Difference between revisions of "Broadcastify-Calls-Trunk-Recorder"
From The RadioReference Wiki
| Line 1: | Line 1: | ||
| + | === Install the Required Prerequisites === | ||
| + | * libssl-dev | ||
| + | * libcurl4-openssl-dev | ||
| + | * fdkaac | ||
| + | * sox | ||
| + | sudo apt-get install libssl-dev libcurl4-openssl-dev fdkaac sox | ||
| + | |||
=== Download and Build Trunk Recorder === | === Download and Build Trunk Recorder === | ||
| Line 62: | Line 69: | ||
"callTimeout": 0.75 | "callTimeout": 0.75 | ||
} | } | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 23:26, 26 April 2020
Contents
Install the Required Prerequisites
- libssl-dev
- libcurl4-openssl-dev
- fdkaac
- sox
sudo apt-get install libssl-dev libcurl4-openssl-dev fdkaac sox
Download and Build Trunk Recorder
You need to download and build the latest version of Trunk Recorder
Build instructions are here:
Make sure you have ffmpeg compiled and built to support AAC audio encoding. See at the bottom of the page for details
Apply for API Key and System ID
You will need an API Key and System ID assigned by the Broadcastify administrator before you can get started.
To get a System ID and API Key issued, send an email to support@radioreference.com with the following info:
- Your RadioReference/Broadcastify Username
- Trunked or Conventional System(s) you wish to send to us
- Trunked Site Name (in the RRDB) or Frequencies List to send to us
- County where your ingest system resides
Configure Trunk Recorder
There are 3 configuration options
broadcastifyApiKey : specified for each system entry in your trunk-recorder config
this is the API Key issued to you by the administrator
broadcastifySystemId : specified for each system entry in your trunk-recorder config
this is the unique system identifier issued to you by the administrator
broadcastifyCallsServer : specified SYSTEMWIDE in your trunk-recorder config
should always be set to: "https://api.broadcastify.com/call-upload"
Example Trunk Recorder configuration
- API Key Example: "9c3e3b1d-324f-11aa-bd8b-0ec68ab9ccec"
- System ID Example: "91"
{
"sources": [{
"center": 853000000.0,
"rate": 2048000,
"ppm": 69.0,
"gain": 35.0,
"digitalLevels": 3,
"digitalRecorders": 4,
"driver": "osmosdr",
"device": "rtl=02,buflen=65536",
"modulation": "fsk4"
}],
"systems": [{
"control_channels": [851325000, 851825000],
"type": "p25",
"shortName": "mySystemName",
"broadcastifyApiKey": "9c3e3b1d-324f-11aa-bd8b-0ec68ab9ccec",
"broadcastifySystemId": "91",
"audioArchive": false
}],
"broadcastifyCallsServer": "https://api.broadcastify.com/call-upload",
"controlWarnRate": 5,
"callTimeout": 0.75
}