Actions

DIY Antenna Mounting Bracket

From The RadioReference Wiki

Revision as of 12:32, 31 March 2016 by QDP2012 (talk | contribs) (updated categories)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This is a very easy project to add more antennas on masts etc. Get yourself some 1/4" thick aluminum about 8"X8" from your local metal supplier or similar hardware stores, those screws are not needed!.

Aluminum.jpg


You will also need four 2 1/4" muffler clamps.

Mufflerclamp.jpg

You can buy smaller if you prefer but I would rather go a little bigger on the clamps so you can fit up to a 2" metal or aluminum mast if you chose.

More info to come


Take care Tonsoffun