Actions

Freescan Upload

From The RadioReference Wiki

Revision as of 08:06, 8 September 2008 by Ka3jjz (talk | contribs)

Click on the image to expand

  1. Load the file you wish to upload. Figure 1 shows an example
  2. From the Scanner pulldown, select 'Upload Programming' (Figure 2)
  3. The upload dialog is displayed. Verify that the COM port and speed are correct. If you wish to wipe out the previous contents of the scanner, insure that the Erase All Systems button is checked. When all options are set the way you want them, hit the 'Load Programming' button (Figure 3)
  4. It can take up to 20-30 seconds to clear the scanner menu and begin the reload process. You will be notified when the process is complete.
  5. If a COM error is encountered (cannot connect, ect.) click on the 'Freescan' link in the upper left corner. Select 'Setup Com Port' from the pulldown, as shown in Figure 4. See our Making the Connection article for more information.





Return to the FreeScan User Guide