Difference between revisions of "Pro-106 and Pro-197 CPU/DSP Upgrades"
From The RadioReference Wiki
m (used Template:Thread) |
|||
| Line 7: | Line 7: | ||
YOUR RADIO WILL NOT WORK ANYMORE! | YOUR RADIO WILL NOT WORK ANYMORE! | ||
See for more info - {{Thread|gre-scanners|303131-gre-made-scanner-firmware-update.html|GRE made Scanner Firmware Update}} | See for more info - {{Thread|gre-scanners|303131-gre-made-scanner-firmware-update.html|GRE made Scanner Firmware Update}} | ||
| − | * [https://www.dropbox.com/s/o7yre6f2utqdkdl/RS%20PRO-106%20197%20CPU%20Firmware%20Upgrade%20Instructions%20v2.1.zip?dl= | + | * [https://www.dropbox.com/s/o7yre6f2utqdkdl/RS%20PRO-106%20197%20CPU%20Firmware%20Upgrade%20Instructions%20v2.1.zip?dl=1 CPU 2.1 Firmware & DSP 1.4] |
* [https://app.box.com/s/gzwc3mc4bjq6m9ghdwpe 1.9, 2.0 & 2.1 CPU Firmwares] | * [https://app.box.com/s/gzwc3mc4bjq6m9ghdwpe 1.9, 2.0 & 2.1 CPU Firmwares] | ||
Revision as of 19:18, 6 September 2018
Please use this article to document all CPU and DSP upgrades for the Radio Shack Pro-197 and Pro-106 scanners.
To find the updates, see the scanner's Yahoo group, or check the next section
Contents
Firmware downloads
IMPORTANT! DO NOT USE THESE ON WHISTLER MADE SCANNERS / PRO 651/652 RADIOS! YOUR RADIO WILL NOT WORK ANYMORE! See for more info - GRE made Scanner Firmware Update Thread
Display Current Firmware Level
You can check the firmware version levels by pressing '3' while the scanner's powerup Welcome Message is displayed.
A sample output (Latest versions shown):
- uP App Ver: RF2.1
- DSP AppVer: RF1.4
- DSP VocVer: RF1.0
CPU 2.1 Upgrade
- Discussion thread: here
CPU 2.1 fixes
- Fixed Marine, VHF, and UHF search frequencies
CPU 2.0 Upgrade
- Discussion thread: here
CPU 2.0 fixes
- Pressing the ATT key during scanning while on a CONV object causes the object to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check.
- Changed 154-156MHz range to accommodate Marine channels
- Added duplicate checking to conventional channels created via PGM NEW CONV
CPU 1.9 Upgrade
- Discussion thread: here
CPU 1.9 fixes
- Pressing the ATT key during scanning while on a CONV object causes the object to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check
CPU 1.8 and DSP 1.4 Upgrades
- Discussion thread: here
CPU 1.8 fixes
- Adds patch support for P25, Motorola and EDACS trunking
- Changes CCDump type string to "EDn" if "narrow invert" is turned on
- Corrects LCD “mirror image” issue
DSP 1.4 fixes
- Minimizes the possibility of a previous NAC displayed on a new transmission.