Difference between revisions of "Freescan Create Group"

From The RadioReference Wiki

Line 56: Line 56:
Proceed to the [[[[Freescan Rebanding Support|Rebanding]] article<br>
Proceed to the [[Freescan Rebanding Support|Rebanding]] article<br>
Return to the [[Freescan Create Site|Create/Edit Site]] article<br>
Return to the [[Freescan Create Site|Create/Edit Site]] article<br>
Return to the [[FreeScan User Guide]]
Return to the [[FreeScan User Guide]]
[[Category:Software Applications]]
[[Category:Software Applications]]

Revision as of 14:33, 19 October 2008

Editing a group is the lowest level in the Dynamic Memory Architecture. Here you can have either frequencies (if you've allocated a conventional system) or talkgroups (for a trunked system). This screen can be accessed by putting the cursor on a group in the System View (the white shaded area on the left) or by hitting the Group button to the right of the 'Create' item in the toolbar.

Editing a Conventional Group

  • Name - the name allocated when the import from the UASD or RadioReference completed, or the one used when the group was allocated manually. Notice that it can be justified using one of the three tools at the top right of the name field, or by using the Justify Channel Names function.
  • Quick Key - the Group Quick Key (GQK) assigned to this group. The Find Free button will attempt to find the next unassigned GQK - however you can override this with the pulldown
  • Locked Out - If checked, this group is locked out and will not be scanned
  • Notice that over the Display column are three tools - these will also justify the display names.
  • + - Insert a line
  • X - Delete a line
  • Up/Down arrow - moves a line up or down in the display
  • EZ-GRAB - See the EZ GRAB article on how to use this function
  • Display - The alpha text to be displayed when the group is scanned. Limited to 16 characters for the 996 and 15.
  • Frequency - in Mhz
  • Step - The seperation, in khz, between each frequency. In most cases AUTO will work, although you may need to change it if defining a narrow band system. See the Refarming article for a discussion of narrowbanding, and its impact on frequency allocations. This option is only applicable to the SC230 & BC246T.
  • Mod - the operating mode for this frequency
  • L/O - If checked this frequency is locked out
  • ATT - If checked this frequency is attenuated in signal strength by 20db
  • PRI - Priority. If checked this frequency is checked every 2 seconds
  • TONE - Either PL or DCS - the subaudible tone associated with this frequency. You can also use this to select 'Search' mode.
  • Alt Tone - Alert Tone. Set off an alert when the channel becomes active.
  • Alt Lvl - Alert Level. Varies between 1 and 15
  • Type - Alert type. There are 9 different types of alerts; consists of varying beep types.
  • Tone LO - Tone Lockout. Sets the tone for the scanner to ignore; in other words, if the scanner detects the tone the signal will by bypassed.
  • Tape - when it's ON or ALL this channel's audio will be sent to the tape out jack. For use with the BCT15 and BCD996
  • Comment - Comments stored within FreeScan, and not uploaded to the scanner

Editing a Trunked Group

Most every key shown here is also defined on the Conventional screen. The TGID is the Talkgroup ID for the system being defined.

Proceed to the Rebanding article
Return to the Create/Edit Site article
Return to the FreeScan User Guide