Actions

RadioReference Wiki

Difference between revisions of "Ka3jjz"

From The RadioReference Wiki

Line 9: Line 9:
  
 
* Digital amateur signals are restricted to certain portions of the bands. [http://www.arrl.org/FandES/field/regulations/allocate.html Here] is a general list of bands which shows the sections restricted to CW (Morse Code) and digital
 
* Digital amateur signals are restricted to certain portions of the bands. [http://www.arrl.org/FandES/field/regulations/allocate.html Here] is a general list of bands which shows the sections restricted to CW (Morse Code) and digital
 +
  
 
==Where Can I Find Information on the Various Modes?==
 
==Where Can I Find Information on the Various Modes?==

Revision as of 09:22, 28 October 2014

Amateur Radio Digital Operations

Ham radio on HF is not only about voice and CW (morse code) - there's a considerable amount of digital transmissions too.

This page is an introduction to this topic - please feel free to add or correct anything found here. It's not intended to be comprehensive, but does touch on all the topics you will need to consider before getting involved in this side of the hobby.


General Information

  • Digital amateur signals are restricted to certain portions of the bands. Here is a general list of bands which shows the sections restricted to CW (Morse Code) and digital


Where Can I Find Information on the Various Modes?

This listing is not complete, but it gives a good representation of the various modes you will find on the HF Amateur bands. Please feel free to substitute links, and add modes that are not listed here.


How Do I Connect My Transceiver and PC?

There are still some folks that connect their transceivers to a Terminal Node Controller or TNC such as the Kantronics KAM-XL). There are several advantages - transmit keying, isolation and audio are all handled in a single box. Unfortunately sometimes these TNCs are a bit limited in the modes they cover. Without firmware updates, you are limited to the modes the TNC covers.

Far and away the more popular way to go is via the soundcard. There are several models such as the Tigertronics SignaLink. These devices remove the restriction of only working on some modes - there's usually a wide variety of software vailable, and in this case, all the transmit keying and audio is also in a single box.

There are other soundcard devices that simply feed audio back and forth from the transceiver, but you would need to build your own keying circuit for your transceiver. Fortunately there are many such schematics on the web.

See the Utility Monitoring Central Hardware page for examples of each.

The next challenge is to determine how to wire the microphone or other jack from your transceiver to the PC or TNC. This varies from model to model, and can be difficult to determine without a manual. Fortunately there is a website that show the wiring diagrams for many different transceivers. In addition, there are numerous Yahoo groups devoted to particular model(s) of transceivers, and is a likely alternative for finding this information if that website doesn't have it.


What Software Can I Use?

This list is just a sample of some of the more popular (and some lesser-known) packages that can copy some or all of these modes. Additions are solicited. There are also several websites with audio (and sonogram) samples of many digital modes to aid in learning what a particular mode sounds and looks like.


Audio Samples


Slow Scan TV (SSTV)

  • What is SSTV (Slow Scan TV)?


Where Can I Find Additional Resources?

References
  • link to ARRL book


Mailing Lists