Actions

Difference between revisions of "BCD996T"

From The RadioReference Wiki

(185 intermediate revisions by 27 users not shown)
Line 1: Line 1:
[[image:Bcd996t 100505.gif|thumb|BCD996T (Preliminary) - Click image to view in full]]
+
[[image:Bcd996t 100505.gif|right|400px|BCD996T - Click image to view in full]]
== Overview ==
 
  
Will be Uniden's latest Base/Mobile Digital Trunktracker scanner with Dynamic Memory and GPS Support.
+
Uniden's Base/Mobile Digital Trunktracker scanner with [[Dynamic Memory Architecture]] and GPS Support. Discontinued.
  
Expected Ship Date is late Spring 2006, and will probably retail for close to $550.00
+
Started Shipping June 2006.
  
Newer photos of the BCD996T can be found [http://www.scancapecod.us/wiki/index.php/BCD996T_Photos%21 here], courtesy of Paul Opitz, Chris Gordon and the Scan Massachussetts wiki.
+
[http://www.monitoringtimes.com/html/mtfirstlook-bcd996t.pdf Uniden BCD-996T First look]
  
'''All information on this page is preliminary and subject to change. Nothing on this page should be construed as a warranty of performance for this or any Uniden product.'''
+
==General Specifications==
 +
===Power===
 +
* Voltage: 13.8 Volts d.c.
 +
* Current: less than 750mA (max. rating of included wall wart)
 +
* Power plug: 5.5mm outer diameter, 2.1mm inner diameter; Radio Shack size code "M"
  
== Feature Summary ==
+
===Limits===
* [[Rebanding]] Supported? <font color=green> YES </font>
+
* Channels: 6000 maximum
* Memory Architecture
+
* Systems: 500 maximum
** Dynamic allocation.
+
* Sites: 1000 maximum, 256 maximum per system
** Construction:
+
* Groups per system: 20 maximum
** 500 Systems, 6000 Channels*
+
* Talkgroups per trunked system: 250 maximum
*Creation of systems and channel groups use channel slots, so the actual total channel count will be less than 6000.
 
**Maximum Systems: 500
 
**Maximum Channel Groups per System: 20
 
**Maximum Channels in a Trunked System: 250
 
**Maximum Channels in a Conventional System: 1000
 
**Maximum Frequencies in a Trunked System: 1000 - #Channels used
 
**Maximum Sites per System: 256
 
**Maximum Sites Total: 1000
 
  
* Creation of Systems and Channel Groups use some channel slots, so the total number of channels could be less than 6000.
+
* Scan Rate: 100 channels per second (conventional mode)
* Search with Scan
+
* System Quick Key range: 0-99
* Temporary Lockout
+
* Group Quick Key range: 0-9
* 100 System/Site Quick Keys + 10 Group Quick Keys per System
+
* Custom Search Ranges: 10
* Startup Configuration – lets you set systems to be automatically locked or unlocked during power-up.
+
* Preprogrammed Service Search Bands: 13
* Single-Handed Function Operation
+
 
* Priority Scan
+
===Frequency Coverage===
* Priority Plus
+
* 25 - 512 MHz
* Channel Alert
+
* 764 - 776 MHz
* Dropout Delay
+
* 794 - 956 MHz
* Attenuator
+
* 1240 - 1300 MHz
* Repeater Reverse
+
 
 +
===Features===
 +
* Can be updated to support [[Rebanding]]? {{color|green|YES}}
 +
** See the [[Updating the Firmware in Uniden DMA Scanners]] article for the firmware link
 +
* [[Project_25|APCO25 Digital Audio]] decoding
 +
* Adaptive Digital Threshold - Automatically sets the digital decode threshold for APCO 25 systems
 +
* [[TrunkTracker IV]] with Motorola [[Control Channel Only]] trunking and [[I-Call]] monitoring
 +
* Multi-Site support
 +
* Trunking Activity Indicators
 +
* EDACS [[ESK]] support (requires firmware 3.0 or newer)
 +
* Multi-color display backlight
 
* Quick Recall – quickly navigates to a specific Channel by choosing the System, Group, and Channel.
 
* Quick Recall – quickly navigates to a specific Channel by choosing the System, Group, and Channel.
* Weather and SAME Alert
+
* [[Uniden Close Call]], with [[Uniden Close Call#Close Call Do Not Disturb|Close Call Do Not Disturb]], [[Uniden Close Call#Close Call Priority|Close Call Priority (or Primary)]], and [[Uniden Close Call#Close Call Temporary Store|Close Call Temporary Store]].
* 10 Custom Search Ranges
+
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/GPSMode GPS Support] for [[Uniden Scanner GPS Features|location-based scanning]], location alerts, and crows-flight navigation
* Service Search – Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, TV Broadcast, FM Broadcast, Special, Military Air
+
* 100 Quick Keys
* Tone Search – Rapidly searches for the CTCSS/DCS used during a transmission.
+
* Supported step sizes: 5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz
* Fire Tone-Out
+
* Adjustable (0-5 sec) scan delay
* Frequency Autostore
+
* Data Skip
* ID Autostore
+
* [[DCS]]/[[CTCSS]] [[Automatic_CTCSS_identification|Rapid Decode]]
 +
* Temporary System, Site, Group, Channel, and Location Lockout
 +
* 500 (250 Temporary + 250 Permanent) Search Lockouts
 +
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/StartupKeys Startup Configuration]
 +
* Frequency/ID AutoStore - automatically store frequencies from a service or limit search into a conventional system or store talk group IDs into a trunked system
 +
* 16 character text tagging for each system, site, group, channel, talkgroup, search range, location, Tone-out, and [[SAME]] group
 +
* Compatible with [[BC-RH96]] Remote Head
 +
* Analog and Digital [[AGC]]
 +
* Ability to flag a channel as Digital, Analog, or All
 
* Quick Search
 
* Quick Search
* “SOFT�? Search Keys – let you assign search ranges to front-panel keys.
+
* Search with Scan for Service and Custom Searches with assigned Quick Keys
* 500 (250 Temporary + 250 Permanent) Search Lockouts
+
* 13 Service Searches - Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, TV Broadcast, FM Broadcast, Military Air, and Special (Itinerant)
* Alpha Tagging – For System, Group, Channel, Talkgroup ID, Custom Search Range and SAME Group. The scanner allows up to 16 characters for each name.
+
* Custom Search — lets you program up to 10 search ranges
* Duplicate Input Alert
+
* 6 Quick-Access [http://info.uniden.com/twiki/bin/view/UnidenMan4/SearchKeys Search Keys]
* Data Skip
+
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/ToneOutMode Fire Tone Out] alert
* Broadcast Screen – sets the scanner to ignore hits on Pager, FM, UHF TV, VHF TV, NOAA WX and custom band frequencies.
+
** Also see the [[Fire Tone Out]] article 
* Trunk Tracking – supports the following systems:
+
* [[Channel Alert]]
** Motorola: Type I 800 / Type II 800, 900, UHF, VHF, P25
 
** EDACS: WIDE, NARROW, SCAT
 
** LTR
 
* APCO Project 25 Decoder – lets you listen to digitized voice data that is compliant with the APCO Project25 standard.
 
* APCO Auto Adjust Threshold
 
* Multi-Site Trunking – allows independent system sites to share common talk group channel lists.
 
* Control Channel Only mode
 
* Two-Color LCD and Keypad Backlight – select red or green backlighting.
 
 
* Independent Alert Tone Volume – lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, and Close Call Alert.
 
* Independent Alert Tone Volume – lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, and Close Call Alert.
* Key Lock
+
* Weather Alert Priority
* Close Call RF Capture
+
* [[SAME]] Weather Alert
* Close Call Do-Not-Disturb – sets Close Call RF Capture to operate only when no transmission is being received.
+
* Duplicate Channel Alert
* Close Call Temporary Store – automatically saves and scans the last 10 Close Call hits.
+
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/PriorityScan Priority Scan] with Priority Plus
* PC Control
+
** Also see the [[Priority Scan]] article
* Wired Cloning
+
* Signal Strength display
* On-Air Programming
+
* LCD and Keypad Backlight
* Scan Speed – 100 CH/Sec. in Scan Mode (max)
+
* Reversible Display - Lets you reverse the display to mount unit upside down (and hear the speaker from the top)
* Search Speed / Turbo Search – 100 Steps/Sec. in Search Mode (max) - except for 5 kHz step. 300 Steps/Sec. in Search Mode (max) - (Turbo Search) - for 5 kHz step
+
* Adjustable Hold (scan duration 0-255 sec) per system, custom or service search
 +
* Strong signal attenuation
 +
* Upgradeable firmware
 +
* [[Repeater Reverse]]
 +
* Broadcast signal ignore while searching (TV and radio station frequencies, pagers, etc) with 10 custom bands
 +
* PC Programming and Control
 +
* Record Out - you can connect an output jack to a VOX controlled recorder or PC sound input to record the received audio.  
 +
* Wired Cloning (Will only Clone to another BCD996T)
 +
* DIN-E and ISO Vehicle Mountable sleeve included
 +
* Antenna Connector: BNC
 
* Memory Back Up
 
* Memory Back Up
* Trunking Activity Indicators
+
* Physical Dimensions: Width 7.33    Height 2.21    Depth 5.94
* Audio AGC
 
* Location-Based Scanning – Each system can include latitude, longitude, and range information and can be automatically enabled/disabled when a GPS is connected and the unit is within the defined range of the system.
 
* Non-Radio Location-Based Features – the scanner can include location alerts (that sound alert tones when the unit approaches a defined latitude/longitude) and speed-trap alerts (that sound alert tones if the unit is traveling at > than a set speed limit while it is within a grid area).
 
* GPS Display Mode – displays location and travel information based on the GPS input.
 
 
 
Physical Dimentions:
 
Width 7.33    Height 2.21    Depth 5.94
 
 
 
== GPS Features ==
 
 
 
'''The scanner will not include a GPS Receiver, an add-on GPS receiver will be required.'''  Users will be able to define a LAT/LONG centerpoint for any system (conventional or trunked) and a range (in miles) that specifies the radius of a circle that specifies where to turn the system on/off.
 
  
With the release of the scanner, the radioreference.com database (RRDB) will have the ability to store the Lat/Long/Range settings for conventional subcategories and trunked system sites.
+
===RR System Compatibility===
 +
This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:
 +
* System Types:
 +
** [[Motorola Type I]]
 +
** [[Motorola Type II]]
 +
** [[Motorola Type IIi Hybrid]]
 +
** [[Motorola Type II Smartnet]]
 +
** [[Motorola Type II SmartZone]]
 +
** [[Motorola Type II SmartZone OmniLink]]
 +
** [[Motorola Type II VOC]]
 +
** [[EDACS Standard|EDACS Standard (Wide)]]
 +
** [[EDACS Networked|EDACS Standard Networked]]
 +
** [[EDACS Narrowband]]
 +
** [[EDACS Narrowband Networked]]
 +
** [[EDACS SCAT]] - '''(version 3.0 firmware or later required)'''
 +
** [[ESK|EDACS ESK]] (not [[ProVoice]])
 +
** [[LTR|LTR Standard]]
 +
** [[APCO Project 25|Project 25 Standard]]
  
== Press Release ==
 
'''Uniden Announces Industry’s First GPS-Enabled Scanner'''
 
  
New Mobile Model Features Close Call™ Technology and APCO 25 Capability
+
*System Voices:
In a Desktop Design
+
** Analog
 +
** Analog and APCO-25 Common Air Interface
 +
** APCO-25 Common Air Interface Exclusive
  
Fort Worth, Texas, September 1, 2005 – Uniden America Corporation, a leading manufacturer of wireless consumer electronics, today announced a new mobile digital scanner, the Bearcat BCD996T. This model introduces the first-ever GPS-enabled scanner, allowing the product to automatically select nearby radio systems for scanning. The BCD996T also offers APCO 25 digital capability, allowing consumers to monitor the activities and signals of city and government service departments, and features advanced scanner technology in an in-dash or mobile mount design.
+
== Advanced Features ==
 +
'''[[Uniden Multi-Site Trunking]] -''' allows independent system sites to share common talk group channel lists.
  
The GPS-enabled feature offered by the BCD996T provides automatic system selection, which permits the scanner to turn system reception on or off depending on the user’s location, and allows the user to define the scanner display to show location-based information.
+
'''[[Location Based Scanning]] -''' If you connect a GPS unit to the scanner it can automatically enable/disable systems based on the geographic information you provide.
 
 
In addition, when a GPS unit, not included with this scanner, is connected to the BCD996T, it will alert at areas of special interest, such as dangerous intersections, school zones, or general points of interest.
 
 
 
Featuring APCO 25 capability, Uniden’s BCD996T is poised to further enhance Uniden’s offerings to public safety and increase interoperability between agencies using different types of radio systems. Uniden’s BCD996T will not permit users to monitor sensitive, encrypted signals from national and local security services.
 
 
 
The Bearcat BCD996T also offers Close Call™ RF Capture Technology, Dynamic Memory Management, Fire Tone-Out, and Multi-site programming as well as 6,000 channels and a frequency range of 25 MHz to 1.3 GHz (excluding cellular and UHF TV frequencies). This new model is slated to hit retail shelves in spring 2006 and carries a MSRP of $849.99.
 
“The BCD996T, the first GPS-enabled model in the scanner industry, is another milestone in the geographic
 
 
 
 
 
== Advanced (and much requested) Features ==
 
 
 
<NOTE THAT THIS IS PRELIMINARY AND SUBJECT TO CHANGE>
 
 
 
=== Multi-Site Trunking ===
 
 
 
Some wide coverage systems use multiple system sites that are linked together to provide extended area coverage. Each site operates on its own set of frequencies, but share talk group channels with all other sites in the system.
 
 
 
Normally, a site will only carry traffic for talk groups that have at least one subscriber unit (mobile radio) affiliated with it.
 
 
 
With the initial implementation of dynamic memory, each site needed to be entered as its own system, and all talk group channels had to be duplicated. This resulted in more complexity in programming as well as more memory usage.
 
 
 
Multi-Site Trunking is available for Motorola and EDACS system. With this method, you define a system, one or more sites for the system, and then the channels for the system. All channels are shared among all sites.
 
 
 
Here’s an outline of a Multi-Site System:
 
 
 
    System
 
          System Attributes
 
          Site
 
              Frequencies
 
              Other Attributes
 
          Site
 
              Frequencies
 
              Other Attributes
 
          Channel Group
 
              Channel Group Attributes
 
              Channel
 
                    Channel Attributes
 
              Channel
 
                    Channel Attributes
 
          Channel Group
 
              Channel Group Attributes
 
              Channel
 
                    Channel Attributes
 
              Channel
 
                    Channel Attributes
 
 
 
The only System attribute is the system name. This tag is never displayed, but makes the system easy to find for programming updates.
 
 
 
Site attributes include:
 
* Site Quick Key: Equivalent to the System Quick Key; turns the site on/off for scanning.
 
* Site Name
 
* Site Location
 
 
 
=== Temporary Lockout ===
 
 
 
Pressing L/O one time while on a channel temporarily locks out that channel.
 
Pressing F+L/O one time while on a system temporarily locks out that system.
 
 
 
Pressing L/O or F+L/O two times results in a permanent lockout. Pressing L/O for more than 3 seconds unlocks all channels in the current system (or all search lockouts if in a search). F+L/O for more than 3 seconds unlocks all systems.
 
 
 
Temporary lockouts are removed when power is cycled.
 
 
 
=== Startup Configuration ===
 
  
 +
'''Startup Configuration -'''
 
Pressing a number button while powering on the scanner automatically unlocks all systems assigned to that startup key and automatically locks all systems assigned to a different startup key (unassigned systems are not affected).
 
Pressing a number button while powering on the scanner automatically unlocks all systems assigned to that startup key and automatically locks all systems assigned to a different startup key (unassigned systems are not affected).
  
=== Location-Based Scanning (GPS) ===
+
'''Temporary Lockout -'''
 
+
Makes it easy to temporarily lock out a system, channel, or frequency. The lockout is cleared when you turn power off.
If you connect a GPS unit to the scanner, it can automatically enable/disable systems based on the geographic information you provide:
 
* Latitude (center of the range)
 
* Longitude (center of the range)
 
* Range (radius of a circle around the Latitude/Longitude) which can be selected from .5/1/3/5/10/20/30/50 miles
 
 
 
Rather than center the lat/lon on the antenna site for the system and set the range to the receivable range for the system, it makes more sense to center these settings on the geopolitical center of the system, and bound the range to encircle that entity. That is, while I can technically hear the Arlington TRS from west Fort Worth, I don’t really want to. Instead, I’d set the lat/lon/range values to approximate a circle around the Arlington city limits so that I would not hear Arlington until I approached/entered Arlington.
 
 
 
Also, not all geopolitical areas are perfect circles. You can modify the shape of the system by entering multiple sites for the system (even though the system might have only one site) and use different location settings for each site. For example, stack two circles to make a tall, narrow scan area for the system.
 
 
 
=== Non-Radio Location-Based Features (GPS) ===
 
 
 
There are non-radio type systems that hold other location based information:
 
* Dangerous Xing: Stores location, range, direction of travel. If you are within range, traveling in the specified direction, you receive an alert.
 
* Dangerous Road: Stores location, range, speed. If you are traveling at a speed greater than the one specified, and are within the range of the specified location, you receive an alert.
 
* Points of Interest: Stores location and range. If you approach the specified location, you receive an alert.
 
 
 
In general, a location alert can have:
 
* Latitude
 
* Longitude
 
* Speed (optional)
 
* Alpha (optional)
 
* Alert Type and Level (optional)
 
* Vector (optional)
 
* Heading
 
 
 
Alerts are based on:
 
* Speed setting > 0 and no vector entered, non-directional speed alert
 
* Speed setting > 0 and a vector is entered, directional speed alert
 
* Speed = 0 and vector is entered, dangerous intersection alert
 
* Speed = 0 and no vector entered, point-of-interest alert
 
 
 
The user can quickly save a location by pressing GPS. Scanner prompts for the type of location to store (Speed, Intersection, or POI).
 
 
 
=== [[Uniden Close Call|Close Call]] Do-Not-Disturb ===
 
 
 
When set in this mode, the scanner will periodically make Close Call checks whenever the scanner is not receiving audio in another mode. This eliminates the annoying breaks in conversation while still allowing for the Close Call functionality.
 
  
+
'''Six-Level Backlighting -'''
 +
Lets you set the display/keypad backlight to any of three brightness levels (or off) and two colors (red or green). Also lets you connect to your vehicle’s dimmer circuit to dim the scanner’s display with the vehicle’s dimmer control.
  
 +
'''“Soft“ Search Keys -'''
 
Let you program the keypad’s secondary functions to turn on/off specified search ranges.
 
Let you program the keypad’s secondary functions to turn on/off specified search ranges.
  
=== Two-Color Backlighting ===
+
'''Single-Handed Function Operation -'''
 
 
Lets you choose either red or green backlighting for the display/keypad.
 
 
 
=== Single-Handed Function Operation ===
 
 
 
 
Tap Function to access F+ key presses. 5 seconds after your last key press, the scanner reverts to non F+ entry (or press Function again to revert sooner).
 
Tap Function to access F+ key presses. 5 seconds after your last key press, the scanner reverts to non F+ entry (or press Function again to revert sooner).
  
=== Close Call Temporary Store ===
+
==Reviews==
 
+
* [[Scan Cape Cod's Mini-Review]]
 
 
 
=== GPS Display Mode ===
 
 
 
Lets you display extended GPS information like:
 
* Distance to POI
 
* Heading to POI
 
* Time to POI
 
* Speed
 
* Position
 
* And so on
 
 
 
=== Dual Serial Ports ===
 
 
 
Front-set serial port using the same connector as BC246T/BCD396T/BR330T/SC230.
 
Rear DB9 Male connector (for convenient direct plug-in of GPS Serial cable).
 
  
Either port can be configured to be PC interface or GPS interface.
+
==Related Pages==
 +
; External Links
 +
* [http://new.marksscanners.com/996/996.shtml Easier to Read BCD996T/UBC996T Manual]
 +
* [http://www.uniden.info/download/ompdf/BCD996Tom.pdf BCD996T User Manual]
 +
* [http://info.uniden.com/twiki/bin/view/UnidenMan4/BCD996TFirmwareUpdate#Revised_Protocol Control Codes for BCD996T]
 +
* [http://www.scannermaster.com/USB_Cable_p/01-551038.htm Uniden USB-1 page on Scanner Master]
  
=== PC Programming and Control ===
 
  
Free UASD software (compatible with other versions of UASD):
+
; Wiki articles
 +
* [[Programming Your Uniden Scanner]]
 +
* [[BCD996T QandA]]
 +
* [[BCD996T Lat-Lon]]
 +
* [[media:Bc996discriminatortap.jpg|JPEG of discriminator tap point]]
 +
* [[Uniden scanner test modes]]
 +
* [[P25_audio_decode_level_adjustment]]
 +
* [http://www.scannewengland.net/wiki/index.php/Uniden_BCD996T_AGC_Tweak_Procedure BCD996T AGC Tweak Procedure]
 +
* Compare the BCD996T to other digital models
 +
** [[Digital Scanner Comparison Chart]]
 +
* Has your speaker audio gone dead after having something plugged into the speaker jack? The [[Uniden Headphone Jack Modification]] may help
  
* [http://www.uniden.com/rn_productsupport_downloads.cfm?product=BCD996T UASD Software and Firmware Updates]
+
==PC Programming and Control==
 +
* [http://www.butelsoftware.com BuTel Software products]
 +
** ARC996 Basic/Pro
 +
** ARC996 Pro is capable of recording audio
 +
** [http://www.butel.nl/BCD996T/ARC996.pdf ARC996 PDF brochure]
 +
** ScannerStation
 +
* [http://www.proscan.org ProScan Free 30-day fully functional trial, $ 50, Feature Rich]
 +
* Clone996 backup & restore utility (available from BCD996 or ARC996 Yahoo groups)
 +
* [[cat-streamer]] (Stream audio with site/group/channel tags)
  
Free Clone996 software will be available at [http://www.butelsoftware.com BuTel Software] website.
+
==Yahoo Groups and Message Boards==
 +
*{{Forum|uniden-forums|RadioReference Uniden}}
 +
* [http://groups.yahoo.com/group/ARC996_software/ ARC996 Yahoo group]
 +
* [http://groups.yahoo.com/group/BCD996T/ BCD996T Yahoo group]
  
[http://www.butelsoftware.com BuTel Software] is developing ARC996 Basic & ARC996 Pro software
+
==Talkgroup and Frequency display when scanning==
  
BuTel 'Scanner Over Ip' client/server software will also support BCD996T
+
Use display mode #2: Toggling the Display Mode
 +
To change the display so the channel and frequency or Talk Group ID appear
 +
instead of extended channel information, hold on any channel then press F + [0].
 +
The scanner displays Display Mode 2. To return to Mode 1, press F + [0]
 +
Mode1 indicates the channel data under the Channel Name.
 +
Mode2 indicates the frequencies under the Channel Name for Conventional
 +
systems or the TGID number for Trunked systems.
  
[http://groups.yahoo.com/group/BCD996T/ BCD996T Yahoo group]
+
==BCD996T Scanners for Sale==
 +
*[[BCD996T eBay Listings]]
  
[http://www.strongsignals.net/access/forums/viewforum.php?f=50&sid=a008fecb4f59406385d1ff0cbe328c9c Strong Signals BCD996T forum]
 
  
== Help Create Location Data ==
+
Return to [[Uniden Scanners]]
  
Want to help create the location data? Well, go to [[BCD996T_Lat-Lon]] and give us a hand. Everyone who contributes at least 25 site locations gets a preview copy of the BCD996T UASD software!
 
  
 
[[Category:Uniden Scanners]]
 
[[Category:Uniden Scanners]]
 +
[[Category:Desktop Scanners]]
 
[[Category:Mobile Scanners]]
 
[[Category:Mobile Scanners]]
[[Category:Trunking Scanners]]
+
[[Category:Digital Scanners without DMR]]
 +
[[Category:Digital Scanners without MOTOTRBO]]
 +
[[Category:Digital Scanners without NXDN]]
 +
[[Category:Digital Scanners without ProVoice]]
 +
[[Category:Rebanding Supported Scanners]]
 +
[[Category:Radio Models]]

Revision as of 11:46, 22 September 2019

BCD996T - Click image to view in full

Uniden's Base/Mobile Digital Trunktracker scanner with Dynamic Memory Architecture and GPS Support. Discontinued.

Started Shipping June 2006.

Uniden BCD-996T First look

General Specifications

Power

  • Voltage: 13.8 Volts d.c.
  • Current: less than 750mA (max. rating of included wall wart)
  • Power plug: 5.5mm outer diameter, 2.1mm inner diameter; Radio Shack size code "M"

Limits

  • Channels: 6000 maximum
  • Systems: 500 maximum
  • Sites: 1000 maximum, 256 maximum per system
  • Groups per system: 20 maximum
  • Talkgroups per trunked system: 250 maximum
  • Scan Rate: 100 channels per second (conventional mode)
  • System Quick Key range: 0-99
  • Group Quick Key range: 0-9
  • Custom Search Ranges: 10
  • Preprogrammed Service Search Bands: 13

Frequency Coverage

  • 25 - 512 MHz
  • 764 - 776 MHz
  • 794 - 956 MHz
  • 1240 - 1300 MHz

Features

  • Can be updated to support Rebanding? YES
  • APCO25 Digital Audio decoding
  • Adaptive Digital Threshold - Automatically sets the digital decode threshold for APCO 25 systems
  • TrunkTracker IV with Motorola Control Channel Only trunking and I-Call monitoring
  • Multi-Site support
  • Trunking Activity Indicators
  • EDACS ESK support (requires firmware 3.0 or newer)
  • Multi-color display backlight
  • Quick Recall – quickly navigates to a specific Channel by choosing the System, Group, and Channel.
  • Uniden Close Call, with Close Call Do Not Disturb, Close Call Priority (or Primary), and Close Call Temporary Store.
  • GPS Support for location-based scanning, location alerts, and crows-flight navigation
  • 100 Quick Keys
  • Supported step sizes: 5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz
  • Adjustable (0-5 sec) scan delay
  • Data Skip
  • DCS/CTCSS Rapid Decode
  • Temporary System, Site, Group, Channel, and Location Lockout
  • 500 (250 Temporary + 250 Permanent) Search Lockouts
  • Startup Configuration
  • Frequency/ID AutoStore - automatically store frequencies from a service or limit search into a conventional system or store talk group IDs into a trunked system
  • 16 character text tagging for each system, site, group, channel, talkgroup, search range, location, Tone-out, and SAME group
  • Compatible with BC-RH96 Remote Head
  • Analog and Digital AGC
  • Ability to flag a channel as Digital, Analog, or All
  • Quick Search
  • Search with Scan for Service and Custom Searches with assigned Quick Keys
  • 13 Service Searches - Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, TV Broadcast, FM Broadcast, Military Air, and Special (Itinerant)
  • Custom Search — lets you program up to 10 search ranges
  • 6 Quick-Access Search Keys
  • Fire Tone Out alert
  • Channel Alert
  • Independent Alert Tone Volume – lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, and Close Call Alert.
  • Weather Alert Priority
  • SAME Weather Alert
  • Duplicate Channel Alert
  • Priority Scan with Priority Plus
  • Signal Strength display
  • LCD and Keypad Backlight
  • Reversible Display - Lets you reverse the display to mount unit upside down (and hear the speaker from the top)
  • Adjustable Hold (scan duration 0-255 sec) per system, custom or service search
  • Strong signal attenuation
  • Upgradeable firmware
  • Repeater Reverse
  • Broadcast signal ignore while searching (TV and radio station frequencies, pagers, etc) with 10 custom bands
  • PC Programming and Control
  • Record Out - you can connect an output jack to a VOX controlled recorder or PC sound input to record the received audio.
  • Wired Cloning (Will only Clone to another BCD996T)
  • DIN-E and ISO Vehicle Mountable sleeve included
  • Antenna Connector: BNC
  • Memory Back Up
  • Physical Dimensions: Width 7.33 Height 2.21 Depth 5.94

RR System Compatibility

This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:


  • System Voices:
    • Analog
    • Analog and APCO-25 Common Air Interface
    • APCO-25 Common Air Interface Exclusive

Advanced Features

Uniden Multi-Site Trunking - allows independent system sites to share common talk group channel lists.

Location Based Scanning - If you connect a GPS unit to the scanner it can automatically enable/disable systems based on the geographic information you provide.

Startup Configuration - Pressing a number button while powering on the scanner automatically unlocks all systems assigned to that startup key and automatically locks all systems assigned to a different startup key (unassigned systems are not affected).

Temporary Lockout - Makes it easy to temporarily lock out a system, channel, or frequency. The lockout is cleared when you turn power off.

Six-Level Backlighting - Lets you set the display/keypad backlight to any of three brightness levels (or off) and two colors (red or green). Also lets you connect to your vehicle’s dimmer circuit to dim the scanner’s display with the vehicle’s dimmer control.

“Soft“ Search Keys - Let you program the keypad’s secondary functions to turn on/off specified search ranges.

Single-Handed Function Operation - Tap Function to access F+ key presses. 5 seconds after your last key press, the scanner reverts to non F+ entry (or press Function again to revert sooner).

Reviews

Related Pages

External Links


Wiki articles

PC Programming and Control

Yahoo Groups and Message Boards

Talkgroup and Frequency display when scanning

Use display mode #2: Toggling the Display Mode To change the display so the channel and frequency or Talk Group ID appear instead of extended channel information, hold on any channel then press F + [0]. The scanner displays Display Mode 2. To return to Mode 1, press F + [0] Mode1 indicates the channel data under the Channel Name. Mode2 indicates the frequencies under the Channel Name for Conventional systems or the TGID number for Trunked systems.

BCD996T Scanners for Sale


Return to Uniden Scanners