Actions

Difference between revisions of "Connecting scanners via USB"

From The RadioReference Wiki

(edits to remove RS USB references)
(16 intermediate revisions by 3 users not shown)
Line 3: Line 3:
  
 
==GRE Scanners==
 
==GRE Scanners==
* The [[PSR-500]] and [[PSR-600]] both come with their own USB cable
+
* The [[PSR-500]] and [[PSR-600]] both came with their own USB cable
* These scanners should be able to use the Whistler cable, listed below.
+
* These scanners are able to use the Whistler cables.
* The PC / IF 30-290 Data Cable Driver can be found at the [http://www.greamerica.com/ GRE America website]
+
* If you are using the older GRE cable, the PC/IF 30-290 Data Cable Driver can be found at the [http://www.greamerica.com/ GRE America website]
  
  
 
==Radio Shack Scanners==
 
==Radio Shack Scanners==
* RS USB cable SKUs (might be found in remaining stores)
+
* RS USB cable SKUs (used for historical reference only)
** RS 20-546 USB Cable
+
** 20-047
*** [https://www.radioshack.com/collections/radio-communication/products/radioshack-usb-pc-scanner-programming-cable RS USB PC Cable]
+
** 20-546  
*** [http://www.amazon.com/RadioShack-20-546-USB-PC-Scanner-Programming/dp/B00686DND6/ref=sr_1_18?s=electronics&ie=UTF8&qid=1451231476&sr=1-18&keywords=radio+shack+scanner 20-546 Cable on Amazon]
+
* The Whistler cables are known to work with many of the RS scanners including the [[Pro-106]] and [[Pro-197]]
** RS 20-047 USB Cable
 
** [http://www.ftdichip.com/Drivers/VCP.htm FTDI Virtual Com Port (VCP) Drivers]
 
; Notes
 
* Unlike their GRE brothers, the [[Pro-106]] and [[Pro-197]] do '''not''' come with the USB cable; you must buy it separately
 
* The PRO-94 came out with a B version years ago which is the only one that is PC addressable (up/download data only)
 
* The PRO-2052 is a Uniden product with a DB9 connector in the back. See the Uniden section below for more information
 
* The original version of the PRO-92 requires the pigtail- the A and B models don't
 
  
  
Line 59: Line 52:
 
|
 
|
 
|-
 
|-
|[[Pro-92]]
+
|[[Pro-92]] <sup>1</sup>
|see notes above
+
||
 
|[[Pro-2067]]
 
|[[Pro-2067]]
 
|{{color|red|NO}}
 
|{{color|red|NO}}
 +
|-
 +
|
 +
|
 +
|[[Pro-2052]]<sup>3</sup>
 +
||
 
|-
 
|-
 
|[[Pro-93]]
 
|[[Pro-93]]
Line 70: Line 68:
 
|
 
|
 
|-
 
|-
|[[Pro-94]]
+
|[[Pro-94]]<sup>2</sup>
 
|{{color|green|YES}}
 
|{{color|green|YES}}
 
|
 
|
Line 102: Line 100:
 
|
 
|
 
|-
 
|-
|[[Pro-106]]
+
|[[Pro-106]]<sup>4</sup>
 
|{{color|red|NO}}
 
|{{color|red|NO}}
|[[Pro-197]]
+
|[[Pro-197]]<sup>4</sup>
 
|{{color|red|NO}}
 
|{{color|red|NO}}
 
|-
 
|-
Line 149: Line 147:
 
|-
 
|-
 
|}
 
|}
 +
 +
 +
;Notes
 +
#The original version of the PRO-92 requires the pigtail- the A and B models don't
 +
#The PRO-94 came out with a B version years ago which is the only one that is PC addressable (up/download data only)
 +
#The PRO-2052 is a Uniden product with a DB9 connector in the back. See the Uniden section below for more information
 +
#Unlike their GRE and Whistler brothers, the [[Pro-106]] and [[Pro-197]] do '''not''' come with the USB cable; you must buy it separately
  
  
Line 164: Line 169:
 
** [http://info.uniden.com/twiki/bin/view/UnidenMan4/USB-1Drivers The latest Uniden USB-1 drivers, ''install Driver prior to cable installation'' ]
 
** [http://info.uniden.com/twiki/bin/view/UnidenMan4/USB-1Drivers The latest Uniden USB-1 drivers, ''install Driver prior to cable installation'' ]
 
*** ''NOTE: Uniden handhelds often include a Serial programming cable (DB9 to DB9 or DB9 to a proprietary small 4 Pin Serial Connection); a USB-1 cable or a USB to RS-232 converter may be required to interface with PCs that lack serial ports.''
 
*** ''NOTE: Uniden handhelds often include a Serial programming cable (DB9 to DB9 or DB9 to a proprietary small 4 Pin Serial Connection); a USB-1 cable or a USB to RS-232 converter may be required to interface with PCs that lack serial ports.''
 +
  
 
==Whistler Products==
 
==Whistler Products==
 +
* [https://whistlergroup.com/collections/scanner-accessories/products/pc-interface-cable-for-ws1040-ws1065 Whistler USB Cable for WS-1040 and WS-1065]
 
* [https://whistlergroup.com/collections/scanner-accessories/products/usb-cable-for-ws1080-only Whistler USB Cable for WS-1080]
 
* [https://whistlergroup.com/collections/scanner-accessories/products/usb-cable-for-ws1080-only Whistler USB Cable for WS-1080]
 +
 +
 +
==Aftermarket Cables for GRE / RS / Whistler Scanners==
 +
* [https://www.valley-ent.com/store/radio-shack-ftdi-usb-scanner-programming-cable-20-546.html Valley Enterprises FTDI chipset USB cable] (direct)
 +
* [http://www.ebay.com/itm/351623722795?rmvSB=true Valley Enterprises FTDI chipset USB cable] (via eBay)
 +
* [http://www.ftdichip.com/Drivers/VCP.htm FTDI Virtual Com Port (VCP) Drivers]
 +
*{{Thread|radio-shack-scanners|348173-whistler-gre-rs-usb-programming-cable-diy.html|A DIY (Do It Yourself) GRE/RS/Whistler Cable}}
 +
  
 
==Generic USB to RS-232 serial converters==
 
==Generic USB to RS-232 serial converters==
Line 188: Line 203:
 
; USB/Serial Devices
 
; USB/Serial Devices
 
* [https://www.argentdata.com/catalog/product_info.php?cPath=21&products_id=46&osCsid=2e29392db62c79759bc604033542e5a3 Argent Data Serial to USB adapter]
 
* [https://www.argentdata.com/catalog/product_info.php?cPath=21&products_id=46&osCsid=2e29392db62c79759bc604033542e5a3 Argent Data Serial to USB adapter]
* [http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=us232r&x=21&y=4 Digi-Key - 768-1013-ND (Manufacturer - US232R-10-BLK)]
+
* [http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=us232r&x=21&y=4 Digi-Key - 768-1013-ND (Manufacturer - US232R-10-BLK)] - FTDI USB to RS232 cables
 
*[http://www.bestbuy.com/site/dynex-16-usb-pda-serial-adapter-cable/7135664.p?id=1110263657278&skuId=7135664&ref=199&loc=je6NUbpObpQ&siteID=je6NUbpObpQ-8LFIfbWxnJY_59xzn5g1RA Dynex 16 inch USB PDA Serial Cable (via Best Buy)]
 
*[http://www.bestbuy.com/site/dynex-16-usb-pda-serial-adapter-cable/7135664.p?id=1110263657278&skuId=7135664&ref=199&loc=je6NUbpObpQ&siteID=je6NUbpObpQ-8LFIfbWxnJY_59xzn5g1RA Dynex 16 inch USB PDA Serial Cable (via Best Buy)]
 
* [http://www.digi.com/products/usb/edgeport Edgeport USB-Serial devices (via Digi)]
 
* [http://www.digi.com/products/usb/edgeport Edgeport USB-Serial devices (via Digi)]
Line 224: Line 239:
  
 
===Checklist and Procedures===
 
===Checklist and Procedures===
<gallery>
 
Image:No_USB_to_Serial.jpg|Figure 1
 
Image:Instslled_USB_to_Serial.jpg|Figure 2
 
</gallery>
 
 
 
*'''CAUTION:''' There have been numerous reports of drivers for devices that are not compatible with (or do not supply a driver for) Windows 7 64 bit. Make sure your device has a driver that is compatible before proceeding
 
*'''CAUTION:''' There have been numerous reports of drivers for devices that are not compatible with (or do not supply a driver for) Windows 7 64 bit. Make sure your device has a driver that is compatible before proceeding
 +
[[Image:No_USB_to_Serial.jpg|360px|right| NO USB to Serial - Click to view full size]]
  
 
#Use Device Manager to determine if other COM ports are available, and not held by Bluetooth or other devices. Sometimes such devices will hold an address even if it's not actually in use (Figure 1).
 
#Use Device Manager to determine if other COM ports are available, and not held by Bluetooth or other devices. Sometimes such devices will hold an address even if it's not actually in use (Figure 1).
 
#Download the most up to date drivers from the manufacturer or distributor and install. Figure 2 shows one possible result. At this point you need to validate if your application can actually address the COM port that has been assigned. If it can't...
 
#Download the most up to date drivers from the manufacturer or distributor and install. Figure 2 shows one possible result. At this point you need to validate if your application can actually address the COM port that has been assigned. If it can't...
##In the 'Ports (COM & LPT)' section of Device Manager you should see an entry that reads something like 'Serial on USB Port (COM 15)'. The actual text will vary with the driver's documentation
 
##Select the Serial Device Entry in the list
 
##Right click on it and select Properties
 
##Select the Port Settings tab and click on the Advanced button. Change the COM port address.
 
##Also in the Advanced menu, make sure the speed on the com port matches the speed the scanner is expecting, and also matches whatever the software is expecting
 
#Connect the adapter 
 
#Connect the cable from the scanner
 
  
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
-------------
 +
[[Image:Instslled_USB_to_Serial.jpg|360px|right| Installed Comport USB Driver - Click to view full size ]]
 +
 +
#In the 'Ports (COM & LPT)' section of Device Manager you should see an entry that reads something like 'Serial on USB Port (COM 15)'. The actual text will vary with the driver's documentation
 +
#Select the Serial Device Entry in the list
 +
#Right click on it and select Properties
 +
#Select the Port Settings tab and click on the Advanced button. Change the COM port address.
 +
#Also in the Advanced menu, make sure the speed on the com port matches the speed the scanner is expecting, and also matches whatever the software is expecting
  
 
===Uniden Scanner Port Settings===
 
===Uniden Scanner Port Settings===

Revision as of 14:01, 12 September 2017

With the lack of serial ports on newer PCs these days, having to connect to a USB port is a necessary, but sometimes frustrating, evil. The listings below detail which USB cable to buy, and other important conditions.


GRE Scanners

  • The PSR-500 and PSR-600 both came with their own USB cable
  • These scanners are able to use the Whistler cables.
  • If you are using the older GRE cable, the PC/IF 30-290 Data Cable Driver can be found at the GRE America website


Radio Shack Scanners

  • RS USB cable SKUs (used for historical reference only)
    • 20-047
    • 20-546
  • The Whistler cables are known to work with many of the RS scanners including the Pro-106 and Pro-197


Pigtail Usage Cross Reference Table
Model Use RS Pigtail? Model Use RS Pigtail?
Pro-76 Pro-2016
Pro-79 YES Pro-2017
Pro-82
Pro-83 YES
Pro-84 YES
Pro-89 YES
Pro-92 1 Pro-2067 NO
Pro-20523
Pro-93 NO Pro-2053 NO
Pro-942 YES
Pro-95 NO
Pro-96 NO Pro-2096 NO
Pro-2051 YES
Pro-97 NO Pro-2055 NO
Pro-99 NO
Pro-1064 NO Pro-1974 NO
Pro-107 N/A
Pro-135
Pro-137 NO
Pro-162 NO Pro-160 NO
Pro-164 NO Pro-163 NO
Pro-404 NO
Pro-528 NO Pro-433 NO
Pro-405


Notes
  1. The original version of the PRO-92 requires the pigtail- the A and B models don't
  2. The PRO-94 came out with a B version years ago which is the only one that is PC addressable (up/download data only)
  3. The PRO-2052 is a Uniden product with a DB9 connector in the back. See the Uniden section below for more information
  4. Unlike their GRE and Whistler brothers, the Pro-106 and Pro-197 do not come with the USB cable; you must buy it separately


Uniden Scanners

Drivers


Whistler Products


Aftermarket Cables for GRE / RS / Whistler Scanners


Generic USB to RS-232 serial converters

If the programming cable for your radio requires an Serial interface (DB9 female) and your computer only has USB ports, you will need to utilize a USB to Serial (DB9 male) Converter. They are available from various retailers. Cables which use the FTDI chip or authentic Prolific PL2303 chipsets work the most reliably.

Uniden's USB-1 cable, as well as cables provided by GRE and RadioShack use only authentic chipsets, and are more likely to include continued forward support.
  • Note: some very inexpensive converter cables (<$10) are available, but many use counterfeit chipsets; Prolific has made their 2013+ drivers incompatible with inauthentic chips.
  • Note: older Uniden USB-1 cables may not be able to work with newest driver and an older driver may be need pre-2012 click here for older driver.


Driver websites
From the CHIRP Wiki


USB/Serial Devices

Installation Notes

Accessing Device Manager

Unfortunately sometimes ports aren't available when you think they are, or everything appears to have installed correctly, but still doesn't seem to work. The tool that will allow you to diagnose these issues is Device Manager. You can access this tool in several ways, depending on the OS:

  • XP: Start>Control Panel>System>Hardware>Click on the Device Manager button.
  • Vista: Control Panel>System and Maintenance>Device Manager
  • Win7: Control Panel>System and Security>System>Device Manager
  • Click on Start in the Taskbar then Run and enter devmgmt.msc in the resulting box
  • Press the Windows key+R, in the resulting menu type 'devmgmt.msc'
  • Click Start --> Right click on My Computer and select Properties, click the Device Manager link on the left.
  • Press the Windows key + pause/break key
  • Set up a .bat file with the following using Notepad or Wordpad. When you want to run this, right click on it, select Run as Administrator (Vista, Win7)
set devmgr_show_nonpresent_devices=1
cd %SystemRoot%\System32
start devmgmt.msc

Checklist and Procedures

  • CAUTION: There have been numerous reports of drivers for devices that are not compatible with (or do not supply a driver for) Windows 7 64 bit. Make sure your device has a driver that is compatible before proceeding
NO USB to Serial - Click to view full size
  1. Use Device Manager to determine if other COM ports are available, and not held by Bluetooth or other devices. Sometimes such devices will hold an address even if it's not actually in use (Figure 1).
  2. Download the most up to date drivers from the manufacturer or distributor and install. Figure 2 shows one possible result. At this point you need to validate if your application can actually address the COM port that has been assigned. If it can't...









Installed Comport USB Driver - Click to view full size
  1. In the 'Ports (COM & LPT)' section of Device Manager you should see an entry that reads something like 'Serial on USB Port (COM 15)'. The actual text will vary with the driver's documentation
  2. Select the Serial Device Entry in the list
  3. Right click on it and select Properties
  4. Select the Port Settings tab and click on the Advanced button. Change the COM port address.
  5. Also in the Advanced menu, make sure the speed on the com port matches the speed the scanner is expecting, and also matches whatever the software is expecting

Uniden Scanner Port Settings

Scanner Setting to engage an open com port, some models require the GPS Port to be turned on inside the scanner, some use the term PC CONTROL, or SERIAL PORT, some automatically connect with proper USB driver for the scanner, most user connect and never have a problem some take the necessary step to save all drivers use and working and it's suggested to do just that. Sometimes a scanner will register as 'not connected' until this procedure is completed. It's beyond the scope of this article to detail this, as it tends to vary from scanner to scanner. For the Uniden DMA driven scanners, see the Freescan - Connecting Scanner to PC article which has a summary (from the Easier to Read manuals) of the MENU commands necessary to set up the speeds for the port(s). For all others, look in the scanner's manual for the keystrokes needed to put the scanner in "RMT" REMOTE (or similar) mode.

  • Note: Common transfer modes tend to work are: 9600bps, 57,600bps and 115,200bps Note, some devices don't like to be completely erased at its' highest transfer rate, safer erasing is believed to best done at a mid to slow rate.
    • For GPS users return the port speed to its correct setting.

Windows 8 Issues and Solutions

Cables Known to be Compatible with Win 8.x


Websites With Win 8.x Information


RadioReference Forum Threads on USB Issues

Windows 10 Discussions


Software Setup for Linux

Unlike Windows Linux doesn't require drivers even for RS-232 to USB adapters. "It just works". Several Windows applications will also run on Linux with the use of Wine.

Related Links

Freescan - Connecting Scanner to PC