Difference between revisions of "Kenwood TK-3101"
From The RadioReference Wiki
(New page: 30-channel radios CTCSS & DCS encode/decode Radios are shipped with FRS/GMRS frequencies preprogrammed. With proper software and cable these radios are capable of conventional freque...) |
(corrected bad links) |
||
| Line 1: | Line 1: | ||
| − | + | 30-channel radios [[CTCSS]] & [[DCS]] encode/decode | |
| − | 30-channel radios [[CTCSS & DCS]] encode/decode | ||
Radios are shipped with FRS/GMRS frequencies preprogrammed. With proper software and cable these radios are capable of conventional frequencies. | Radios are shipped with FRS/GMRS frequencies preprogrammed. With proper software and cable these radios are capable of conventional frequencies. | ||
Revision as of 18:42, 12 July 2009
30-channel radios CTCSS & DCS encode/decode
Radios are shipped with FRS/GMRS frequencies preprogrammed. With proper software and cable these radios are capable of conventional frequencies.
To change banks from A to B - Hold the PTT and the Monitor button, power on and continue to hold those two buttons. When you see the LED light up as orange then release both buttons. Then press the PTT once, then it will turn red and it will give off two beeps, then press the PTT, (two beeps for Bank B, one beep for Bank A). After you select which bank you want, let the radio set until it gives another beep and then power it off and back on.
Only downfall is that this radio does not scan
TK-3101 UHF (450-490)