Programming the TRX-1 and TRX-2 for the Tennessee Homeland Security District 7 NXDN System
From The RadioReference Wiki
Programming this system for the TRX-1 and TRX-2: Program the site(s) of interest in the order shown. Set Site Threshold Low to 50%. Set Site Threshold High to 95%. Set Site Dwell to 20 (2 seconds). Set Talkgroup Delay to 20 (2 seconds). Program the RAN code as HEX - NOT DECIMAL!!! If in doubt, leave it to "ANY". Do NOT check NXDN-D setting. Set Band Plan to USA.