Actions

Difference between revisions of "Discriminator output"

From The RadioReference Wiki

Line 5: Line 5:
  
 
==Links==
 
==Links==
 +
'''Uniden'''
  
 
'''Radio Shack'''
 
'''Radio Shack'''
Line 10: Line 11:
 
*[[Pro 93/95/96 Tap | Pro-95 Discriminator Tap]]
 
*[[Pro 93/95/96 Tap | Pro-95 Discriminator Tap]]
 
*[[Pro 93/95/96 Tap | Pro-96 Discriminator Tap]]
 
*[[Pro 93/95/96 Tap | Pro-96 Discriminator Tap]]
*[http://www.naturalgfx.com/pro97_discriminator.htm | Pro 97]
+
*[http://www.naturalgfx.com/pro97_discriminator.htm | Pro 97 Discriminator Tap]
 
*[[Pro 2052 Tap | Pro-2052 Discriminator Tap]]
 
*[[Pro 2052 Tap | Pro-2052 Discriminator Tap]]
 
*[[Pro2053 tap | Pro-2053 Discriminator Tap]]
 
*[[Pro2053 tap | Pro-2053 Discriminator Tap]]
 +
 +
 +
'''Other Radios'''
  
 
== External Links==
 
== External Links==

Revision as of 17:24, 24 September 2006

The Discriminator output from a scanner is the raw, unfiltered signal that a scanner produces before it is sent to the audio stage for output through the speaker -- also called the "baseband audio." This discriminator source is required for applications such as Trunker, T4Win, and UniTrunker. Most scanners must have a simple modification made to them to feed the discriminator output to Data Slicers, or in the case of UniTrunker, a soundcard.

Note that for providing a signal for ACARS decoding, a connection from an earphone or speaker output is all that's required. This is because ACARS runs at a much lower speed, and the discriminator is not involved in AM reception.

Links

Uniden

Radio Shack


Other Radios

External Links

These pages or links contain more information on discriminator taps for many brands and models of scanners, including older models


Radio Shack Scanners


Uniden Scanners


Internal Pages