Difference between revisions of "Object Oriented Scanning tips"

From The RadioReference Wiki

Line 30: Line 30:
* [[Simulcast digital distortion]]
* [[Simulcast digital distortion]]
* [ Google Spread Sheet Collaboration of PGM + FUNC + F3 (GLOB) "Expert Setting" Menu Information]
Return to the [[GRE/RS Object Oriented Scanners FAQ]]
Return to the [[GRE/RS Object Oriented Scanners FAQ]]
[[Category:Object Oriented Scanners]]
[[Category:Object Oriented Scanners]]

Revision as of 11:53, 5 January 2009

  • Activate/Deactivate Scan Lists: Sets membership in Scan Lists. Use left and right keys to scroll through Scan Lists. Use SEL key to toggle Scan List membership. A “*” next to the Scan List number indicates that the object is mapped to that Scan List.
  • Default Scanlist: When programming an object, select the scan list using the menu or the default scan list one will be used. To return an object to your selected scanlist, set the default the the scanlist to the number you want. To return an object to the default during EDIT or NEW press Dflt.
  • Dupe function: To repeat commonly used object attributes, use the Dupe function.
  • Object access: To go to an object, press MAN or PGM and the object number, then press E to goto the object.
  • Force Analog: If you have a CONV object that you know is analog, You can set the object to tone search to force it as analog.
  • Force Digital: If you have a CONV object (or trunked) that you know is digital, you can force it as digital by forcing it to search for P25 NAC.
  • Flex Step: "Super Expert Setting Menu". PGM, FUNC F3:GLOB Scroll down to "flexStep" and Rt-Arrow it to "On" F1:Save
  • Audio Boost: Expert menu, AudioBoost, On or OFF, Applies a 6 dB boost to audio levels when the object is active
  • Delete Alpha Characters during entry: Func + CL will delete all the characters in a line. Use the "." (decimal) key to delete a character and make a blank space.
  • Battery Settings: Change the battery setting in the Global menu: Alkaline, NiCad, or NiMIH, to set the proper battery warnig levels for the battery type you are using.
  • Quick Menu Move: Func + Up or Down will move to the top or bottom of a menu.
  • Go directly to a newly saved conventional object: Press MAN right after pressing "Stor" in the search, you'll be taken right to the CONV object you just stored.
  • Object Search: If you press manual, you can then scroll through the scanlist (the default save to, is scanlist 1) with the up/down arrows. You can also use the Find feature. press Program, Edit, Find enter a alpha text or frequency. And you can find it by object type by pressing Program, Edit, press left or right key to select the object type, such as CONV, the the up down arrow to select the conventional object.
  • Signal Strength Meter Settings: A setting of 470-750, provides a more relative indication of signal bars than the default range.
  • EDACS Narrow: For some systems, the control channel data may need to be inverted. Once the EDACS narrow system is created, arrow down to the "Expert Below" section until you see "Invert Data: No", arrow right or left to display "Yes", press Save (F1) to save changes.

Return to the GRE/RS Object Oriented Scanners FAQ