Actions

IC-PCR1000

From The RadioReference Wiki

Icom IC-PCR1000
Screen shot 1
Screen shot 2

This page lists links, related pages and software support for the Icom PCR1000 receiver. The technical specifications can be viewed here (copied from Icom website via Universal Radio).


General Specifications

  • 10kHz-824MHz, 849-869, 894-1300MHz range (USA)
  • WFM, FM, AM, SSB, CW
  • 1000 channels per file
  • 1, 5, 6.25, 9, 10, 12.5, 15, 20, 25, 30, 50, 100, 500kHz; 1MHz steps (?)
  • Bandscope
  • Noise blanker
  • Signal meter
  • Digital AFC
  • Autostore
  • Automatic gain control (AGC)
  • Narrow/wide filters
  • Icom PCR1000 Specs

Modifications

Reviews and User Opinions

Related Pages

Supporting Software

Yahoo Groups and Mailing Lists (software and receiver support)

Modifications

Discriminator

10.7 MHZ IF Output

The buffered 10.7 MHz IF Output is available at the emitter of transistor Q85. Q85 is located close to the edge of the large board, near J1. If you place the radio with the antenna connection to the left, Q85 is the first transistor to the right of the smaller IF filter at the top lefthand corner of the RF board. This is directly above the metal can for one of the LO's. The emitter is the upper left terminal (if the radio is oriented as described above). There will be a DC level at this point, so will want a coupling capacitor. (Thanks to gr8amp in the forums)

Other


eBay Listings


Back to Icom Radios