Actions

Freescan Tips

From The RadioReference Wiki

Revision as of 14:19, 5 September 2008 by Cpuerror (talk | contribs) (New page: * The 996 & 15 scanners have a TGID Limit of 250 TGIDs per trunk system. The 246/330/396 scanner have a 200 TGID limit. FreeSCAN will store more then this number in memory, however the sca...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  • The 996 & 15 scanners have a TGID Limit of 250 TGIDs per trunk system. The 246/330/396 scanner have a 200 TGID limit. FreeSCAN will store more then this number in memory, however the scanner will only take a limited number during upload.
  • FreeSCAN supports the 996/15 feature of having multiple trunk sites in one system. This feature is not supported in the 246/330/396. If you attempt to upload a multi-site system to one of these scanners, FreeSCAN will split the sites up into individual systems and put all the TGID groups in one system only.
  • FreeSCAN will not allow you to upload a fully digital P25 system to an analog scanner since these scanners have no chance of being able to track these systems.
  • When you bring up the download window, it will preserve the system names of previous detected systems. If you have made any changes whatsoever to your scanner's programming since last bringing up this list, you should reclick on Queue System List before downloading. This is because the system index IDs will shift around inside the scanner's memory when you make changes, and if FreeSCAN doesn't get an updates list then it will not be able to download the systems.
  • FreeScan does not currently support setting the P25 levels on the 395 and 996 when creating a P25 system. Applying version 2.0 firmware or later is strongly suggested, as digital decoding is improved in these versions. For information on how to set these values manually, please see the following;

Return to the FreeScan User Guide