Difference between revisions of "Ka3jjz"
From The RadioReference Wiki
m |
|||
| Line 12: | Line 12: | ||
| − | #Start the | + | #Start the GREFwTool tool |
#Take the batteries out of your scanner and unplug it | #Take the batteries out of your scanner and unplug it | ||
| − | #Press and hold the | + | #Press and hold the '''Menu''' button while inserting the USB cable (one end already plugged into the computer). Once plugged in, let go of the '''Menu''' button. '''Wait''' for the beep from your computer. It could take up to 30 seconds. |
| − | #In | + | #In GREFwTool go to '''Settings''' and press '''Rescan'''. The COM port should be filled in. For '''Scanner Type''' use the pulldown to select the scanner you are using (i.e. Pro-668). For '''Firmware''' use the pulldown to select what you want the scanner to become (WS1080) |
| − | #Select | + | #Select the '''Connect To Scanner''' icon |
| − | #Select | + | #Select the '''Update Firmware in Scanner''' icon, Select the firmware file ''ws1080e U3.8.bin'' ('''Do Not''' select the download firmware button! it will give you the latest and it only partially works. It will not provide DMR, DIGITAL or P25 on your scanner as of this writing) Your scanner should now be upgrading the firmware. It will shut down when done. |
| − | #Go into EZScan ('''not IScan''') do the DSP | + | #Go into EZScan ('''not IScan''') do the '''DSP Update''', library updates and/or restore from archive or transfer database if needed. via the cable or card reader |
##'''Do not allow a firmware update until further notice and testing shows another firmware works 100%''' | ##'''Do not allow a firmware update until further notice and testing shows another firmware works 100%''' | ||
#Turn your scanner on, if it loads fine and works, put the batteries in | #Turn your scanner on, if it loads fine and works, put the batteries in | ||
Revision as of 19:28, 31 January 2017
RadioReference, its officers, administrators and moderators, do not endorse the use of this procedure or any firmware modifications of any kind used in this process in any manner, including responsibility for repairing a non-operative scanner. The user assumes all responsibility when utilizing this procedure, including the possibility, however remote, of rendering your scanner inoperative. RS will likely void any warranty that originally applied to this scanner if this process is utilized. Bottom line, you are on your own if something goes wrong.
The following assumes you already have the GREFwTool together with the firmware 3.8 in that folder, and EZScan software on your computer and you have archived your data. This process is described, in detail, in this Thread
- Start the GREFwTool tool
- Take the batteries out of your scanner and unplug it
- Press and hold the Menu button while inserting the USB cable (one end already plugged into the computer). Once plugged in, let go of the Menu button. Wait for the beep from your computer. It could take up to 30 seconds.
- In GREFwTool go to Settings and press Rescan. The COM port should be filled in. For Scanner Type use the pulldown to select the scanner you are using (i.e. Pro-668). For Firmware use the pulldown to select what you want the scanner to become (WS1080)
- Select the Connect To Scanner icon
- Select the Update Firmware in Scanner icon, Select the firmware file ws1080e U3.8.bin (Do Not select the download firmware button! it will give you the latest and it only partially works. It will not provide DMR, DIGITAL or P25 on your scanner as of this writing) Your scanner should now be upgrading the firmware. It will shut down when done.
- Go into EZScan (not IScan) do the DSP Update, library updates and/or restore from archive or transfer database if needed. via the cable or card reader
- Do not allow a firmware update until further notice and testing shows another firmware works 100%
- Turn your scanner on, if it loads fine and works, put the batteries in