Actions

Difference between revisions of "Object Oriented Scanners Issues"

From The RadioReference Wiki
 
(16 intermediate revisions by 4 users not shown)
Line 1: Line 1:
−
This is a stub article<br>
+
==What Scanners Does this Article Discuss?==
 +
The following scanners are covered in this article
  
−
Please put all information on operating issues (except overloading issues, which has its own article) and how to resolve them here. Be sure to keep the category and return links as the last 2 lines in this article.
+
{{Text_ObjectOrientedScannersTable}}
  
  
 +
{{Text SDObjectOrientedScannersTable}}
  
−
* Search Steps - PRO-197 / PSR-600 Search steps or increments are not definable by the user. GRE says this feature is often requested.
 
−
*TSYS objects -  PRO-197 / PSR-600 A TSYS object must be created before a TGRP. If the NEW / TSYS buttones are pressed too quickly, a blank TSYS is created. Press the buttons slowly.
 
  
 +
Please put all information on operating issues (except [[Object Oriented Scanners Overload Issues|overloading issues]], which has its own article) and how to resolve them here. If the tip is specific to a scanner or scanners, please be sure to mention this.
  
  
 +
==General Tips==
 +
*Default scanlist - The default scanlist is 01. If you're creating objects manually but can't find them, check scanlist 01.
  
 +
*Search Steps - Search steps or increments are not definable by the user. Try changing the BandPlan setting to Canada for 5 kHz steps. GRE says this feature is often requested.
  
 +
*'''Nothing Enabled''' error:
 +
**No scanlists are enabled. Turn on one or more scanlists.
 +
**Scanlists are enabled but empty. Create and/or associate objects with scanlists.
 +
**Scanlist is enabled but all objects in scanlist are locked out. Unlock some objects.
 +
**Note - (Pro-106/197 and PSR-500/600 only) For a TSYS it's possible to lock out a wildcard talkgroup AND the TSYS itself, which will cause '''Nothing Enabled''' until both are unlocked.
  
  
 +
==Pro-106/197 and PSR-500/600 Tips==
 +
*TSYS / TGRP objects - A TGRP object must be created before a TSYS. If the NEW / TGRP buttons are pressed too quickly, a blank TGRP is created in the default scanlist. Press the buttons slowly.
 +
 +
*If you find the Signal Stalker/Spectrum Sweeper is consistently off frequency (Pro-106/197 and PSR-500/600 only);
 +
**Prog Func F3 Down To Zeromatic Values
 +
**Enter The following 8 Numbers In Order
 +
<pre>
 +
170
 +
480
 +
150
 +
530
 +
170
 +
480
 +
150
 +
530
 +
</pre>
  
  
Line 19: Line 44:
  
 
Return to the [[GRE/RS Object Oriented Scanners FAQ]]
 
Return to the [[GRE/RS Object Oriented Scanners FAQ]]
 +
 +
Return to the [[GRE/RS PC Object Oriented FAQ]]
 
[[Category:Object Oriented Scanners]]
 
[[Category:Object Oriented Scanners]]
 +
[[Category:Handheld Scanners]]
 +
[[Category:Mobile Scanners]]
 +
[[Category:Digital Scanners without DMR]]
 +
[[Category:Digital Scanners without MOTOTRBO]]
 +
[[Category:Digital Scanners with DMR]]
 +
[[Category:Digital Scanners with MOTOTRBO]]
 +
[[Category:Digital Scanners without NXDN]]
 +
[[Category:Digital Scanners without ProVoice]]
 +
[[Category:Radio Shack Scanners]]
 +
[[Category:GRE Scanners]]
 +
[[Category:Whistler Scanners]]
 +
[[Category:Scanners Error Messages]]
 +
[[Category:Programming FAQs and Tips for GRE Scanners]]
 +
[[Category:Programming FAQs and Tips for Radio Shack Scanners]]
 +
[[Category:Programming FAQs and Tips for Whistler Scanners]]

Latest revision as of 14:16, 18 November 2016

What Scanners Does this Article Discuss?

The following scanners are covered in this article

GRE Model Older RS Model Newest RS Model Whistler Model
PSR-3101
PSR-4101
PSR-500 Pro-106 Pro-651 WS1040
PSR-600 Pro-197 Pro-652 WS1065
  1. Trunking w/ Analog Voice Only scanners, others shown in table can handle up-to Digital P25 Phase I


GRE Radio Shack Whistler
PSR-7007 Pro-1077
Pro-181,5,8
PSR-8002,5,8 Pro-6682,5,8 WS10802,3,8
WS10882,3,6
TRX-12,3,4
PSR-9009 WS10952,3
WS10982,3,6
TRX-22,3,4
  1. Released around the time the PSR-800 was, but lacking additional/advanced features SEE #5.
  2. Project 25(P25) Phase I and II decoding.
  3. Capable of DMR decoding, with a free Upgrade to the latest Firmware via Whistler's EZ-Scan software.
  4. Capable of NXDN decoding, with a free Upgrade to the latest Firmware via Whistler's EZ-Scan software
  5. Ability to be Upgraded for DMR (and add P25 Phase II to Pro-18) decode with a Paid Upgrade with User paid shipment to Whistler, returned by them. Once, returned, continued forward support is possible via Whistler Repair and EZ-Scan Software, with all the newer additions and features of a WS1080.
  6. Variant with Keypad
  7. Trunking w Analog Voice Only
  8. ALL THE SAME after UPGRADE except silk screening
  9. Never released publicly, subsequently became WS1095


Please put all information on operating issues (except overloading issues, which has its own article) and how to resolve them here. If the tip is specific to a scanner or scanners, please be sure to mention this.


General Tips

  • Default scanlist - The default scanlist is 01. If you're creating objects manually but can't find them, check scanlist 01.
  • Search Steps - Search steps or increments are not definable by the user. Try changing the BandPlan setting to Canada for 5 kHz steps. GRE says this feature is often requested.
  • Nothing Enabled error:
    • No scanlists are enabled. Turn on one or more scanlists.
    • Scanlists are enabled but empty. Create and/or associate objects with scanlists.
    • Scanlist is enabled but all objects in scanlist are locked out. Unlock some objects.
    • Note - (Pro-106/197 and PSR-500/600 only) For a TSYS it's possible to lock out a wildcard talkgroup AND the TSYS itself, which will cause Nothing Enabled until both are unlocked.


Pro-106/197 and PSR-500/600 Tips

  • TSYS / TGRP objects - A TGRP object must be created before a TSYS. If the NEW / TGRP buttons are pressed too quickly, a blank TGRP is created in the default scanlist. Press the buttons slowly.
  • If you find the Signal Stalker/Spectrum Sweeper is consistently off frequency (Pro-106/197 and PSR-500/600 only);
    • Prog Func F3 Down To Zeromatic Values
    • Enter The following 8 Numbers In Order
 170
 480
 150
 530
 170
 480
 150
 530



Return to the GRE/RS Object Oriented Scanners FAQ

Return to the GRE/RS PC Object Oriented FAQ

Retrieved from "https://wiki.radioreference.com/index.php?title=Object_Oriented_Scanners_Issues&oldid=218341"