Difference between revisions of "Discriminator output"
From The RadioReference Wiki
Phil smith (talk | contribs) (→Links) |
Phil smith (talk | contribs) (→Links) |
||
Line 21: | Line 21: | ||
'''Other Radios''' | '''Other Radios''' | ||
− | |||
− | |||
== External Links== | == External Links== |
Revision as of 17:34, 24 September 2006
The Discriminator output from a scanner is the raw, unfiltered signal that a scanner produces before it is sent to the audio stage for output through the speaker -- also called the "baseband audio." This discriminator source is required for applications such as Trunker, T4Win, and UniTrunker. Most scanners must have a simple modification made to them to feed the discriminator output to Data Slicers, or in the case of UniTrunker, a soundcard.
Note that for providing a signal for ACARS decoding, a connection from an earphone or speaker output is all that's required. This is because ACARS runs at a much lower speed, and the discriminator is not involved in AM reception.
Links
Uniden
Discriminator Tap directions BC-396T Discriminator tap] **NOTE: You must be a member of the BCD396T Yahoo to view this message.
Radio Shack
- Pro-93 Discriminator Tap
- Pro-95 Discriminator Tap
- Pro-96 Discriminator Tap
- Pro 97 Discriminator Tap
- Pro-2052 Discriminator Tap
- Pro-2053 Discriminator Tap
Other Radios
External Links
These pages or links contain more information on discriminator taps for many brands and models of scanners, including older models
- Radio Shack Scanners
- Uniden Scanners
- BC-245 discriminator tap point
- BC-895 tap instructions
- BC-780 discriminator tap points
- BCD-396T tap instructions
- NOTE: You must be a member of the BCD396T Yahoo Group to view this message
- Discriminator Tap directions
- Image of circuit board for discriminator tap
Internal Pages
- MODIFYING THE UNIDEN BC796D SCANNER FOR DISCRIMINATOR AUDIO OUTPUT
- This procedure also works for the BC785D
- BC898T Discriminator Tap