Actions

Difference between revisions of "BCD996T"

From The RadioReference Wiki
Line 76: Line 76:
 
* [[Search with Scan]] for Service and Custom Searches with assigned Quick Keys
 
* [[Search with Scan]] for Service and Custom Searches with assigned Quick Keys
 
* [[Startup Configuration]]
 
* [[Startup Configuration]]
−
* Temporary System, Site, Group, Channel, and Location Lockout  
+
* [[Temporary System, Site, Group, Channel, and Location Lockout]]
 
* Upgradeable firmware
 
* Upgradeable firmware
 
** Can be updated to support [[Rebanding]]? {{color|green|YES}}  
 
** Can be updated to support [[Rebanding]]? {{color|green|YES}}  

Revision as of 17:36, 6 May 2021

BCD996T - Click image to view in full

Uniden's Base/Mobile Digital Trunktracker scanner with Dynamic Memory Architecture and GPS Support. This is a TrunkTracker IV scanner with Motorola Control Channel Only trunking and I-Call monitoring

Started Shipping June 2006. Now discontinued

General Specifications

Power

  • Voltage: 13.8 Volts d.c.
  • Current: less than 750mA (max. rating of included wall wart)
  • Power plug: 5.5mm outer diameter, 2.1mm inner diameter; Radio Shack size code "M"

Physical and Tech Specifications

  • Channels: 6000 maximum
  • Systems: 500 maximum
  • Sites: 1000 maximum, 256 maximum per system
  • Groups per system: 20 maximum
  • Talkgroups per trunked system: 250 maximum
  • DIN-E and ISO Vehicle Mountable sleeve included
  • Antenna Connector: BNC
  • Memory Back Up
  • Physical Dimensions: Width 7.33 Height 2.21 Depth 5.94
  • Scan Rate: 100 channels per second (conventional mode)
  • System Quick Key range: 0-99
  • Group Quick Key range: 0-9
  • Custom Search — lets you program up to 10 search ranges
  • Preprogrammed Service Search Bands: 13
  • PC Programming and Control
  • Record Out - you can connect an output jack to a VOX controlled recorder or PC sound input to record the received audio.
  • Trunking Activity Indicators
  • Multi-color display backlight
  • GPS Support for Location Based Scanning, location alerts, and crows-flight navigation
  • 100 Quick Keys
  • Supported step sizes: 5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz
  • 13 Service Searches - Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, TV Broadcast, FM Broadcast, Military Air, and Special (Itinerant)
  • Adjustable (0-5 sec) scan delay
  • 500 (250 Temporary + 250 Permanent) Search Lockouts
  • 16 character text tagging for each system, site, group, channel, talkgroup, search range, location, Tone-out, and SAME group
  • Compatible with BC-RH96 Remote Head
  • 6 Quick-Access Search Keys
  • Signal Strength display
  • LCD and Keypad Backlight
  • Reversible Display - Lets you reverse the display to mount unit upside down (and hear the speaker from the top)
  • Adjustable Hold (scan duration 0-255 sec) per system, custom or service search
  • Strong signal attenuation
  • Six-Level Backlighting -Lets you set the display/keypad backlight to any of three brightness levels (or off) and two colors (red or green). Also lets you connect to your vehicle’s dimmer circuit to dim the scanner’s display with the vehicle’s dimmer control.
  • Soft Search Keys -Lets you program the keypad’s secondary functions to turn on/off specified search ranges.
  • Single-Handed Function Operation - Tap Function to access F+ key presses. 5 seconds after your last key press, the scanner reverts to non F+ entry (or press Function again to revert sooner).

Frequency Coverage

  • 25 - 512 MHz
  • 764 - 776 MHz
  • 794 - 956 MHz
  • 1240 - 1300 MHz

Features

RR System Compatibility

This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:


  • System Voices:
    • Analog
    • Analog and APCO-25 Common Air Interface
    • APCO-25 Common Air Interface Exclusive


Reviews


Related Pages

External Links
Wiki articles

PC Programming and Control

Message Boards/forums

Facebook
Groups.io

Talkgroup and Frequency display when scanning

Use display mode #2: Toggling the Display Mode To change the display so the channel and frequency or Talk Group ID appear instead of extended channel information, hold on any channel then press F + [0]. The scanner displays Display Mode 2. To return to Mode 1, press F + [0] Mode1 indicates the channel data under the Channel Name. Mode2 indicates the frequencies under the Channel Name for Conventional systems or the TGID number for Trunked systems.

BCD996T Scanners for Sale


Return to Uniden Scanners

Retrieved from "https://wiki.radioreference.com/index.php?title=BCD996T&oldid=285222"