Actions

Difference between revisions of "BCD325P2"

From The RadioReference Wiki

Line 153: Line 153:
 
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/BCD325P2 Uniden BCD325P2 Wiki Page]
 
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/BCD325P2 Uniden BCD325P2 Wiki Page]
 
**The required USB drivers can be found here  
 
**The required USB drivers can be found here  
 
+
;* [http://marksscanners.com/325/325.shtml Mark's Easier to Read BCD325P2 Manual]
 
; Wiki Articles
 
; Wiki Articles
 
* [[Programming Your Uniden Scanner]]
 
* [[Programming Your Uniden Scanner]]

Revision as of 14:55, 5 April 2016

Bearcat BCD325P2 digital Trunktracker V

The Uniden BCD325P2 is a APCO-25 Phase II capable handheld "Trunktracker V" scanner with Dynamic Memory Architecture. This scanner became available to the market in April, 2015. It is an upgrade and repackaging of the BCD396XT.


Specifications

Features

  • TrunkTracker V -- Includes APCO P25 Phase I and II, Motorola, EDACS, and LTR
  • 25,000 Channels
  • Close Call™ RF Capture
  • Temporary Lockout
  • Location-Based Scanning
  • Fire Tone-Out Alert
  • Band Scope
  • Rapid System/Channel Number Tagging
  • DCS/CTCSS Rapid Decoding
  • Audio AGC
  • S.A.M.E. Weather Alert
  • Location Alerts*
  • Crows-Flight Navigation*
  • Backlit LCD
  • Dynamic Memory
  • Custom Search
  • 16 Character Text Tagging
  • Narrowband Reception
  • Key-Safe Mode
  • IF Exchange
  • Preemptive Trunking Priority
  • 12 Service Searches: Public Safety, News, Ham Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, FM Broadcast and Special (Itinerant)
  • Multi-Site System Support
  • Channel Volume Offset
  • PC Programming and Control (with 3rd party software, not included)

In the Box

  • BCD325P2 Radio Scanner
  • Batteries (2 AA 2300mah)
  • Flexible antenna (BNC)
  • USB to USB Mini B cable(Programming/Charging)
  • Hand strap
  • Owner’s manual
  • Belt Clip (Already attached w 2 screws)

Frequency Coverage

  • 25.0000 - 512.0000 MHz
  • 758.0000 - 823.9875 MHz
  • 849.0125 - 868.9875 MHz
  • 894.0125 - 960.0000 MHz
  • 1240.0000 - 1300.0000 MHz

FM Bandwidths

  • NFM: ~7.5 kHz deviation
  • FM: ~15 kHz deviation
  • FMB: ~75 kHz deviation
  • WFM: >100 kHz deviation

Power Requirements

  • Power requirements: 2 AA batteries(2.05v or higher) or 5V DC ≥300mA or AC adapter 5v ≥300ma.

RR System Compatibility

This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:

  • System Voices:
    • Analog
    • Analog and APCO-25 Common Air Interface
    • Digital APCO-25 Common Air Interface Exclusive

Features

  • Supports Rebanded Systems
  • APCO25 Digital Audio decoding
  • NAC decoding
  • Support for P25 Conventional channels that include NAC and TGID user differentiation (P25 One-Frequency Trunk)
  • Adaptive Digital Threshold - Automatically sets the digital decode threshold for APCO 25 systems
  • TrunkTracker V with Motorola Control Channel Only trunking and I-Call monitoring
  • Multi-Site support
  • Display UID (Unit IDs) on trunking systems.
  • EDACS ESK support
  • Standard Bearcat Orange back-lit display
  • System / Channel Number Tagging - provides rapid access to a specific system or channel.
  • Control Channel Data Output – allows the analysis of control channel data without the need to perform invasive modifications to the scanner. Now supported in UniTrunker version 1.0.0.10 or newer.
  • Uniden Close Call, with Close Call Do Not Disturb, Close Call Priority (or Primary), and Close Call Temporary Store
  • GPS Support for location-based scanning, location alerts, and crows-flight navigation
  • [http://info.uniden.com/twiki/bin/view/UnidenMan4/LocationBasedScanning Independent GPS Control of Sites and Channel Groups
  • 100 Quick Keys
  • Supported step sizes: 5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz
    • Adjustable Band defaults
  • Individual channel volume offset
  • Intermediate Frequency Exchange - changes the IF used for a selected frequency to help avoid image and other mixer-product interference on a frequency.
  • Key Safe Mode - lets you hand the scanner to a novice user and prevent programming from being modified.
  • Private Systems - lets you flag a system so that it cannot be read out of the scanner or modified.
  • Band Scope - gives a graphic representation of signal activity.
  • Delay Channel adjustable to 0-2,5,10,30,
  • Negative Channel dropout delay (forced resume) adjustable to -2, -5, -10 seconds
  • DCS/CTCSS Rapid Decode
  • Temporary System, Site, Group, Channel, and Location Lockout
  • 500 (250 Temporary + 250 Permanent) Search Lockouts
  • Startup Configuration
  • Frequency/ID AutoStore - automatically store frequencies from a service or limit search into a conventional system or store talk group IDs into a trunked system
  • 16 character text tagging for each system, site, group, channel, talkgroup, search range, location, Tone-out, and SAME group
  • Analog and Digital AGC
  • Ability to flag a channel as Digital, Analog, or All
  • Quick Search
  • Search with Scan for Service and Custom Searches with assigned Quick Keys
  • 12 Service Searches - Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, FM Broadcast, Military Air, and Special (Itinerant)
  • Custom Search — lets you program up to 10 search ranges
  • 3 Quick-Access Search Keys
  • Fire Tone Out alert
  • Fire Tone Out Search - built-in frequency counter displays the received tones.
  • Channel Alert
  • Independent Alert Tone Volume – lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, and Close Call Alert.
  • Weather Alert Priority
  • SAME Weather Alert
  • Duplicate Channel Alert
  • Priority Scan with Priority Plus
  • Adjustable Priority check interval
  • Priority ID Scan on some trunked systems
  • Preemptive Priority on Motorola analog systems
  • Signal Strength display
  • LCD Backlight
  • Battery level display
  • Battery saver
  • Key Lock
  • Adjustable Hold (scan duration 0-255 sec) per system, site, custom or service search
  • Attenuation (for Strong signal -20db)
  • Upgradeable firmware
  • Repeater Reverse
  • Broadcast signal ignore while searching (TV and radio station frequencies, pagers, etc) with 10 custom bands
  • PC Programming and Control (No Uniden Software included or developed)
  • Wired Cloning (Will only Clone to another BCD325P2)
  • Antenna Connector: BNC adapter

Related Pages

External Links
Wiki Articles

Supporting Software

Message Boards / Groups

RadioReference
Yahoo! Groups

Return to Uniden Scanners