Actions

Category

Difference between revisions of "Analog Trunktrackers"

From The RadioReference Wiki

(fix upgrade notes on RS models)
(add cat instruction line)
Line 9: Line 9:
  
 
* Radio Shack
 
* Radio Shack
** No firm information is currently available on anything except the PRO-528. It is possible that the Pro-97 and 2055 will need a board swap to support rebanding. The original Pro-92 may be supported; however, the Pro-92A and Pro-92B may not. RS has stated that the PRO-528 can be upgraded by the user
+
** No firm information is currently available on anything except the PRO-528. It is possible that the Pro-97 and 2055 will need a board swap to support rebanding. The original Pro-92 may be supported; however, the Pro-92A and Pro-92B may not. RS has stated that the PRO-528 can be upgraded by the user<br>
 +
 
 +
When adding a new article for this topic, '''please CATEGORIZE these pages by adding <nowiki>[[Category:Analog Trunktrackers]]</nowiki> as the last line'''

Revision as of 10:40, 10 September 2007

This category page will be used to capture those trunktrackers that will trunk only analog systems.Digital trunking with these scanners is not possible due to firmware and design differences.

The following list includes scanners that are not anticipated to be supported when Rebanding takes place. Please see the linked article for more information.

  • Uniden Scanners
    • BC245XLT
    • BC895XLT
    • BC780XLT
  • Radio Shack
    • No firm information is currently available on anything except the PRO-528. It is possible that the Pro-97 and 2055 will need a board swap to support rebanding. The original Pro-92 may be supported; however, the Pro-92A and Pro-92B may not. RS has stated that the PRO-528 can be upgraded by the user

When adding a new article for this topic, please CATEGORIZE these pages by adding [[Category:Analog Trunktrackers]] as the last line

Pages in category "Analog Trunktrackers"

The following 82 pages are in this category, out of 82 total.