Actions

Difference between revisions of "Control Channel Data Output"

From The RadioReference Wiki

m
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
Available in: [[BC346XT]], [[BCD396XT]], [[BCT15X]], [[BCD996XT]], [[HomePatrol-1]], [[HomePatrol-2]], [[BCD996P2]], [[BCD325P2]]
+
Applies to: [[BC346XT]], [[BCD396XT]], [[BCT15X]], [[BCD996XT]], [[HomePatrol-1]], [[HomePatrol-2]], [[BCD996P2]], [[BCD325P2]]
  
 
Access:  
 
Access:  
Line 9: Line 9:
  
 
See our [[Trunked Radio Decoders]] article for links to various decoders.
 
See our [[Trunked Radio Decoders]] article for links to various decoders.
 +
 +
See our {{Forum|voice-control-channel-decoding-software.26|Voice Control Channel Decoding Software}} for support with many of these decoders
  
 
'''CAUTION:''' This function will prevent the scanner from connecting to any control programs such as Butel, ProScan, etc. Make sure this function
 
'''CAUTION:''' This function will prevent the scanner from connecting to any control programs such as Butel, ProScan, etc. Make sure this function

Latest revision as of 05:30, 3 July 2021

Applies to: BC346XT, BCD396XT, BCT15X, BCD996XT, HomePatrol-1, HomePatrol-2, BCD996P2, BCD325P2

Access:

  • XT Models: Settings > Set C - Ch output.
  • P2 Models: Same as XT Models
  • HomePatrol 1 and 2: Extreme update required See the Raw Data Output section in the Easier to Read guide.

Control Channel Data Output allows the analysis of control channel data without the need to perform invasive modifications to the scanner

See our Trunked Radio Decoders article for links to various decoders.

See our Voice Control Channel Decoding Software Forum for support with many of these decoders

CAUTION: This function will prevent the scanner from connecting to any control programs such as Butel, ProScan, etc. Make sure this function is off before using these programs or the connection will fail.