Actions

Difference between revisions of "Decoding the SW Radiogram Broadcasts"

From The RadioReference Wiki

m
 
(19 intermediate revisions by the same user not shown)
Line 21: Line 21:
  
 
===I Dont Have A Radio Yet. Can I Use a Web Radio?===
 
===I Dont Have A Radio Yet. Can I Use a Web Radio?===
Yes you can. If you don't have the Stereo Mix app on your PC, you will need to install software like [http://stereomixplus.com/ Stereo Mix Plus] to route the audio from your speakers to the soundcard. You can find some online networks in our [[Live Tunable Receivers]] article.
+
Yes you can. If you don't have the Stereo Mix app on your PC, you will need to install software like [http://stereomixplus.com/ Stereo Mix Plus] to route the audio from your speakers to the soundcard. You can find some online networks in our [[Live Tunable Receivers]] article. See the topic below about routing audio to your PC for a lot more on this subject.
  
  
Line 41: Line 41:
  
 
==I Understand You Can Use an Android Device to Decode the Broadcasts?==
 
==I Understand You Can Use an Android Device to Decode the Broadcasts?==
Yes, the application is called TIVAR. To learn where to get it, and see how to use it, please see the [[Decoding the SW Radiogram Broadcasts with TIVAR]] article  
+
Yes, the application is called TIVAR. To learn where to get it, and see how to use it, please see the [[Decoding the SW Radiogram Broadcasts with TIVAR]] article Also see a new application called [https://sourceforge.net/projects/fldigi/files/AndFlmsg/ AndFLMsg]. Most of what is written in the above article will apply here
  
  
Line 47: Line 47:
 
This is a topic that is difficult to define simply, as there are so many possible ways to connect the two together. The method used for connecting a portable radio or desktop is very different how you would connect a Software Defined Radio (SDR). See the [[Connecting Radios to Soundcards]] article for an extensive discussion on this topic.
 
This is a topic that is difficult to define simply, as there are so many possible ways to connect the two together. The method used for connecting a portable radio or desktop is very different how you would connect a Software Defined Radio (SDR). See the [[Connecting Radios to Soundcards]] article for an extensive discussion on this topic.
  
People using the popular SDRPLAY SDRs should check the [[Copy SW Radiogram using SDRPlay SDRs]] article.
+
===SDR Information===
 +
*If you use the Funcube Dongle v2.0, see the page from the [http://funcubedongle.pbworks.com/w/page/62293238/Using%20with%20other%20programs Funcube Wiki]
 +
*People using the popular SDRPLAY SDRs should check the [[Copy SW Radiogram using SDRPlay SDRs]] article.
 +
*If you are a Winradio user, look at the [http://www.winradio.com/home/download.htm Winradio Software Downloads] page
  
If you are a Winradio user, look at the [http://www.winradio.com/home/download.htm Winradio Software Downloads] page
 
  
 
==What is this DRM listed on the WINB schedule? Can I Tune This or Decode it?==
 
==What is this DRM listed on the WINB schedule? Can I Tune This or Decode it?==
Line 60: Line 62:
 
</div>
 
</div>
 
; From the Signal Identification Wiki
 
; From the Signal Identification Wiki
 +
* What is [https://www.sigidwiki.com/wiki/Hellschreiber Feld Hell / Hellschreiber?]
 
* What is [https://www.sigidwiki.com/wiki/Multi_Frequency_Shift_Keying_(MFSK) MFSK?]  
 
* What is [https://www.sigidwiki.com/wiki/Multi_Frequency_Shift_Keying_(MFSK) MFSK?]  
 +
* What is [https://www.sigidwiki.com/wiki/Olivia Olivia?]
 
* What is [https://www.sigidwiki.com/wiki/Phase_Shift_Keying_(PSK) BPSK / QPSK?]  
 
* What is [https://www.sigidwiki.com/wiki/Phase_Shift_Keying_(PSK) BPSK / QPSK?]  
 
* What is [https://www.sigidwiki.com/wiki/THOR Thor?]  
 
* What is [https://www.sigidwiki.com/wiki/THOR Thor?]  
 
* What is [https://sites.google.com/site/kl4yfd/home/thormicro?fbclid=IwAR2rc4nYsm4GqLq0EzH4C9mapjCtgPukQQ4ihXNbVwhfJQuVzNfhRE-gCtM Thor Micro?]
 
* What is [https://sites.google.com/site/kl4yfd/home/thormicro?fbclid=IwAR2rc4nYsm4GqLq0EzH4C9mapjCtgPukQQ4ihXNbVwhfJQuVzNfhRE-gCtM Thor Micro?]
 +
* What is [https://sites.google.com/site/kl4yfd/home/dominoexmicro Domino EX Micro?]
  
  
Line 77: Line 82:
  
 
*[http://www.w1hkj.com/ W1HKJ home page - home for FLDigi]
 
*[http://www.w1hkj.com/ W1HKJ home page - home for FLDigi]
 +
*[http://www.w1hkj.com/beginners.html?fbclid=IwAR1l8du6Jfxhei0YA0lGwimhInBwKwoeNHi5CaAn9uRsI1gJWP5w-vj9f0k Beginner's Guide to FLDigi]
 
*[https://sourceforge.net/projects/fldigi/files/ FLDigi Downloads] Sourceforge site
 
*[https://sourceforge.net/projects/fldigi/files/ FLDigi Downloads] Sourceforge site
**Need to install flmsg and flamp as well
 
 
** [http://www.w1hkj.com/doku/doku.php?id=start Fldigi Wiki]
 
** [http://www.w1hkj.com/doku/doku.php?id=start Fldigi Wiki]
 
** [https://groups.io/g/winfldigi Fldigi mailing list]  
 
** [https://groups.io/g/winfldigi Fldigi mailing list]  
Line 85: Line 90:
 
* [https://www.hamradiodeluxe.com/ Ham Radio Deluxe] (includes DM780)
 
* [https://www.hamradiodeluxe.com/ Ham Radio Deluxe] (includes DM780)
 
** [https://wiki.hamradiodeluxe.com/index.php?title=Main_Page Ham Radio Deluxe wiki]
 
** [https://wiki.hamradiodeluxe.com/index.php?title=Main_Page Ham Radio Deluxe wiki]
** [http://forums.hrdsoftwarellc.com/ Ham Radio Deluxe support forums]
+
** [https://support.hamradiodeluxe.com/support/discussions Ham Radio Deluxe support forums]
 
** [https://www.facebook.com/HamRadioDeluxe/ Ham Radio Deluxe Facebook group]
 
** [https://www.facebook.com/HamRadioDeluxe/ Ham Radio Deluxe Facebook group]
  
Line 103: Line 108:
  
 
; FLDigi  
 
; FLDigi  
* 2 steps are required to set the RSID. See the image for what needs to be entered. The image comes from the old [http://www.rhci-online.net/radiogram/VoA_Radiogram_2015-01-03.htm VoA Radiogram] website
+
* You can get to the setting using ''Config'' then select ''Config Dialog''. Then in the menu, select ''IDs'' then ''RsID''.
** To access the form on the right, select ''Configure'' / ''Other'' / ''ID''. Hit '''Save''' when you are done.
+
* Apply the settings found in Figure 1,
** To access the form on the left, select ''Configure'' / ''Other'' / ''Notifications''. If you wish to create the macros, use the text box the purple arrows are pointing to. Be sure to hit '''Add''' or '''Update''' then '''Close'''
+
* Next, Go to ''Misc'' then ''Sweet Spot''. Make sure the ''Always Start'' button is turned off (Figure 2). Note that if you also use FLDigi for transmitting, you will need to come back here to turn it back on. Be sure to hit '''Save''' then '''Close''' when done.
 +
* If you wish to use Notifications, see the settings in Figure 3.
 +
* When you are done making changes go back to the main screen, select ''Config'' then ''Save config''. If you fail to do this, the changes will be lost when you close the session.
 +
 
 +
<gallery>
 +
Image:FLDigi RSID form.jpg|Figure 1
 +
Image:FLDigi sweet spot.jpg|Figure 2
 +
Image:FLdigi change notify.jpg|Figure 3
 +
</gallery>
  
  
 
; MultiPSK
 
; MultiPSK
* The screen shot is accessed from the RX/TX screen. See ''Configuration'' / ''Management of the identifiers''. Set ''Detection Mode'' to '''Continuous''' and set Modes to '''All'''  
+
[[Image:MultiPSK RSID Configuration.JPG|thumb|right|250px|MultiPSK RSID]]
 
+
* The screen shot is accessed from the RX/TX screen. See ''Configuration'' / ''Management of the identifiers''.
<gallery>
+
* Set ''Detection Mode'' to '''Continuous''' and set Modes to '''All'''  
Image:FLDigi Notifications Config.JPG|FLdigi RSID Setups
+
* Download ''The_RS_ID_easy_with_Multipsk'' (a Word .doc file) from the MultiPSK website
Image:MultiPSK RSID Configuration.JPG|MultiPSK RSID
+
* Also see the [https://www.youtube.com/watch?v=nwkz0GNpA0I Digital Mode Identifiers (YouTube video)] 
</gallery>
 
  
  
Line 132: Line 144:
 
*If you are copying images using MFSK and they appear slanted, you will need to apply a correction. Several digital decoding programs have this capability, and they are described in the links below;
 
*If you are copying images using MFSK and they appear slanted, you will need to apply a correction. Several digital decoding programs have this capability, and they are described in the links below;
 
** [http://www.w1hkj.com/FldigiHelp/digiscope_display_wwv_mode.html Correcting Sound Card Slant using FLDigi]
 
** [http://www.w1hkj.com/FldigiHelp/digiscope_display_wwv_mode.html Correcting Sound Card Slant using FLDigi]
 +
** [https://www.youtube.com/watch?v=-1wZ7uIA-Qs NBEMS/FLDIGI sound card calibration with CheckSR.exe (YouTube video)]
 
** [http://www.ke5rs.com/worldsstv/worldsstv-slant.html SSTV Slant Adjustment Help]
 
** [http://www.ke5rs.com/worldsstv/worldsstv-slant.html SSTV Slant Adjustment Help]
 
** [http://www.kk1x.net/mixw.html MixW Sound Card Calibration]
 
** [http://www.kk1x.net/mixw.html MixW Sound Card Calibration]
 +
*MultiPSK users should try the following (direct from the author of MultiPSK);
 +
;Calibration of the sound card
 +
It is strongly recommended to calibrate the sound-card: click on the "Adjustments" menu button, then select the "Determination of the RX/TX sound-card sampling frequencies" option and push on the "Determination of the 48 KHz RX sampling frequency (test on 3 minutes)" button. At the end of the test, click on "Return",
 +
;Sound level
 +
About the sound level ("Level" indication in % at the top of the screen): an AF level superior or equal to 10 % is OK. About 50 % is ideal (but not critical). In case of very low AF level, select "16 bits" in the "Determination of the RX/TX sound-card sampling frequencies" option ("Adjustments" menu button).
  
  
Line 169: Line 187:
 
* Return to [[DXing Digital Utilities]]
 
* Return to [[DXing Digital Utilities]]
 
* Return to [[Testing Your New Setup]]
 
* Return to [[Testing Your New Setup]]
 +
* Return to [[Shortwave Radiogram Gateway]]
  
  
 
[[Category:HF Modes]]
 
[[Category:HF Modes]]
 
[[Category:HF Signal Analysis and Decoding]]
 
[[Category:HF Signal Analysis and Decoding]]

Latest revision as of 19:51, 28 July 2020

Welcome to the Decoding the Shortwave Radiogram Broadcasts page. This page will help both newcomers as well as more experienced people with topics regarding decoding the digital broadcasts as advertised on the Shortwave Radiogram page. It's built in a Q&A style to make finding topics relevant to the user easier to find

What Kind of Radio Do I Need?

Just about any radio that covers the 2-30 Mhz range is capable of receiving these stations. It should be reasonably stable, selective and sensitive. This encompasses a wide range of radios, everything from portables, such as those from Tecsun and Degen, all the way to Software Defined Radios (SDR) such as the SDRPlay and Perseus. Even wide band radios like those from Icom and AOR can be used. It doesn't need to be expensive. To begin your research, see our HF Equipment and Accessories and Software Defined Radios articles.


What are some examples of portables used to receive the SWR broadcasts?

These are just a small sample of the portables reported to be used on the SWR Facebook and Twitter pages. There are numerous others, and the reader is encouraged to research these and other radios using the resources mentioned above.


I Dont Have A Radio Yet. Can I Use a Web Radio?

Yes you can. If you don't have the Stereo Mix app on your PC, you will need to install software like Stereo Mix Plus to route the audio from your speakers to the soundcard. You can find some online networks in our Live Tunable Receivers article. See the topic below about routing audio to your PC for a lot more on this subject.


What About Antennas?

It's been often said that the better the antenna, the better your results. Unfortunately sometimes that is difficult to obtain; you may be in a situation where outdoor antennas are not allowed, or you have very little space with which to work. What radio you are using, your budget and circumstances will play a large role in what you can use. Read our Basic HF Antennas article for a discussion on this topic.


How Can I Get a Better Signal?

If you have done as much as you can with your radio and antenna, but are still not satisfied with your results, there may be some more than you can do to improve your chances. See our Improving HF Reception for a discussion on this topic.


Where Can I Get the Schedule and Frequencies?

Take a look at the Shortwave Radiogram website. This is where the program for the week, along with the schedules and frequencies are posted. They are also repeated on mailing lists such as World of Radio (WoR) on groups.io


How Does the Signal Get to Me, Anyway?

We are very much at the mercy of the Sun when it comes to how signals get propagated across the globe. Unfortunately, as of this writing, we are in a very low period of solar activity, so we must depend on better radios and antennas to help. However, an understanding of how a signal propagates through the ionosphere is very important; this will help you to understand why a signal can be heard at some times but not others. See the AE4RV Propoagation Primer for a basic discussion on this topic. Be sure to turn your flash player on before looking at this site.


I Understand You Can Use an Android Device to Decode the Broadcasts?

Yes, the application is called TIVAR. To learn where to get it, and see how to use it, please see the Decoding the SW Radiogram Broadcasts with TIVAR article Also see a new application called AndFLMsg. Most of what is written in the above article will apply here


How Do I Get the Audio From My Radio (or SDR) To The PC?

This is a topic that is difficult to define simply, as there are so many possible ways to connect the two together. The method used for connecting a portable radio or desktop is very different how you would connect a Software Defined Radio (SDR). See the Connecting Radios to Soundcards article for an extensive discussion on this topic.

SDR Information


What is this DRM listed on the WINB schedule? Can I Tune This or Decode it?

DRM stands for Digital Radio Mondiale, a method of increasing the fidelity of a HF signal. Most any desktop or portable radio will need a special modification to be able to decode this; SDRs will need software. It will otherwise sound like a loud hash. See our DRM article for more information on this mode.


What Modes Are Being Used?

There are literally hundreds of different modems being used on the HF spectrum. Here, we are concerned with modes that are used in the amateur radio (ham) community, as software for these modes is readily available.

From the Signal Identification Wiki


Other Sources


Where Can I Find Compatible Software to Copy These Broadcasts?

While FLDigi is the most popular software used for this, it's not the only one that's capable of decoding these broadcasts. All of these applications recognize the use of the RSID to aid in recognizing the mode that is being sent. Questions or issues with the software should be directed to the indicated mailing lists, where specific help is available.


How do I configure the RSID feature to work with the SW Radiogram Broadcasts?

  • First a little background information; while the RSID is sent at an audio frequency of 1500 hz, there is a 1000 Hz tone start up tone that might confuse the decoders. This could be one reason why if you set this up to record automatically, you might not get a decode.


DM780 (Ham Radio Deluxe)


FLDigi
  • You can get to the setting using Config then select Config Dialog. Then in the menu, select IDs then RsID.
  • Apply the settings found in Figure 1,
  • Next, Go to Misc then Sweet Spot. Make sure the Always Start button is turned off (Figure 2). Note that if you also use FLDigi for transmitting, you will need to come back here to turn it back on. Be sure to hit Save then Close when done.
  • If you wish to use Notifications, see the settings in Figure 3.
  • When you are done making changes go back to the main screen, select Config then Save config. If you fail to do this, the changes will be lost when you close the session.


MultiPSK
MultiPSK RSID
  • The screen shot is accessed from the RX/TX screen. See Configuration / Management of the identifiers.
  • Set Detection Mode to Continuous and set Modes to All
  • Download The_RS_ID_easy_with_Multipsk (a Word .doc file) from the MultiPSK website
  • Also see the Digital Mode Identifiers (YouTube video)


How do I decode the signal when the center frequency drops to a very low level (i.e. 65 hz)?

  • Most soundcards won't go down below 200 Hz or so. To get around this, you must use a sideband capable radio or a SDR. Listen in either USB (preferable) or LSB. On LSB you must tune 1 kHz higher. On USB you must tune 1 khz lower. Because AM signals have two sidebands, the 65 Hz signal then becomes 1065 Hz and 935 Hz, and the AM carrier becomes 1000 Hz (which is the amount by which you offset your tuning), which you will also hear. So you will actually get three signals, the 1065 Hz signal is useful for decoding; the 935 Hz tones will be REVERSED.
    • The problem is mostly due to the IF and demodulator filtering. Many SSB receivers have a low passband edge of only 300 Hz, and some AM receivers have a highpass of 150 Hz. This applies during demodulation (like when making an audio recording or performing a live decode, or when demodulating an IQ recording to audio for decoding.)


  • Another method you can try with FLDigi;
    • Select the correct "Op Mode"
    • Use the waterfall's cursor and signal on a low frequency below the first tic mark.
    • Use the fine frequency arrow (found at the bottom center of the waterfall) to fine tune the frequency. The blue pen is indicating the rough frequency selection.
    • See this YouTube Video with an example (using QPSK63) of how this works.


My Images Decoding with MFSK Are Slanted

Calibration of the sound card

It is strongly recommended to calibrate the sound-card: click on the "Adjustments" menu button, then select the "Determination of the RX/TX sound-card sampling frequencies" option and push on the "Determination of the 48 KHz RX sampling frequency (test on 3 minutes)" button. At the end of the test, click on "Return",

Sound level

About the sound level ("Level" indication in % at the top of the screen): an AF level superior or equal to 10 % is OK. About 50 % is ideal (but not critical). In case of very low AF level, select "16 bits" in the "Determination of the RX/TX sound-card sampling frequencies" option ("Adjustments" menu button).


Are There Any Examples of These Applications In Actual Use?

These are YouTube videos with examples of each application above being used to decode an actual broadcast. There are many other examples on YouTube and a well formatted search will bring them up

Using DM780 (Ham Radio Deluxe)


Using FLDigi


Using MultiPSK


Does This Program Have A Social Media Site?