Difference between revisions of "GP68"
From The RadioReference Wiki
(New page: ==Programming== *Turn the radio on. The radio will either be in memory channel mode or VFO (scrach pad) mode. *Enter programming mode by holding down PTT, MON and Scan key while powering...) |
|||
| Line 3: | Line 3: | ||
The radio will either be in memory channel mode or VFO (scrach pad) mode. | The radio will either be in memory channel mode or VFO (scrach pad) mode. | ||
*Enter programming mode by holding down PTT, MON and Scan key while powering up radio. | *Enter programming mode by holding down PTT, MON and Scan key while powering up radio. | ||
| + | *Press left arrow to enter VFO mode | ||
| + | *Enter receive frequency then short press Enter (yellow button above PTT) | ||
| + | Step size can be changed by holding down the LOW key for three seconds then selecting | ||
| + | the correct size with the channel rotary knob then press yellow Enter to confirm. | ||
[[Category:Professional Radios]] | [[Category:Professional Radios]] | ||
Revision as of 03:01, 7 March 2010
Programming
- Turn the radio on.
The radio will either be in memory channel mode or VFO (scrach pad) mode.
- Enter programming mode by holding down PTT, MON and Scan key while powering up radio.
- Press left arrow to enter VFO mode
- Enter receive frequency then short press Enter (yellow button above PTT)
Step size can be changed by holding down the LOW key for three seconds then selecting
the correct size with the channel rotary knob then press yellow Enter to confirm.