Can You Program a frequency on the 325P2 or 996P2 to show DMR information?
- Yes. When you program it, press Hold and set the mode to Digital`
- Press Func + 6. There are 3 modes; Mode 1 shows NXDN or DMR, Mode 2 shows CC or RAN, Mode 3 shows slot or UID
- Can the 325P2 and 996P2 search for a NAC (P25), Color Code (DMR), RAN or Area (NXDN)?
- Yes. Go to Srch/CloCall Opt, then Tone/Code Search, then NAC/CC/RAN/Area.
Capacity Max / Connect Plus Systems
- If the system is in the database as a Capacity Max or Connect Plus system, where can I find the color code, LCN and LSN?
- Go to the database listing
- Click on a site name under Name
- On the next form, go all the way to the bottom and look on the left for the Site Frequency Table. An example is shown on the right
Hytera Systems
- How Can I find the correct LCN to use in Uniden scanners for a Hytera System?
- If it's in the database, go to the frequency listing
- Click on a site name under Name
- On the next form, go all the way to the bottom and look on the left for the Site Frequency Table. An example is shown on the right
- Take the channel number, reduce it by 1 and divide the result by 2. This will be the LCN that Uniden scanners will recognize
Tier III (Trunking) Systems
- Is there a way to calculate the frequency from the LCN in a Tier III system?
- Yes, see the LCN to Frequency Calculator for Tier III Thread
- Note: This will also work with other DMR types that have a defined bandplan
---
- Return to Program your DMA Scanner