Oil spill cleanup

Summary of Oil Spill Response and Cleanup Frequencies for San Francisco Bay, California

This information is specific to Northern California and was parsed from an online USCG document Oil Spill Response and Cleanup Found by user linkousk Submitted 7-6-2008

The primary frequency during the initial response is CLEMAR 154.920, but is expected to shift at some point to CALCORD 156.075Mhz as additional organizations join the MAC.

In central and northern California, OSPR wardens’ and biologists’ working frequencies are 159.435Mhz(Tx) and 151.415Mhz (Rx). (CA Fish and Game)

CALCORD (VHF-FM 156.075Mhz) is the primary frequency for coordination among state and local government agencies in a multi-agency response.

Local fire and emergency medical services agencies also use frequencies within the FIRESCOPE system.

Local law enforcement agencies, county sheriffs, and the California Highway Patrol CLEMAR system for inter-jurisdictional coordination. Four primary VHF-FM frequencies and two primary UHF-FM frequencies listed below for use in oil spill containment and cleanup operations.

1. 150.980Mhz VHF-FM

2. 154.585Mhz VHF-FM

3. 158.445Mhz VHF-FM

4. 159.480Mhz VHF-FM

5. 454.000Mhz UHF

6. 459.000Mhz UHF
Marine Channels in Use:
Marine ch6 156.3 Safety Freq Also Gru San Fran Secondary Public Liaison

Marine ch12 156.6 Intership Safety Also VTS San Fran Offshore Sector

Marine ch13 156.65 Bridge to Bridge

Marine ch14 156.7 VTS San Fran Inshore Sector

Marine ch16 156.8 International Calling and Distress Only for hailing and distress

Marine ch21A 157.05 Gru San Fran Primary, Gru Humboldt Bay Secondary

Marine ch22A 157.1 USCG only, Public Liaison, Safety Bcsts

Marine ch23A 157.05 Sta Monterey Primary

Marine ch83A 157.175 Group Humboldt Bay Primary

CLEMAR- US Fish & Wildlife, OSPR & Ca. Local Govt. Primary

CALCORD- Local Govt. Secondary Ca. and Fed. Govt. only

VHF 150.98 MSRC Primary [Not a Marine Band frequency]

UHF am 381.8 CG Aircraft Primary

UHF 454.0 Clean Bay Primary Clean Bay also can assign VHF-FM freqs as required for working/liaison

UHF 459 Clean Bay Secondary

U.S. Coast Guard working frequencies

Channel 81A (157.075Mhz) - Communication between U.S. Coast Guard units and other Coast Guard personnel who are part of the OSC staff.

UHF 381.8 - The primary working frequency between the Unified Command and U. Coast Guard aircraft.

Channe21A - Primary working/SAR frequency of Group Humboldt Bay.

Channe83A - Primary working/SAR frequency of Group Humboldt Bay.

Channel 16 - (156.8Mhz) Designated under international convention for use for ship-to-ship and ship-to-shore hailing and distress in international waters. ALL users are required to use channel 16 for only these purposes and then switch to other channels for subsequent communications. Oil spill response is no exception.

Channel 13 - (156.65Mhz) Designated bridge-to-bridge hailing and navigation safety frequency in inland and offshore waters. It may be used only to establish contact and make arrangements between vessels in crossing, meeting, or overtaking situations in accordance with the International or Inland Navigation Rules.

Ch. 06 (156.3Mhz) Safety Frequency - is designated as the frequency which may be used by all parties for communication on matters involving human health and safety. FCC regulations require all vessels equipped with VHF-FM capability to have this channel. As there is expected to be little other traffic on this channel during an oil spill response, this should be monitored by all involved units that have this channel available, and regarded as a tertiary channel for the response.