Actions

Difference between revisions of "IC-R7000"

From The RadioReference Wiki

m
Line 42: Line 42:
 
* [http://www.frequencymanager.de/ Frequency Manager]
 
* [http://www.frequencymanager.de/ Frequency Manager]
 
* [http://www.geocities.com/SiliconValley/1552/radioctl.html RadioCtl]
 
* [http://www.geocities.com/SiliconValley/1552/radioctl.html RadioCtl]
* [http://www.radioctl.com/ RadioControl]
 
 
* [http://www.datadeliverydevices.com/RadioMax.htm RadioMax]
 
* [http://www.datadeliverydevices.com/RadioMax.htm RadioMax]
 
** [http://www.datadeliverydevices.com/MTRevue.htm MT 1998 Review by John Catalano]
 
** [http://www.datadeliverydevices.com/MTRevue.htm MT 1998 Review by John Catalano]
Line 54: Line 53:
 
* [http://www.scanstar.com/products/manager.htm Spectrum Manager]
 
* [http://www.scanstar.com/products/manager.htm Spectrum Manager]
 
* [http://www.monteriallc.com/spectrum/dominator_feat.htm Spectrum Dominator]  
 
* [http://www.monteriallc.com/spectrum/dominator_feat.htm Spectrum Dominator]  
 +
* [http://www.radioctl.com/ SysLabs RadioControl]
 
* [http://www.trx-manager.com/ TRX-Manager]
 
* [http://www.trx-manager.com/ TRX-Manager]
 
** [http://www.eham.net/reviews/detail/680 EHam comments on TRX-Manager 1]
 
** [http://www.eham.net/reviews/detail/680 EHam comments on TRX-Manager 1]

Revision as of 20:45, 21 November 2009

Icom IC-R7000

This page lists links, related pages and software support for the Icom R-7000 receiver. The technical specifications can be viewed here (From the Icom website).


General Specifications

  • 99 memories
  • 25-1000, 1025-2000MHz range
  • Scan rate 8cps (max)
  • AM, WFM, FM, LSB, USB
  • 100Hz; 1, 5, 10, 12.5, 25kHz steps
  • Priority scan
  • Autostore (20 channels)
  • Voice squelch control (VSC)
  • Analogue signal meter
  • Noise blanker (NB)
  • Attenuator
  • Wireless remote control (optional)
  • Tape recorder control
  • Computer control
  • Icom R-7000 Specs

Filters and other mods

Reviews and User Opinions

Related Pages

  • Universal Radio R-7000 page
  • Donner's Rig Control page
  • Icom manuals
  • Service manual (22MB-Pdf)
  • Some Tech info by LUIX (in spanish)
  • Here is a schematic (PDF file) for an interface used with Trunker and a Icom R7000. For this example, a PRO-43 scanner is used to obtain the data channel. The interface obtains power from the Icom, so there is no issue with weak ports not being able to power the slicer. The IC Chip used is a MAX203 for minimum parts count, but a MAX232 would work just as well. The MAX203 can be obtained from Digi-Key. This interface has also been tested with an Icom IC-R7100. This interface may also work for other radios that use TTL serial levels if another source of 9-12V is available, or 5V if the regulator is left out. (Thanks to Gene!)

Supporting Software

Yahoo Groups and Mailing Lists (software and receiver support)

eBay Listings


Back to Icom Radios