From The RadioReference Wiki

Revision as of 06:07, 4 October 2005 by Blantonl (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Feature Summary

  • Memory Architecture
Dynamic allocation.
400 Systems, 6000 Channels* 
Maximum Systems: 400
Maximum Channel Groups per System: 20
Maximum Channels in a Trunked System: 200
Maximum Channels in a Conventional System: Limits of memory
  • Creation of Systems and Channel Groups use some channel slots, so the total number of channels could be less than 6000.
  • Search with Scan
  • Temporary Lockout
  • 99 System Quick Keys + 10 Group Quick Keys per System
  • Startup Configuration – lets you set systems to be automatically locked or unlocked during power-up.
  • Single-Handed Function Operation
  • Priority Scan
  • Priority Plus
  • Channel Alert
  • Alert Plus – keeps the scanner silent except during alert events (channel with programmed alert, weather alert, location alert, etc).
  • Dropout Delay
  • Attenuator
  • Repeater Reverse
  • Quick Recall – quickly navigates to a specific Channel by choosing the System, Group, and Channel.
  • Weather and SAME Alert
  • 10 Custom Search Ranges
  • Service Search – Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, TV Broadcast, FM Broadcast, Special, Military Air
  • Tone Search – Rapidly searches for the CTCSS/DCS used during a transmission.
  • Fire Tone-Out
  • Frequency Autostore
  • ID Autostore
  • Quick Search

-panel keys.

  • 200 Search Lockouts
  • Alpha Tagging – For System, Group, Channel, Talkgroup ID, Custom Search Range and SAME Group. The scanner allows up to 16 characters for each name.
  • Duplicate Input Alert
  • Data Skip
  • Broadcast Screen – sets the scanner to ignore hits on Pager, FM, UHF TV, VHF TV, NOAA WX and custom band frequencies.
  • Trunk Tracking – supports the following systems:
  • Motorola: Type I 800 / Type II 800, 900, UHF, VHF, P25
  • LTR
  • APCO Project 25 Decoder – lets you listen to digitalized voice data that is compliant with the APCO Project25 standard.
  • APCO Auto Adjust Threshold
  • Multi-Site Trunking – allows independent system sites to share common talk group channel lists.
  • Control Channel Only mode
  • Battery Save
  • Two-Color LCD and Keypad Backlight – select red or green backlighting.
  • Independent Alert Tone Volume – lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, Close Call Alert and Battery Low Alert.
  • Key Lock
  • Close Call RF Capture
  • Close Call Do-Not-Disturb – sets Close Call RF Capture to operate only when no transmission is being received.
  • Close Call Temporary Store – automatically saves and scans the last 10 Close Call hits.
  • PC Control
  • Wired Cloning
  • On-Air Programming
  • Scan Speed – 100 CH/Sec. in Scan Mode (max)
  • Search Speed / Turbo Search – 100 Steps/Sec. in Search Mode (max) - except for 5 kHz step. 300 Steps/Sec. in Search Mode (max) - (Turbo Search) - for 5 kHz step
  • Memory Back Up
  • Trunking Activity Indicators
  • Audio AGC
  • Location-Based Scanning – Each system can include latitude, longitude, and range information and can be automatically enabled/disabled when a GPS is connected and the unit is within the defined range of the system.
  • Non-Radio Location-Based Features – the scanner can include location alerts (that sound alert tones when the unit approaches a defined latitude/longitude) and speed-trap alerts (that sound alert tones if the unit is traveling at > than a set speed limit while it is within a grid area).
  • GPS Display Mode – displays location and travel information based on the GPS input.