PSR-800, Pro-668 and WS1080 Error Codes

• As these 3 scanners are basically identical, this data should be common for all 3 scanners.

• Discussion: Pro-668 Error Codes Thread

Error Code	Error Type	Suggested Solution
01-00	General heap error	Provide error code information in Yahoo group or forum
01-01	Unable to allocate from heap	Same as above
02-00	Unknown object type in data	Use PC Application to delete any corrupted objects or create a new configuration
02-01	Unknown TSYS type in data	Use PC Application to delete any corrupted TSYS objects or create a new configuration
03-00	No MicroSD Card inserted	Ensure that a properly formatted MicroSD card is fully inserted and locked in the MicroSD slot.
03-01	General error initializing file system	Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
03-02	Cluster size bad	Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
03-03	Error reading MicroSD card	Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
03-04	Error writing MicroSD card	Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
03-05	MicroSD Card is full	Reduce size of configuration, remove unnecessary audio recordings or switch to a MicroSD card with more capacity.
03-06	MicroSD Card is write protected	Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
03-07	Mass storage mode is active	Under normal conditions this error should not appear. Mass storage device mode is disabled when the scanner is connected to a computer and scanning. Disconnect the radio from the computer, wait a few seconds, then reconnect. Contact GRE Support if the problem persists.
03-08	Unknown MicroSD card read/write error	Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
04-00	Initialization error	Provide error code information to Yahoo group or forum
04-01	Initialization error	Same as above
04-02	Firmware load error	Same as above
05-00	Unable to load CONFIG__.BIN	Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
05-01	CONFIG__.BIN file error	Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
05-02	CONFIG__.BIN file error	Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
05-03	CONFIG__.BIN file error	Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.