Difference between revisions of "NAC"
From The RadioReference Wiki
(added back link for Project 25) |
(add category link) |
||
| Line 7: | Line 7: | ||
* 0xf7e ($F7E) - a receiver set for this NAC will unsquelch on any NAC received | * 0xf7e ($F7E) - a receiver set for this NAC will unsquelch on any NAC received | ||
* 0xf7f ($F7F) - a repeater receiver set for this NAC will allow all incoming signals and the repeater transmitter will retransmit the received NAC. | * 0xf7f ($F7F) - a repeater receiver set for this NAC will allow all incoming signals and the repeater transmitter will retransmit the received NAC. | ||
| + | [[Category:RR Glossary]] | ||
Revision as of 14:48, 2 July 2007
Network Access Code
For Project 25 digital radios, the NAC is similar to CTCSS or DCS in analog use. That is, radios can be programmed to only break squelch when receiving the correct NAC. NAC's are programmed as a 3 digit hexadecimal code that is broadcast along with the digital signal being transmitted.
Since the NAC is 3 digit hexadecimal number(12 bits), it gives 4096 possible NAC's for programming, which far exceeds its analog counterparts combined. It should be noted that 3 of the possible NAC's have special meaning:
- 0x293 ($293) - the default NAC
- 0xf7e ($F7E) - a receiver set for this NAC will unsquelch on any NAC received
- 0xf7f ($F7F) - a repeater receiver set for this NAC will allow all incoming signals and the repeater transmitter will retransmit the received NAC.