Actions

RR Wiki Extensions

From The RadioReference Wiki

The RadioReference Wiki has some custom extensions. Many of these can be used to display dynamic data in the database of custom pages of information. They are currently as follows:

Displaying Conventional Frequencies

You can display conventional frequencies stored in the database with the following tag:

<freqsubcat>xxx</freqsubcat>

Where:

xxx = The Frequency Subcategory ID 

To find the subcat ID, click on the left arrow, and the following results:

Csid1.jpg

Click the "View Subcategory Details" button, and the following will result with the Unique ID.

Csid2.jpg

Displaying Frequencies for a Trunked System

You can display the frequencies for a Trunked Radio System in the database with the following tag:

<site>xxx|sssss</site>

Where:

xxx = The Trunked Radio Database sid number 
sssss  = The system's Unique DB Site ID

To find the "sid" for a trunked system, look in the URL for each trunked system entry:

Determining Trunked System SID

Next to the site number (shown circled on the left) is the site name. If there is more than one site, you must choose which site name you wish to display. In this case, click on Severy

Finding the site number
Use the Unique DB Site ID as the second value for the tag.


So in this case, the correct site tag would read:

<site>4390|8562</site>

Displaying Talkgroups

You can display the talkgroups for a Trunked Radio System in the database with the following tag:

<tg>xxx|yyyyy</tg>

Where:

xxx = The Trunked Radio Database sid number
yyyyy  = The unique ID that's shown in the 2nd image below

The SID is found using the method above. This is the first value in the tag.
To find the unique ID, go down to the desired talkgroups and point at the left arrow. The following display results:

Tgcatid1.jpg

Click on it, and the following image results. Use the Unique ID as the 2nd value in the tag.

Tgcatid2.jpg


In this case, the complete tag would read:

<tg>4390|10257</tg>


If you want to display all talkgroups for the system in one single table, use "All" as the Unique ID. For example:

<tg>4390|All</tg>

Displaying Recently Updated Frequencies and Talkgroups

You've submitted changes to the database, they've been entered - why can't I see the changes on the Wiki?

The reason is that you are getting your old page from the Wiki's page cache. The cache not only stores a local copy of the page, but also stores the last execution of any extensions. What is needed, therefore, is a way to flush the cache so that the extensions pull data from the database again. To accomplish this, install the Refreshpage template somewhere on the page (preferably at the end of the article, or the last call to the extensions). It only needs to show up once on the article; all extension calls on the page will be refreshed at the same time. It is written with the <small> tag so that the text does not overly distract the user from reading the rest of the article. The use of the Refreshpage template is strongly encouraged.

To install it, copy the code below, substituting the URL of the page being edited after the ‘’Pageurl=” statement. Remove the nowiki tags from either end of the statement;

{{Refreshpage |Pageurl=Place the URL of the page you wish to refresh here}}

If you are viewing the page from a redirected link (commonly from the Nationwide database listing), be sure to press the Page tab on the left to obtain the URL. Don't use the redirected URL.

This template will cause a blue ‘Refresh’ statement (in small print) to be generated. Pressing this will cause the page to be flushed from the wiki’s queue. The wiki will then get a new copy of the page, and the extensions will execute, pulling any new data into the article.

Displaying EBay Search Results

The Ebay extension is no longer available.