Freescan Downloads

• Freescan Scanner pulldown.JPG

  Figure 1

• Freescan download1.JPG

  Figure 2

• Freescan download2.JPG

  Figure 3

• Freescan download3.JPG

  Figure 4

• Download com error.JPG

  Figure 5

• Quick editor1.JPG

  Figure 6

Click on the image to expand

1. Select 'download programming' from the pulldown menu (Figure 1)
2. The download screen appears. Check to see all the options on the right are the ones you want. Click 'Queue System List' (Figure 2)
3. The list of available systems in the scanner is shown (figure 3). Deselect/Select those systems to be downloaded and click the 'Start Download' key
4. Figure 4 shows a typical result. Examine the number of errors. If it seems high, you may need to uncheck the Turbo mode, or if running in Linux, click the Linux mode and reexecute.
5. If a COM error is encountered (cannot connect, too many errors, ect.) click on the 'Freescan' link in the upper left corner. Select 'Setup Com Port' from the pulldown, as shown in Figure 5. See our Making the Connection article for more information.
6. The Quick Editor (figure 6) can be used to quickly delete an entire system from the scanner. To remove a system, first hit 'read scanner', then click on the desired system. Hit 'Nuke Selected Systems'. 'Reset All Memory' will clear the scanner memory so use with caution.

Return to the FreeScan User Guide