Actions

Channel Alert

From The RadioReference Wiki

Revision as of 18:39, 8 May 2021 by Ka3jjz (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Applies to: SC230, BC246T BCD396XT BC346XT HomePatrol-2 HomePatrol-1


SC230, BC246T

To Access:

  • Press Menu. At 'Program System' press E/Yes.
  • At 'Select System' scroll to the system that contains the channel and press E/Yes.
  • Scroll to 'Edit Group/Car' and press E/Yes.
  • At 'Select Group/Car' scroll to the group/car that has the channel you want to edit and press E/Yes.
  • Scroll to 'Edit Channel' press E/Yes.
  • At 'Select Channel' scroll to the channel you want to edit and press E/Yes.
  • Or, while scanning, Press Hold to hold on any channel.
  • Press and hold Func then press 7/Rcl.
  • At 'Select System' scroll to system that contains the channel and press E/Yes.
  • At 'Select Group/Car' scroll to the group/car that contains the channel and press E/Yes.
  • At 'Select Channel' scroll to the channel and press E/Yes twice.
  • You can also edit any displayed channel in scan mode by pressing E/Yes.


The feature where an alert (audible or otherwise) is provided when a transmission is heard on a designated channel.

Credit: Easier to Read manuals for the SC230, BC246