BCD996T

BCD996T

Feature Summary

• Memory Architecture

Dynamic allocation.
Construction:	
400 Systems, 6000 Channels* 

Maximum Systems: 400
Maximum Channel Groups per System: 20
Maximum Channels in a Trunked System: 200
Maximum Channels in a Conventional System: Limits of memory

• Creation of Systems and Channel Groups use some channel slots, so the total number of channels could be less than 6000.
• Search with Scan
• Temporary Lockout
• 99 System Quick Keys + 10 Group Quick Keys per System
• Startup Configuration – lets you set systems to be automatically locked or unlocked during power-up.
• Single-Handed Function Operation
• Priority Scan
• Priority Plus
• Channel Alert
• Alert Plus – keeps the scanner silent except during alert events (channel with programmed alert, weather alert, location alert, etc).
• Dropout Delay
• Attenuator
• Repeater Reverse
• Quick Recall – quickly navigates to a specific Channel by choosing the System, Group, and Channel.
• Weather and SAME Alert
• 10 Custom Search Ranges
• Service Search – Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, TV Broadcast, FM Broadcast, Special, Military Air
• Tone Search – Rapidly searches for the CTCSS/DCS used during a transmission.
• Fire Tone-Out
• Frequency Autostore
• ID Autostore
• Quick Search

-panel keys.

• 200 Search Lockouts
• Alpha Tagging – For System, Group, Channel, Talkgroup ID, Custom Search Range and SAME Group. The scanner allows up to 16 characters for each name.
• Duplicate Input Alert
• Data Skip
• Broadcast Screen – sets the scanner to ignore hits on Pager, FM, UHF TV, VHF TV, NOAA WX and custom band frequencies.
• Trunk Tracking – supports the following systems:
• Motorola: Type I 800 / Type II 800, 900, UHF, VHF, P25
• EDACS: WIDE, NARROW, SCAT
• LTR

• APCO Project 25 Decoder – lets you listen to digitalized voice data that is compliant with the APCO Project25 standard.
• APCO Auto Adjust Threshold
• Multi-Site Trunking – allows independent system sites to share common talk group channel lists.
• Control Channel Only mode
• Battery Save
• Two-Color LCD and Keypad Backlight – select red or green backlighting.
• Independent Alert Tone Volume – lets you set the volume level of the following tones: Key Beep, Emergency Alert, Channel Alert, Close Call Alert and Battery Low Alert.
• Key Lock
• Close Call RF Capture
• Close Call Do-Not-Disturb – sets Close Call RF Capture to operate only when no transmission is being received.
• Close Call Temporary Store – automatically saves and scans the last 10 Close Call hits.
• PC Control
• Wired Cloning
• On-Air Programming
• Scan Speed – 100 CH/Sec. in Scan Mode (max)
• Search Speed / Turbo Search – 100 Steps/Sec. in Search Mode (max) - except for 5 kHz step. 300 Steps/Sec. in Search Mode (max) - (Turbo Search) - for 5 kHz step
• Memory Back Up
• Trunking Activity Indicators
• Audio AGC
• Location-Based Scanning – Each system can include latitude, longitude, and range information and can be automatically enabled/disabled when a GPS is connected and the unit is within the defined range of the system.
• Non-Radio Location-Based Features – the scanner can include location alerts (that sound alert tones when the unit approaches a defined latitude/longitude) and speed-trap alerts (that sound alert tones if the unit is traveling at > than a set speed limit while it is within a grid area).
• GPS Display Mode – displays location and travel information based on the GPS input.