Actions

Broadcast Screen

From The RadioReference Wiki

Revision as of 14:32, 9 May 2021 by Ka3jjz (talk | contribs)

Applies to: BR330T BCD396T BCD396XT BC346XT BCD436HP BCD325P2 SDS100 BCD996T BCT15 BCD996XT BCT15X BCD996P2 BCD536HP SDS200

European: UBC800XLT


To Access: press Menu. Scroll to 'Srch/CloCall Opt' and press E/yes. Scroll to the options below and press E/yes. Press Scan/Srch to return to scanning when done with editing.

This setting determines whether the scanner automatically ignores transmissions that are on common broadcasts, paging systems, and other annoyance radio sources during Custom Search, Service Search, or Close Call Search. Note: Broadcast screen is not effective during some service searches.

  • Scroll to 'Broadcast Screen' and press E/yes.
  • Scroll to 1 of 4 options and press E/yes. (not BCD436HP)
  • Set All Bands On - turns on broadcast screen on for all bands. Press Menu to return. (not BCD436HP)
  • Set All Bands Off - turns off broadcast screen off for all bands. Press Menu to return. (not BCD436HP)
  • Set Each Band - then scroll to each band and press E/yes to turn off or on. Press Menu to return.
    • Pager - the scanner skips known paging system frequencies.
    • AM - the scanner skips known AM frequencies.
    • FM - the scanner skips known FM frequencies.
    • UHF TV - the scanner skips known UHF TV frequencies.
    • VHF TV - the scanner skips known VHF TV frequencies.
    • NOAA WX - the scanner skips known NOAA weather frequencies.
    • Band 1-10 - the scanner skips known frequencies for custom broadcast ranges.
  • Program Band - then scroll to the custom band (1-10) and press E/yes.
  • At 'Set Lower Limit' enter the lower limit of the frequency range and press E/yes.
  • At 'Set Upper Limit' enter the upper limit of the frequency range and press E/yes.
  • Scroll to the next band and repeat. Press Menu twice to return.



Credit Easier to Read manuals