Difference between revisions of "BCD996P2"
From The RadioReference Wiki
m (updated categories) |
|||
| Line 81: | Line 81: | ||
** [[EDACS Narrowband Networked]] | ** [[EDACS Narrowband Networked]] | ||
** [[EDACS SCAT]] | ** [[EDACS SCAT]] | ||
| − | ** [[ESK|EDACS ESK]] | + | ** [[ESK|EDACS ESK]] |
** [[LTR|LTR Standard]] | ** [[LTR|LTR Standard]] | ||
| − | ** [[APCO Project 25 | + | ** [[APCO Project 25]] Phases I and II |
| − | ** | + | ** [[EDACS Provoice]] (with firmware 1.07.06 or better) |
| + | ** Conventional Digital Mobile Radio ([[DMR]]) (with firmware 1.07.06 or better) | ||
| + | ** [[MOTOTRBO]] Capacity Plus Trunked Radio Systems (with firmware 1.07.06 or better) | ||
| + | ** [[MOTOTRBO]] Connect Plus Trunked Radio Systems (with firmware 1.07.06 or better) | ||
| + | ** [[MOTOTRBO]] Linked Capacity Plus Systems (with firmware 1.07.06 or better) | ||
| + | ** [[DMR]] Tier III Trunking (with firmware 1.07.06 or better) | ||
| + | |||
*System Voices: | *System Voices: | ||
| Line 90: | Line 96: | ||
** Analog and APCO-25 Common Air Interface | ** Analog and APCO-25 Common Air Interface | ||
** APCO-25 Common Air Interface Exclusive | ** APCO-25 Common Air Interface Exclusive | ||
| + | ** [[DMR]] | ||
| + | ** [[EDACS Provoice|ProVoice]] Exclusive | ||
| + | |||
==Related Pages== | ==Related Pages== | ||
| Line 113: | Line 122: | ||
[[Category:Uniden Scanners]] | [[Category:Uniden Scanners]] | ||
| − | [[Category:Digital Scanners | + | [[Category:Digital Scanners with DMR]] |
| − | [[Category:Digital Scanners | + | [[Category:Digital Scanners with MOTOTRBO]] |
[[Category:Digital Scanners without NXDN]] | [[Category:Digital Scanners without NXDN]] | ||
| − | [[Category:Digital Scanners | + | [[Category:Digital Scanners with ProVoice]] |
[[Category:Desktop Scanners]] | [[Category:Desktop Scanners]] | ||
[[Category:Mobile Scanners]] | [[Category:Mobile Scanners]] | ||
[[Category:Rebanding Supported Scanners]] | [[Category:Rebanding Supported Scanners]] | ||
[[Category:Radio Models]] | [[Category:Radio Models]] | ||
Revision as of 08:07, 20 December 2016
The Uniden BCD996P2 is a APCO-25 Phase II capable base/mobile TrunkTracker V scanner with Dynamic Memory Architecture. It is an upgrade to the BCD996XT, and direct sibling to the BCD325P2 released shortly after. This scanner became available to the market in March, 2015. The BCD996P2 has many features included in previous generations of "996"'s*, currently it's waiting on a firmware update to include Site specific P25 decode threshold settings that never showed itself in the XT model. It's overall redeeming qualities: inclusion of Phase 2 receiving capabilities and better ability to handle power disruptions, than the new SD card based top-of-the-line BCDx36HP series, allowing owners/operators seamless restoration of scanning after a power disruption, important for operators not familiar with scanner operations i.e. Tow Truck Drivers and other listeners/Responders.
- As noted in the Differences in 996XT to 996P2? Thread, the BCD996P2 differs from the BCD996t and BCD996XT in the following ways:
- Different face plate
- Digital Phase 2 capable APCO Project 25
- USB port
- Printed Manual
Contents
Specifications
Features
- TrunkTracker V -- Includes APCO P25 Phase I and II, Motorola, EDACS, and LTR
- 25,000 Channels
- Close Call™ RF Capture
- Temporary Lockout
- Location Based Scanning
- Fire Tone-Out Alert
- Band Scope
- Rapid System/Channel Number Tagging
- DCS/CTCSS Rapid Decoding
- Audio AGC
- S.A.M.E. Weather Alert
- Location Alerts*
- Crows-Flight Navigation*
- Backlit Keypad & LCD
- Dynamic Memory
- Custom Search
- 16 Character Text Tagging
- Narrowband Reception
- Key-Safe Mode
- IF Exchange
- Preemptive Trunking Priority
- 12 Service Searches: Public Safety, News, Ham Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, FM Broadcast and Special (Itinerant)
- Multi-Site System Support
- Channel Volume Offset
- PC Programming and Control (with 3rd party software, not included)
- DIN-E and ISO Vehicle Mountable
In the Box
- BCD996P2 Radio
- AC\DC power adapter
- Telescopic antenna
- USB cable (USB Mini-B)
- DC Wiring Harness
- Mounting hardware and owner’s manual
Frequency Coverage
- 25.0000 - 512.0000 MHz
- 758.0000 - 823.9875 MHz
- 849.0125 - 868.9875 MHz
- 894.0125 - 960.0000 MHz
- 1240.0000 - 1300.0000 MHz
FM Bandwidths
- NFM: ~7.5 kHz deviation
- FM: ~15 kHz deviation
- FMB: ~75 kHz deviation
- WFM: >100 kHz deviation
Power Requirements
- Power requirements: AC Adapter (13.8V DC 750mA Regulated) (AD-1009 or equivalent).
- DC:11V to 16.6V(Ext.DC Power Jack or DC 4 Pin Power Plug)
- Power plug: 5.5mm outer diameter, 2.1mm inner diameter; Radio Shack size code "M"
RR System Compatibility
This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:
- System Types:
- Motorola Type I
- Motorola Type II
- Motorola Type IIi Hybrid
- Motorola Type II Smartnet
- Motorola Type II SmartZone
- Motorola Type II SmartZone OmniLink
- Motorola Type II VOC
- EDACS Standard (Wide)
- EDACS Standard Networked
- EDACS Narrowband
- EDACS Narrowband Networked
- EDACS SCAT
- EDACS ESK
- LTR Standard
- APCO Project 25 Phases I and II
- EDACS Provoice (with firmware 1.07.06 or better)
- Conventional Digital Mobile Radio (DMR) (with firmware 1.07.06 or better)
- MOTOTRBO Capacity Plus Trunked Radio Systems (with firmware 1.07.06 or better)
- MOTOTRBO Connect Plus Trunked Radio Systems (with firmware 1.07.06 or better)
- MOTOTRBO Linked Capacity Plus Systems (with firmware 1.07.06 or better)
- DMR Tier III Trunking (with firmware 1.07.06 or better)
- System Voices:
Related Pages
- External Links
- Uniden BCD996P2 Wiki Page
- The required USB drivers can be found here
- Wiki Articles
Supporting Software
- See the Uniden DMA Software Support article for packages that support programming and virtual control
Message Boards / Groups
- RadioReference
- Yahoo! Groups
Return to Uniden Scanners