Actions

Difference between revisions of "BCD436HP and BCD536HP Page 2"

From The RadioReference Wiki

Line 1: Line 1:
 +
==Installation and Registration==
 +
*Where do I go to register my new scanner(s)?
 +
**Go to [http://my.uniden.com/ my.uniden.com]
  
 +
 +
* '''(BCD536HP)''' Where can I download "Wi-Fi-Updater.zip"?
 +
**Download the file from [http://info.uniden.com/UnidenMan4/BCD536HP here]
 +
**Run these updates as '''Administrator''' to ensure full hardware access.
 +
**[http://forums.radioreference.com/uniden-scanners/282848-bcd536hp-wifi-problem.html Link to Discussion Forum].
 +
 +
 +
*During installation, how do I get fix this error? "Unhandled Exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately."
 +
**Before you do the final step, do this:
 +
***Right-Click on the firmware updater program
 +
***Click Properties
 +
***Click the Compatibility tab
 +
***Check the box to enable "Run in compatibility mode"
 +
***Check the box to enable "Run as Administrator"
 +
***Click "Apply"
 +
***Then do last step.
 +
**[http://forums.radioreference.com/uniden-scanners/282848-bcd536hp-wifi-problem.html#post2115929 Link to Discussion Forum]
 +
 +
 +
* '''(BCD536HP)''' Can the power cord from BCD996XT be used with this scanner?
 +
**Yes
 +
 +
 +
==Operational==
 +
* UHF Reception is noisy; the scanner seems less sensitive on this band when compared to other radios
 +
* I get a lot of noise decoding a DMR (digital) UHF signal
 +
** See this [http://forums.radioreference.com/uniden-tech-support/337172-436-how-improve-your-uhf-reception.html thread] for a full discussion of this topic
 +
 +
 +
* Where can I learn about programming a DMR system once I have applied the upgrade?
 +
** The page where you got the upgrade also has instructions for programming and other tips. If you have further questions, post them on the [http://forums.radioreference.com/uniden-tech-support/ Uniden Tech Support forum]
 +
 +
 +
* My SD card needs to be replaced / is corrupted. Where can I find information on this?
 +
** Go to the [http://forums.radioreference.com/uniden-tech-support/340206-replacement-sd-cards.html Replacement SD Cards] thread
 +
 +
 +
* What may be a cause of the scanner rebooting itself?
 +
** SD Cards have a so-called "FAT File Limit"; they're issues related to the amount of files (not size) to be saved, before a larger card is filled: i.e 5Gb of a 16Gb card w/ between 55k and 65k files written. This may cause these scanners to begin to show signs that the data may be corrupt and the scanner reboots itself. See the question above for information on replacing SD cards. <small>''thanks Darunimal''</small>
 +
 +
 +
* Can I turn off the constant writing to the SD card?
 +
**Yes, you can. The "Replay" option is what is always writing to the SD card. It is writing continuously so the last received audio (how much depends on your setting) can be replayed. In order to do this, it is constantly recording to the SD card. As of firmware 1.09.02, Uniden added an "Off" option to the list, which disables this feature entirely. The downside - you can't replay missed audio. The upside, it's not writing to your SD card ALL THE TIME. To turn this off, do the following:
 +
#Click "Menu"
 +
#Scroll to "Settings" and select it.
 +
#Scroll to "Replay Options" and select it.
 +
#Select "Set replay Duration".
 +
#Scroll to "Off" and select it.
 +
#Press "Menu" multiple times to back out of the menu system.
 +
<small>thanks Dsaloman</small>
 +
 +
 +
 +
*My BCD436HP seems to have "gone deaf"
 +
**This is a situation where your unit has been operating without any issues, the user has made no changes to lists, the unit has not been moved, and the departments have not gone encrypted.  In other words, everything looks fine but the unit just does not receive anything anymore.  You will say, "It was working yesterday but today I'm not receiving anything."  If you cannot even receive NOAA broadcasts, your unit has "gone deaf" and will need to be repaired.  This is a repair covered under the Uniden one-year from purchase warranty and involves replacing the Q2 and Q3 circuits.  When you ship the unit, describe the problem as "No channel reception."  Instructions for shipping may be found [http://www.uniden.com/product-repair/page/productrepair here].
 +
 +
 +
* '''(BCD536HP) '''Can I access the discriminator?
 +
**Rich Carlson detailed how to tap the discriminator in this forum thread: [http://forums.radioreference.com/uniden-scanners/283316-bcd536hp-discriminator-inside-look.html Discriminator Tap Mod]
 +
 +
 +
* The audio from my simulcast digital system is lousy / distorted. What is wrong?
 +
** See the [[Simulcast digital distortion]] article for a full explanation
 +
** Also see the [http://forums.radioreference.com/uniden-tech-support/267424-loose-open-squelch-improves-lsm-simulcast-reception.html Loose Open Squelch Improves Simulcast Reception] thread
 +
 +
 +
*I'm having trouble receiving P25 systems. Is there a fix?
 +
**[http://forums.radioreference.com/uniden-scanners/285012-bcd536hp-bcd436hp-test-p25-decode-improvement.html UPMan's suggestion for P25 reception]
 +
 +
 +
*If I am having headphones-issues, what can I do?
 +
**[http://forums.radioreference.com/uniden-scanners/283740-bcd536hp-headphone-issues.html Please read UPMan's answer in the forums]
 +
 +
 +
* Return to [[BCD436HP]]
 +
* Return to [[BCD536HP]]
 
* Return to the [[BCD436HP and BCD536HP Scanner FAQ]]
 
* Return to the [[BCD436HP and BCD536HP Scanner FAQ]]
  

Revision as of 20:02, 23 October 2016

Installation and Registration


  • (BCD536HP) Where can I download "Wi-Fi-Updater.zip"?


  • During installation, how do I get fix this error? "Unhandled Exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately."
    • Before you do the final step, do this:
      • Right-Click on the firmware updater program
      • Click Properties
      • Click the Compatibility tab
      • Check the box to enable "Run in compatibility mode"
      • Check the box to enable "Run as Administrator"
      • Click "Apply"
      • Then do last step.
    • Link to Discussion Forum


  • (BCD536HP) Can the power cord from BCD996XT be used with this scanner?
    • Yes


Operational

  • UHF Reception is noisy; the scanner seems less sensitive on this band when compared to other radios
  • I get a lot of noise decoding a DMR (digital) UHF signal
    • See this thread for a full discussion of this topic


  • Where can I learn about programming a DMR system once I have applied the upgrade?
    • The page where you got the upgrade also has instructions for programming and other tips. If you have further questions, post them on the Uniden Tech Support forum


  • My SD card needs to be replaced / is corrupted. Where can I find information on this?


  • What may be a cause of the scanner rebooting itself?
    • SD Cards have a so-called "FAT File Limit"; they're issues related to the amount of files (not size) to be saved, before a larger card is filled: i.e 5Gb of a 16Gb card w/ between 55k and 65k files written. This may cause these scanners to begin to show signs that the data may be corrupt and the scanner reboots itself. See the question above for information on replacing SD cards. thanks Darunimal


  • Can I turn off the constant writing to the SD card?
    • Yes, you can. The "Replay" option is what is always writing to the SD card. It is writing continuously so the last received audio (how much depends on your setting) can be replayed. In order to do this, it is constantly recording to the SD card. As of firmware 1.09.02, Uniden added an "Off" option to the list, which disables this feature entirely. The downside - you can't replay missed audio. The upside, it's not writing to your SD card ALL THE TIME. To turn this off, do the following:
  1. Click "Menu"
  2. Scroll to "Settings" and select it.
  3. Scroll to "Replay Options" and select it.
  4. Select "Set replay Duration".
  5. Scroll to "Off" and select it.
  6. Press "Menu" multiple times to back out of the menu system.

thanks Dsaloman


  • My BCD436HP seems to have "gone deaf"
    • This is a situation where your unit has been operating without any issues, the user has made no changes to lists, the unit has not been moved, and the departments have not gone encrypted. In other words, everything looks fine but the unit just does not receive anything anymore. You will say, "It was working yesterday but today I'm not receiving anything." If you cannot even receive NOAA broadcasts, your unit has "gone deaf" and will need to be repaired. This is a repair covered under the Uniden one-year from purchase warranty and involves replacing the Q2 and Q3 circuits. When you ship the unit, describe the problem as "No channel reception." Instructions for shipping may be found here.


  • (BCD536HP) Can I access the discriminator?