Fire Tone Out
From The RadioReference Wiki
Fire-Tone Out Operation allows the scanner to operate in a standby mode and respond to fire tone-outs, a system comprised of standardized two-tone sequential paging, short one-tone paging, and long group tone paging. You can save up to 10 settings. When you select a setting in standby mode, the scanner also monitors for any other setting that uses the same transmit frequency, modulation, and attenuation settings.
See The Unofficial Fire Tone Out Tutorial & Guide.
Also see Guide to Using Audacity to Find Fire Tones.
- Software known to decode Fire Tone outs
- Counter.exe (found in the files section of several Yahoo groups, such as the BCD396 group)
- ComTekk Two Tone Decoder
- Two Tone Detect
- WinTone
Common Questions and Answers
Can I use the scanner and FTO at the same time?
- No, only one function can be active at a time. Use as a scanner, or monitoring for a FTO, but not both.
Why is my FTO scanning the FTO memories?
- The scanner is showing you all systems it is actively looking for. A tone alert on ANY will alert you whether that is the one currently displayed or not. The unit will alert on any tone on the same frequency (and mode).
Return to the Uniden DMA FAQ