Actions

Battery Saver

From The RadioReference Wiki

Revision as of 13:19, 3 May 2021 by Ka3jjz (talk | contribs)

Available in: SC230, BC246T, BR330T BCD396T BCD396XT BC346XT


SC230, BC246T, BR330T, BCD396T

To Access:

  • Press Menu. Scroll to the settings and options below (in Blue) and press E/Yes.
  • Press Scan/Srch to return to scanning when done with editing.

This setting turns the battery saver on or off. The scanner goes into low-power mode when you monitor a conventional channel that has no activity.

  • Press Menu. Scroll to 'Set Battery Save' and press E/Yes.
  • Scroll to On or Off and press E/Yes.
  • Press Scan to exit.


BCD396XT, BC346XT

To Access: press Menu. Scroll to 'Settings' and press E/yes.

These settings allow you to turn the battery save option on or off and to set the battery charge time. The scanner turns off power for 1 second and turns it on for 300 ms when you monitor a channel/frequency that has no activity for more than a minute. Note: No Icon will appear in the display to tell you if the battery save feature is on or off.

  • Scroll to 'Set Battery Save' and press E/yes.
  • Scroll to On or Off and press E/yes to save and exit.
  • Scroll to 'Set Charge Time' and press E/yes.
  • Enter 1-16 (hours) and press E/yes to save and exit.
  • Press Menu to return.

Credit Easier to Read manual