Actions

Difference between revisions of "Battery Saver"

From The RadioReference Wiki

Line 1: Line 1:
 
Available in: [[SC230]], [[BC246T]], [[BR330T]] [[BCD396T]] [[BCD396XT]] [[BC346XT]]
 
Available in: [[SC230]], [[BC246T]], [[BR330T]] [[BCD396T]] [[BCD396XT]] [[BC346XT]]
  
Conventional Scanners:  [[BC125AT]], [[BC75XLT]]
+
Conventional Scanners:  [[BC125AT]], [[BC75XLT]] [[SR30C]]
 
------------------------------------------
 
------------------------------------------
 
==SC230, BC246T, BR330T, BCD396T==
 
==SC230, BC246T, BR330T, BCD396T==

Revision as of 14:34, 3 May 2021

Available in: SC230, BC246T, BR330T BCD396T BCD396XT BC346XT

Conventional Scanners: BC125AT, BC75XLT SR30C


SC230, BC246T, BR330T, BCD396T

To Access:

  • Press Menu. Scroll to the settings and options below (in Blue) and press E/Yes.
  • Press Scan/Srch to return to scanning when done with editing.

This setting turns the battery saver on or off. The scanner goes into low-power mode when you monitor a conventional channel that has no activity.

  • Press Menu. Scroll to 'Set Battery Save' and press E/Yes.
  • Scroll to On or Off and press E/Yes.
  • Press Scan to exit.


BCD396XT, BC346XT

To Access: press Menu. Scroll to 'Settings' and press E/yes.

These settings allow you to turn the battery save option on or off and to set the battery charge time. The scanner turns off power for 1 second and turns it on for 300 ms when you monitor a channel/frequency that has no activity for more than a minute. Note: No Icon will appear in the display to tell you if the battery save feature is on or off.

  • Scroll to 'Set Battery Save' and press E/yes.
  • Scroll to On or Off and press E/yes to save and exit.
  • Scroll to 'Set Charge Time' and press E/yes.
  • Enter 1-16 (hours) and press E/yes to save and exit.
  • Press Menu to return.

Credit Easier to Read manual