Difference between revisions of "Ka3jjz"
From The RadioReference Wiki
| Line 1: | Line 1: | ||
| − | #You must | + | #You must have the drivers for the PRO-668, PRO-18 or PSR-800 (whichever scanner you are updating) functioning. |
| + | #If you wish to use version 4.5 of the firmware, someone must send you a copy. Version 4.6 will be downloaded by using the correct version of GREFWtool (see the file size note below) | ||
#Install [https://github.com/LinuxSheeple-E/GREFwTool/wiki GREFwTool]. Note the various versions are dependent on the firmware and your OS. The version history is found at the bottom of that page | #Install [https://github.com/LinuxSheeple-E/GREFwTool/wiki GREFwTool]. Note the various versions are dependent on the firmware and your OS. The version history is found at the bottom of that page | ||
##If you are installing firmware version 4.5, use version 0.2.0.3 | ##If you are installing firmware version 4.5, use version 0.2.0.3 | ||
Revision as of 15:24, 23 March 2017
- You must have the drivers for the PRO-668, PRO-18 or PSR-800 (whichever scanner you are updating) functioning.
- If you wish to use version 4.5 of the firmware, someone must send you a copy. Version 4.6 will be downloaded by using the correct version of GREFWtool (see the file size note below)
- Install GREFwTool. Note the various versions are dependent on the firmware and your OS. The version history is found at the bottom of that page
- If you are installing firmware version 4.5, use version 0.2.0.3
- If you are installing firmware version 4.6, the file size must be 368340 bytes. A file size of 524292 bytes will not work. The file name is WS1080e_U4.6 bin
- Make sure you get version 0.3.1.5 of GREFWtool. This is especially important if you are running WinXP. If you have version 0.3.0.4 from a previous installation, there's no need to upgrade it. Versions 0.3x will handle earlier firmware versions if needed.
- If you don't already have it,
- Always back up your data before proceeding