Actions

Difference between revisions of "Broadcastify/RTLSDR-Airband"

From The RadioReference Wiki

Line 6: Line 6:
  
 
=== Sample Config Files ===
 
=== Sample Config Files ===
 +
<nowiki>
  
 
# Sample file of "rtl_airband.conf" custom for BroadCastify.com server streaming
 
# Sample file of "rtl_airband.conf" custom for BroadCastify.com server streaming
Line 62: Line 63:
 
  }
 
  }
 
);
 
);
 +
</nowiki>

Revision as of 09:29, 8 January 2020

RTLSDR-Airband receives analog radio voice channels and produces audio streams which can be routed to various outputs.

Download: https://github.com/szpajder/RTLSDR-Airband

Broadcastify Fully Supports RTLSDR-Airband

Sample Config Files

# Sample file of "rtl_airband.conf" custom for BroadCastify.com server streaming # index = 0 => First dongle # index = 1 => Second dongle devices: ({ type = "rtlsdr"; index = 0; gain = 28; correction = 0; mode = "scan"; channels: ( { # squelch = 30; # Uncomment to set squelch manually freqs = ( 118200000, 119450000, 121900000, 124200000 ); # MODIFY_YOUR_AIRPORT_AIRBAND_FREQUENCY labels = ( "Tower", "S-Approach", "Ground", "N-Approach" ); # MODIFY_YOUR_AIRPORT_AIRBAND_FREQUENCY_NAME_LABELS outputs: ( # For local IceCast server { type = "icecast"; server = "127.0.0.1"; port = 8000; mountpoint = "LOCAL"; name = "Airport_ICAO"; genre = "ATC"; username = "source"; password = "hackme"; send_scan_freq_tags = true; description = "LOCAL IceCast Server"; }, # For remote BroadCastify server { type = "icecast"; server = "audioX.radioreference.com"; # FROM_YOUR_RR_FEED_PROVIDER_PAGE port = 80; # PORT_OF_RR_FEED_PROVIDER_ICECAST_SERVER_USUALLY_8000 mountpoint = "XXXXXXXX"; # MOUNT_POINT_FROM_YOUR_RR_FEED_PROVIDER_PAGE name = "XXXXXXXX"; # FEED_NAME_THAT_RR_GAVE_YOU_WHEN_YOU_APPLIED genre = "ATC"; username = "source"; password = "XXXXXXXX"; # PASSWD_FROM_YOUR_RR_FEED_PROVIDER_PAGE send_scan_freq_tags = true; description = "XXXXXXXX"; # DESCRIPTION_ASSIGNED_FROM_YOUR_RR_FEED_APPLICATION } # If you need more outputs, put here # Make sure you remove the comma at the end of the profile segment template e.g. "}," to "}" else you get and error ! ); } ); } );