Actions

BCD436HP and BCD536HP Scanner FAQ

From The RadioReference Wiki

Revision as of 17:36, 28 February 2022 by Ka3jjz (talk | contribs)

Welcome to the BCD436HP and BCD536HP Scanner FAQ. This will cover the BCDx36HP Series 3 tier DMA scanners. Please feel free to add any commonly asked questions and answers related to these 2 scanners here. This page is devoted to firmware and software questions, along with available resources. Additional questions regarding installation, operations and modifications can be found on page 2 of this document. Uniden's Sentinel Software has its own special pages listed under Sentinel (Uniden software).


NOTE: We have separate FAQs for other Uniden products;

The Nuts and Bolts

  • If you're a newcomer, you've probably already discovered that there's a huge amount of terms that seem unfamiliar to you. Our Glossary has lots of these terms, along with definitions. Just click on the term you wish to view.
  • When looking at frequencies in our database, float your mouse over the column header, and you should get a balloon with a brief description of the terms and abbreviations that are used there.
  • The biggest hurdle for many is the concept of trunking. Our Trunking Basics article will get you started, as well as this PDF file written by UPMan. Note that you will need Adobe Acrobat or a compatible reader (such as Foxit) to read it.


Firmware

  • Where is the official BCD436HP Firmware page?
    • Go to this page on the Uniden TWiki
  • Where can I find the ProVoice or DMR upgrade for my BCD436HP?
  • Where is the official BCD536HP Firmware page?
    • Go to this page on the Uniden TWiki; f/w update can only be made through the front port or by dropping f/w bin file into Firmware Folder
  • Where can I find the ProVoice or DMR upgrade for my BCD536HP?
  • Where can I find information on the NXDN update for the 436 and 536?


Supporting Software & Utilities

Official Uniden Software

BCD536HP only (Note Abandoned)
  • Uniden's Siren app for WiFi Connectivity iOS or Android
  • RH-536HP_mkII was also Uniden published for use over Wi-Fi, Note: Never is/was intended as a finished product (for consumer use), allows limited remote control-ability through local Wi-fi, Serial or USB port or click here for direct download to begin. Audio is via a direct cable or Wi-Fi, Wi-Fi Audio has to use a third party application like VLC or Proscan to directly address scanner via rtsp://192.168.1.174/au:scanner.au , use your local scanners address to receive (("192.168.1.174" is what will need to be changed) 'rtsp:// . . . /au:scanner.au' will remain the same)).


Third Party Accessories

Third Party Supported Software & Utilities

  • FreeScan will NOT be modified to support the BCDx36HP Series scanners, per the programmer.
  • You must use Sentinel to load any firmware fixes. None of the applications below support this function

Additional Resources

Easier to Read Manuals
Other Links
Related Wiki Articles
Uniden TWiki Links
YouTube


Return to


Go to