Actions

Difference between revisions of "Broadcastify/RTLSDR-Airband"

From The RadioReference Wiki

Line 54: Line 54:
 
         }
 
         }
 
 
# If you need more outputs, put here
+
# If you need more outputs, put here ...
 +
 
 
# Make sure you remove the comma at the end of the profile segment template e.g. "}," to "}" else you get and error !
 
# Make sure you remove the comma at the end of the profile segment template e.g. "}," to "}" else you get and error !
  

Revision as of 08:34, 8 January 2020

RTLSDR-Airband receives analog radio voice channels and produces audio streams which can be routed to various outputs.

Download: https://github.com/szpajder/RTLSDR-Airband

Broadcastify Fully Supports RTLSDR-Airband

Sample Config Files

  1. Sample file of "rtl_airband.conf" custom for BroadCastify.com server streaming
  1. index = 0 => First dongle
  2. index = 1 => Second dongle

devices: ({

 type = "rtlsdr";
 index = 0;
 gain = 28;
 correction = 0;
 mode = "scan";
 channels:
 (
   {
  1. squelch = 30; # Uncomment to set squelch manually
     freqs = ( 118200000, 119450000, 121900000, 124200000 ); # MODIFY_YOUR_AIRPORT_AIRBAND_FREQUENCY
     labels = ( "Tower", "S-Approach", "Ground", "N-Approach" ); # MODIFY_YOUR_AIRPORT_AIRBAND_FREQUENCY_NAME_LABELS
     outputs: (

# For local IceCast server

       {
         type = "icecast";
         server = "127.0.0.1";
         port = 8000;
         mountpoint = "LOCAL";
         name = "Airport_ICAO";
         genre = "ATC";
         username = "source";
         password = "hackme";
         send_scan_freq_tags = true;

description = "LOCAL IceCast Server";

       },

# For remote BroadCastify server

       {
         type = "icecast";
         server = "audioX.radioreference.com"; # FROM_YOUR_RR_FEED_PROVIDER_PAGE
         port = 80; # PORT_OF_RR_FEED_PROVIDER_ICECAST_SERVER_USUALLY_8000
         mountpoint = "XXXXXXXX"; # MOUNT_POINT_FROM_YOUR_RR_FEED_PROVIDER_PAGE
         name = "XXXXXXXX"; # FEED_NAME_THAT_RR_GAVE_YOU_WHEN_YOU_APPLIED

genre = "ATC";

         username = "source";
         password = "XXXXXXXX"; # PASSWD_FROM_YOUR_RR_FEED_PROVIDER_PAGE
         send_scan_freq_tags = true;

description = "XXXXXXXX"; # DESCRIPTION_ASSIGNED_FROM_YOUR_RR_FEED_APPLICATION

       }

# If you need more outputs, put here ...

# Make sure you remove the comma at the end of the profile segment template e.g. "}," to "}" else you get and error !

     );
   }
 );
}

);