BC898T

500 Channel Programmable Base Scanner with TrunkTracker III

General Specifications

Rebanding supported? YES
Multiple Channels (500) / Banks (10)
Frequency Coverage
- 25-54 MHz
- 108-174 MHz
- 216-512 MHz
- 806-956 MHz (excluding cellular)
1000 Talk Group ID's in 10 Lists of 10 per Bank - Let's you quickly select the talk groups you want to hear when you listen to trunked systems.
TrunkTracker III with Control-Channel Only scanning and I-Call monitoring
DCS/CTCSS Rapid Decode
SAME Weather Alert - Specific Area Message Encoding - During a NOAA Weather or Emergency Alert, a code for your specific location will alert you to severe conditions in your immediate area.
Conventional and Trunked Search Operations - Let's you find transmissions not listed in any book or anyone's web site.
Priority Scan
AC Adapters, DC Power Cable and Automotive Power Outlet Plug - More options for supplying power to your scanner at home or in your car.
Programmable Delay - When programmed on a channel, it allows time for a reply on the same channel before resuming to scan.
Programmable Search - Allows you to set the upper and lower limits of specific frequency range for easier searching.
Modulation Capability (AM/FM/NFM)
Frequency Steps (kHz) 5/6.25/12.5/25
200 Talk Group Skip Memories
100 Search Skip Memories

Uniden Bearcat BC898T Scanning Receiver (from Dave's Radio Page)
Uniden User's Manual (PDF)
- NOTE: Go about 1/2 way down the page. Some missing info may be found in the 895 and BCT8 manuals