Actions

Control Channel Data Output

From The RadioReference Wiki

Revision as of 13:04, 29 April 2021 by Ka3jjz (talk | contribs)

Applies to: BC346XT, BCD396XT, BCT15X, BCD996XT, HomePatrol-1, HomePatrol-2, BCD996P2, BCD325P2

Access:

  • XT Models: Settings > Set C - Ch output.
  • P2 Models: Same as XT Models
  • HomePatrol 1 and 2: Extreme update required See the Raw Data Output section in the Easier to Read guide.

Control Channel Data Output allows the analysis of control channel data without the need to perform invasive modifications to the scanner

See our Trunked Radio Decoders article for links to various decoders.

CAUTION: This function will prevent the scanner from connecting to any control programs such as Butel, ProScan, etc. Make sure this function is off before using these programs or the connection will fail.