Actions

IC-PCR100

From The RadioReference Wiki

Revision as of 17:45, 29 November 2006 by Trunker (talk | contribs)
Icom PCR-100
Screen shot 1
Screen shot 2

This page lists links, related pages and software support for the Icom PCR-100 receiver.


General Specifications

  • 10kHz-824MHz, 849-869, 894-1300MHz range (USA)
  • Scan rate 16cps
  • WFM, FM, AM, Auto
  • 1000 channels per file (50 channels x 20 banks)
  • 1, 5, 6.25, 9, 10, 12.5, 15, 20, 25, 30, 50, 100, 500kHz; 1MHz steps
  • CTCSS
  • Attenuator
  • Automatic noise limiter (ANL)
  • Narrow/wide filter
  • Autostore
  • 20 search limits
  • Signal meter
  • Bandscope
  • Icom PCR-100 Specs

Reviews and User Opinions

Related Pages

Supporting Software

Yahoo Groups and Mailing Lists (software and receiver support)

Modifications

Discriminator

10.7 MHZ IF Output

The buffered 10.7 MHz IF Output is available at the emmiter of transistor of Q85. Q85 is located close to the edge of the large board, near J1. If you place the radio with the antenna connection to the left, Q85 is the first transisor to the right of the smaller IF filter at the top lefhand corner of the RF board. This is directly above the metal can for one of the LO's. The emmitter is the upper left terminal (if the radio is oriented as described above). There will be a DC level at this point, so will want a coupling capacitor. (Thanks to gr8amp in the forums)

Other


eBay Listings


Back to Icom Radios