Actions

Difference between revisions of "PSR-800"

From The RadioReference Wiki

m
Line 3: Line 3:
 
[[Image:PSR-800LG.jpg|right|thumb]]
 
[[Image:PSR-800LG.jpg|right|thumb]]
  
The PSR-800 was manufactured by GRE in China and is nearly the same as the Radio Shack [[Pro-18]] iScan Digital Trunking radio (See below).
+
The PSR-800 is manufactured by GRE in China.
  
 
==General Specifications==
 
==General Specifications==
* A brochure for the PSR-800 can be downloaded here: [http://www.greamerica.com/download/specs/PSR-800.pdf PSR-800 Brochure].
 
 
* [[Rebanding]] supported?  {{Color|Green|YES}} EZ-Scan will import tables for identified rebanded systems from the RadioReference database.
 
* [[Rebanding]] supported?  {{Color|Green|YES}} EZ-Scan will import tables for identified rebanded systems from the RadioReference database.
* USB 2.0 Compliant Interface built in.
+
* USB 2.0 Compliant Interface Built In
*Dimensions approximately 5 5/16 x 2 1/8” x 1 1/16” (135 x 67 x 28 mm) (HWD).
+
* 200 Scan Lists
*Weight approximately 7.4 oz. (210g) without accessories and batteries.
+
* 200 V-Folders
*BNC connector.
+
* A brochure for the PSR-800 can be downloaded here: [http://www.greamerica.com/download/specs/PSR-800.pdf PSR-800 Brochure]
*Operating voltage
 
**DC 4.8 Volts (“AA” cell x 4pcs. Ni-MH Batteries).
 
**DC 6 Volts (“AA” cell x 4pcs. ALKALINE Batteries).
 
**Ext. power and charge voltage USB Power (DC 5V 500mA).
 
** If batteries and the power cable are removed for more than ~1 minute, the clock and time will need to be reset by hand or through the software.
 
  
 
<br>
 
<br>
Line 167: Line 161:
 
|}
 
|}
  
* [http://en.wikipedia.org/wiki/Object_oriented Object oriented memory management]. See the [[Object Oriented Scanning Described]] article for more information.
+
*Dimensions approximately 5 5/16 x 2 1/8” x 1 1/16” (135 x 67 x 28 mm) (HWD)
* Object capacity (Nominal, with 2 GB MicroSD Card): > 10 million, varies depending on user configuration.
+
*Weight approximately 7.4 oz. (210g) without accessories and batteries
* Location-based Scanning - allows you to enter your zip code, city, or county to select channels to scan in the US (only).
+
*Operating voltage
* 201 Scan Lists; 200 regular lists and a SkyWarn list.
+
**DC 4.8 Volts (“AA” cell x 4pcs. Ni-MH Batteries)
* 20 Scan Sets; create a set of scan lists tailored to your favorite scan list settings.
+
**DC 6 Volts (“AA” cell x 4pcs. ALKALINE Batteries)
* 200 V-Folders with second generation Virtual Scanner Memory Management system. One copy of working memory can hold a virtual numbers of objects, meaning any combination of talkgroups, conventional channels, and trunking systems. Each V-Scanner II folder holds one copy of working memory. Actual memory size is determined by the size of the microSD card memory size used.
+
**Ext. power and charge voltage USB Power (DC 5V 500mA)
* Preprogrammed with all systems currently in the Radioreference database with ability to update as needed or once a week.
+
* If batteries and the power cable are removed for more than ~1 minute, the clock and time will need to be reset by hand or through the software.
* 4 way navigation keys to access special modes and programming options emulating today's standard media player operation.
+
* The PSR-800 uses a normal USB device cable. The 800 uses a logical device and installs drivers for both the radio and the microSD card.
* Easy-to-read back lit control and display with back lit keypad with user selectable settings.
 
* [[Spectrum Sweeper]] Near field frequency capture.
 
* Tri-color alert LED - Object programmable; eight factory default colors to any color / brilliance you want by having direct access to the R-G-B drive values (including flash) to assign to talkgroups, frequencies, agencies, etc. Example settings are shown in the owners manual.
 
** LATCH option; the color of the last received object stays on until reset.
 
* Programmable Backlight Flash Patterns - The backlight can be programmed to flash with custom flash patterns when certain objects are active, providing another way alerting the operator when important radio traffic is present.
 
* Audible Alarms - programmable audible alerts can be configured when certain objects are active.
 
* Audioboost (software only) - available for conventional frequencies, IDs, and entire trunked systems, boosts the audio levels slightly louder.
 
 
* Recording / playback of objects or all received audio at a set volume unchanged by the volume control.
 
* Recording / playback of objects or all received audio at a set volume unchanged by the volume control.
 
** Audio codec is AU format and is time/date stamped at the header file of the audio sample.
 
** Audio codec is AU format and is time/date stamped at the header file of the audio sample.
 
** AU audio files can be played via Windows Media Player, WinAmp, and other players.
 
** AU audio files can be played via Windows Media Player, WinAmp, and other players.
 
** Additional information such as frequency, TGID, etc. can be see using the included software.
 
** Additional information such as frequency, TGID, etc. can be see using the included software.
* Priority Scan - the scanner will sample conventional objects for activity periodically while scanning and monitoring other objects. The scanner will also give IDs priority over other IDs while checking a particular trunking system for activity.
+
* Clock display while "off" (and connected to external power)
* Clock display while "off" (and connected to external power).
+
* Auto power-on ("alarm clock")
* Auto power-on ("alarm clock").
+
* Audio alert tones
* Power-on password.
+
* Power-on password
* Scan rate 70 CPS (without trunk scan).
+
* [http://en.wikipedia.org/wiki/Object_oriented Object oriented memory management]. See the [[Object Oriented Scanning Described]] article for more information.
* Search speed 80 CPS.
+
* Object capacity (Nominal, with 2 GB MicroSD Card): > 10 million, varies depending on user configuration
* Adaptive digital tracking (ADT).
+
* Built in IF discriminator data output can be enabled to the headphone jack and can be used with [http://wiki.radioreference.com/index.php/Unitrunker UniTrunker], [http://groups.yahoo.com/group/TRUNK88 Trunk88], and [http://www.thebriarpatch.org/treport/ Treport] decoders with a standard stereo audio patch cord.
* Digital signal processing (DSP).
+
* Built in discriminator data output in simple ASCII output using the PC/IF port can be sent to a com port or internal microSD card.
* Triple conversion.
+
* Tri-color alert LED - Object programmable; eight factory default colors to any color / brilliance you want by having direct access to the R-G-B drive values (including flash) to assign to talkgroups, frequencies, agencies, etc. Example settings are shown in the owners manual.
* [[Continuous Tone-Coded Squelch System|CTCSS]]/[[DCS]] abilities.
+
** LATCH option; the color of the last received object stays on until reset.
 +
* Motorola Smartzone systems
 +
** Scanner option to look for the site with the best received CC decode rate.
 +
(Not the same as RSSI on the Motorola rigs, but similar in operation.)
 +
* Scan Set; create a scan list tailored to your favorite scan list settings.
 +
One button operation to get to this set.
 +
* EDACS and Motorola TGID Patch (when used on system), currently in the HEX display format only.
 +
* Regular LTR trunking with auto-arrange for LCN.
 +
* [[Spectrum Sweeper]] Near field frequency capture
 +
* Triple conversion
 +
* Virtual Scanner Memory Management system (Second generation); One copy of working memory can hold a virtual numbers of objects, meaning any combination of talkgroups, conventional channels, and trunking systems. Each V-Scanner II folder holds one copy of working memory. Actual memory size is determined by the size of the microSD card memory size used.
 +
* Preprogrammed with all systems currently in the Radioreference database with ability to update as needed or once a week.
 +
* Scan rate 70 CPS (without trunk scan)
 +
* Search speed 80 CPS
 +
* User defined service search and limit search
 +
* Default Option keys; return to default setting for any menu
 +
* Selectable digital [[AGC]]
 +
* Adaptive digital tracking (ADT)
 +
* Digital signal processing (DSP)
 +
* [[Continuous Tone-Coded Squelch System|CTCSS]]/[[DCS]] abilities
 
* [[NAC|Network Access Code]] can be programmed to only break squelch when receiving the correct NAC in a conventional P25 system.
 
* [[NAC|Network Access Code]] can be programmed to only break squelch when receiving the correct NAC in a conventional P25 system.
* 16-character alpha-tagging with text entry can show ID code or service name set per the users preference.
+
* 16-character alpha-tagging with text entry can show ID code or service name set per the users preference
* Signal strength meter.
+
* L/O talkgroup ID or frequency
* 700MHz and 380MHz trunk scanning.
+
* 2 second default delay can be set from 0 to 60 Sec. on conventional and trunked.
* Multi-site trunking.
+
* Motorola [[Control Channel Only]] trunking
* Trunking option to look for the site with the best received CC decode rate (not the same as RSSI on the Motorola rigs, but similar in operation}.
+
* Private Calls and RadioID alpha display
* Motorola [[Control Channel Only]] trunking.
 
* Private Calls and RadioID display in decimal or hex.
 
 
** Note: If RadioID is greater than 9,999,999 (decimal), then HEX is displayed to fit in the 16 character display.
 
** Note: If RadioID is greater than 9,999,999 (decimal), then HEX is displayed to fit in the 16 character display.
* EDACS and Motorola TGID Patch (when used on system), currently in the HEX display format only.
+
* 700MHz and 380MHz Trunk Scanning
* Regular LTR trunking with auto-arrange for LCN.
+
* Easy-to-read back lit control and display with back lit keypad with user selectable settings
* Selectable digital [[AGC]].
+
* 7 service search ranges/ 1 user definable search range
* FlexStep - allows you to enter a frequency in any 1.250 MHz step.
+
* Search "seek" feature
* 20 dB [[attenuator]] global and per object settings.
+
* Tunes virtually all important bands—local marine, fire/police, Ham, CB, VHF-air, UHF-Air, racing, weather and more
* 7 service search ranges/ 1 user definable search range tunes virtually all important bands; marine, fire/police, Ham, CB, VHF-air, UHF-Air, and racing.
+
* Weather band with enhanced [[SAME]] Weather Alert functions and weather priority—access weather channels and alerts with the push of a button
* Zeromatic search tuning.
+
* Skywarn can be programmed with any number of "objects"
* Weather band with enhanced [[SAME]] Weather Alert functions and weather priority—access weather channels and alerts with the push of a button.
+
* Zeromatic search tuning
* Skywarn List can be programmed with any number of "objects".
+
* 20 dB [[attenuator]] global and per object settings
* Built in IF discriminator data output can be enabled to the headphone jack and can be used with [http://wiki.radioreference.com/index.php/Unitrunker UniTrunker], [http://groups.yahoo.com/group/TRUNK88 Trunk88], and [http://www.thebriarpatch.org/treport/ Treport] decoders with a standard stereo audio patch cord.
+
* True USB interface with logical device with Programming and recording features
* Built in discriminator data output in simple ASCII output using the PC/IF port can be sent to a com port or internal microSD card.
+
* 4 way navigation keys to access special modes and programming options emulating today's standard media player operation
* The PSR-800 uses a true USB interface. The 800 uses a logical device and installs drivers for both the radio and the microSD card.
+
* 6 line x 16 character display with relative signal strength meter
** Please see the [[Connecting scanners via USB]] article for USB cables to connect your PC to the scanner.
+
* Display of the Radio ID of the transmitting user in decimal or hex
* Advanced encryption handling:
+
*BNC connector
 +
* Please see the [[Connecting scanners via USB]] article for USB cables to connect your PC to the scanner
 +
* Advanced encryption handling  
 
**EncMode selects how the radio treats encrypted voice calls. Simple Display must be unchecked.
 
**EncMode selects how the radio treats encrypted voice calls. Simple Display must be unchecked.
 
**“Noise” setting plays the random undecoded encryption noise. Simple Display must be unchecked.
 
**“Noise” setting plays the random undecoded encryption noise. Simple Display must be unchecked.
Line 224: Line 230:
 
**“Tone” setting plays a soft tone for the duration of the call. Simple Display must be unchecked.
 
**“Tone” setting plays a soft tone for the duration of the call. Simple Display must be unchecked.
 
**EncLevel selects the tone level for tones played during encrypted calls
 
**EncLevel selects the tone level for tones played during encrypted calls
*Advanced conventional P25 systems:
+
*Advanced conventional P25 systems
 
**CONV TGID When enabled, shows the Talkgroup ID for P25 Conventional Talkgroup calls. Simple Display must be unchecked.
 
**CONV TGID When enabled, shows the Talkgroup ID for P25 Conventional Talkgroup calls. Simple Display must be unchecked.
 
**CONV Radio ID when enabled, shows the Radio ID for P25 conventional calls. Simple Display must be unchecked.
 
**CONV Radio ID when enabled, shows the Radio ID for P25 conventional calls. Simple Display must be unchecked.
* 2 second default delay can be set from 0 to 60 sec.
+
* CTCSS/DCS/NAC Search with store via Menu key press during comm and the "S" search icon display when the object is programmed for search.
*Skip or Lockout - lets you skip ''or'' permanently lockout any programmed object. All skipped objects can be restored (unskipped).
 
* 250 Search lockouts.
 
* Low Battery Alert - with customizable battery icon threshold values for NiMH and alkaline batteries.
 
* Default Options Key; return to default settings for any menu.
 
  
 
==Features found on the PSR-800 '''Not''' included on the RadioShack Pro-18==
 
==Features found on the PSR-800 '''Not''' included on the RadioShack Pro-18==
 
These are the features that the PSR-800 has above the PRO-18:
 
These are the features that the PSR-800 has above the PRO-18:
* X2 TDMA and P25 Phase II 2 slot TDMA ('''Note: ''' Firmware/DSP Upgrades are required)
 
 
* Recording / playback
 
* Recording / playback
* 201 scan lists (PRO-18 has 100 play lists)
+
* 200 scan lists (PRO-18 has 100 play lists)
 
* Tri-color alert LED
 
* Tri-color alert LED
 
* Discriminator output
 
* Discriminator output
Line 249: Line 250:
 
==Operating Tips==
 
==Operating Tips==
 
===Scan Sets Feature===
 
===Scan Sets Feature===
*There are 20 Scan Sets. Scan Sets you let you quickly select large groups of Scanlists to enable or disable just by enabling or disabling the Scan Sets that contain the Scan Lists instead of individually selecting each group of Scanlists.
+
*The Scan Sets feature is geared toward people who have lots of different things (where "different" is based on geography, agency, usage, etc.) they want to monitor, and want a somewhat easier method of choosing what to monitor than the default toggling of individual Scan Lists.
  
*The Scan Sets feature is geared toward people who have lots of different things (where "different" is based on geography, agency, usage, etc.) they want to monitor, and want a somewhat easier method of choosing what to monitor than the default toggling of individual Scan Lists.
+
*There are 200 Scan Lists. Each talkgroup and conventional channel belongs to no, any, or all of those Scan Lists. Scan Lists are toggled on/off via a "Scan Lists" menu (all 200 lists are in that menu).
  
*Firmware version 1.6 added "ScanSets Opt" setting. If enabled (checked), Scan Sets alone govern whether a scan list is scanned and the master Scan List enable array is ignored.
+
*There are 20 Scan Sets. Each Scan Set contains a list of 200 flags, one for each Scan List. Scan Sets are edited (their member Scan Lists toggled) by menus that looks just like the one mentioned in the previous paragraph. Scan Sets themselves are enabled/disabled via another menu (20 Scan Sets with a check box for each).
  
 
*In order to be "scanned", an object (talkgroup or conventional channel) must:
 
*In order to be "scanned", an object (talkgroup or conventional channel) must:
** a) be a member of at least one enabled Scan List, where that Scan List
+
**a) be a member of at least one enabled Scan List, where that Scan List
** b) is a member of at least one enabled Scan Set
+
**b) is a member of at least one enabled Scan Set
** By default:
+
 
***Scan List 001 is enabled, all others are disabled
+
*By default:
***Scan Set 01 contains all 200 Scan Lists, all other Scan Sets are empty
+
Scan List 001 is enabled, all others are disabled
***Scan Set 01 is enabled, all other Scan Sets are disabled
+
Scan Set 01 contains all 200 Scan Lists, all other Scan Sets are empty
** These defaults effectively make the Scan Sets feature transparent. Since Scan Set 01 is enabled and contains all 200 Scan Lists, condition (b) above is always satisfied: you can completely ignore the Scan Sets feature, and just use Scan Lists like you might on a PSR-500, PSR-310, PSR-700.
+
Scan Set 01 is enabled, all other Scan Sets are disabled
** The default settings are geared toward the [presumed] majority of users, who will only have a few Scan Lists they want to monitor or toggle. Those users can control what they hear by just toggling a few Scan Lists on or off.
+
*These defaults effectively make the Scan Sets feature transparent. Since Scan Set 01 is enabled and contains all 200 Scan Lists, condition (b) above is always satisfied: you can completely ignore the Scan Sets feature, and just use Scan Lists like you might on a PSR-500, PSR-310, PSR-700.
** For more "advanced" users, who might have many areas or agencies they want to split among many Scan Lists but who might have a few "common listening setups" (certain unique groups of Scan Lists they commonly monitor), toggling 200 Scan Lists might be cumbersome. The Scan Sets are intended to help with that.
 
** Example:
 
** City PD and FD, county Sheriff, and CHP. A generic example, though, might be something like this:
 
*** 10 cities, each with their own PD and FD
 
*** specific channels/talkgroups for PD and FD dispatch
 
*** 40 Scan Lists: <10 cities> x <PD vs. FD> x <dispatch vs. "everything else">
 
*** All 40 Scan Lists enabled
 
*** Scan Sets for things like:
 
*** All cities' PD dispatch
 
*** City #1 Fire (both dispatch and "everything else")
 
*** City #2 PD (both dispatch and "everything else")
 
*** City #1 and City #2 PD, dispatch only
 
*** City #1, City #3, and City #4, all PD and all Fire
 
***Toggling Scan Sets on/off can enable/disable such "groupings" much more easily than going through 40 Scan Lists
 
  
===Setting Up a System for Rebanding===
+
*The default settings are geared toward the [presumed] majority of users, who will only have a few Scan Lists they want to monitor or toggle. Those users can control what they hear by just toggling a few Scan Lists on or off.
#Select the system
+
 
#Select the site
+
*For more "advanced" users, who might have many areas or agencies they want to split among many Scan Lists but who might have a few "common listening setups" (certain unique groups of Scan Lists they commonly monitor), toggling 200 Scan Lists might be cumbersome. The Scan Sets are intended to help with that.
#Bring up the trunking tables for the system
+
 
#Set it from '''Auto-fill''' to '''Custom'''
+
*Example:
#Hit the '''Set Reband''' button
+
 
#Load the new configuration to the scanner
+
**City PD and FD, county Sheriff, and CHP. A generic example, though, might be something like this:
<small>Thanks to Troymail for the procedure</small>
+
**O 10 cities, each with their own PD and FD
 +
**O specific channels/talkgroups for PD and FD dispatch
 +
**O 40 Scan Lists: <10 cities> x <PD vs. FD> x <dispatch vs. "everything else">
 +
**O All 40 Scan Lists enabled
 +
**O Scan Sets for things like:
 +
**+ All cities' PD dispatch
 +
**+ City #1 Fire (both dispatch and "everything else")
 +
**+ City #2 PD (both dispatch and "everything else")
 +
**+ City #1 and City #2 PD, dispatch only
 +
**+ City #1, City #3, and City #4, all PD and all Fire
 +
**O Toggling Scan Sets on/off can enable/disable such "groupings" much more easily than going through 40 Scan Lists
  
 
==RR System Compatibility==
 
==RR System Compatibility==
Line 306: Line 303:
 
** Project 25 Standard
 
** Project 25 Standard
 
** X2 TDMA  
 
** X2 TDMA  
** Project 25, 2 slot Phase II (2 slot TDMA only; 4 slot is not supported)
+
***Note: X2 TDMA is working on hybrid systems, but is not yet verified on a completed P25 Phase II system because a completed system is unavailable. See this Wiki article for more information:[http://wiki.radioreference.com/index.php/P25#Project_25_Phase_II Project 25 Phase II].
  
 
*System Voices:
 
*System Voices:
Line 312: Line 309:
 
** Analog and APCO-25 Common Air Interface
 
** Analog and APCO-25 Common Air Interface
 
** APCO-25 Common Air Interface Exclusive
 
** APCO-25 Common Air Interface Exclusive
** APCO-25 Phase II TDMA
 
  
 
==Included Accessories==
 
==Included Accessories==
Line 341: Line 337:
  
 
==eBay Listings==  
 
==eBay Listings==  
 +
 
<ebay>GRE ("PSR-800","PSR800")</ebay>
 
<ebay>GRE ("PSR-800","PSR800")</ebay>
  

Revision as of 19:34, 10 September 2014

GRE COM PSR-800 scanning receiver

PSR-800LG.jpg

The PSR-800 is manufactured by GRE in China.

General Specifications

  • Rebanding supported? YES EZ-Scan will import tables for identified rebanded systems from the RadioReference database.
  • USB 2.0 Compliant Interface Built In
  • 200 Scan Lists
  • 200 V-Folders
  • A brochure for the PSR-800 can be downloaded here: PSR-800 Brochure


Frequency Coverage
Freq. Step Mode (Default)
25.0000 − 26.9600 MHz 10 kHz AM
26.9650 − 27.4050 MHz 10 kHz AM
27.4100 − 29.5050 MHz 5 kHz AM
29.5100 − 29.7000 MHz 5 kHz FM
29.7100 − 49.8300 MHz 10 kHz FM
49.8350 − 54.0000 MHz 5 kHz FM
108.000 − 136.9916 MHz 8.33 kHz AM
137.000 − 137.995 MHz 5 kHz FM
138.000 − 143.9875 MHz 12.5 kHz AM
144.000 − 147.9950 MHz 5 kHz FM
148.000 − 150.7875 MHz 12.5 kHz FM
150.800 − 150.8450 MHz 5 kHz FM
150.8525 − 154.4975 MHz 7.5 kHz FM
154.5150 − 154.6400 MHz 5 kHz FM
154.6500 − 156.2550 MHz 7.5 kHz FM
156.2750 − 157.4500 MHz 25 kHz FM
157.4700 − 161.5725 MHz 7.5 kHz FM
161.6000 − 161.9750 MHz 5 kHz FM
162.0000 − 174.0000 MHz 12.5 kHz FM
216.0025 − 219.9975 MHz 5 kHz FM
220.0000 − 224.9950 MHz 5 kHz FM
225.0000 − 379.999375 MHz 6.25 kHz AM
380.0000 − 419.987500 MHz 12.5 kHz FM
420.0000 − 450.000000 MHz 5 kHz FM
450.00625 − 469.99375 MHz 6.25 kHz FM
470.00000 − 512.00000 MHz 6.25 kHz FM
764.00000 − 781.996875 MHz 3.125 kHz FM
791.00000 − 796.996875 MHz 3.125 kHz FM
806.00000 − 823.987500 MHz 12.5 kHz FM
849.00000 − 868.987500 MHz 12.5 kHz FM
894.00000 − 939.987500 MHz 12.5 kHz FM
940.00000 − 960.000000 MHz 6.25 kHz FM
1240.0000 − 1300.00000 MHz 6.25 kHz FM
137.0000 − 174.0000 MHz 5 kHz FM (Canada)
380.00000 − 512.00000 MHz 12.5 kHz FM (Canada)
  • Dimensions approximately 5 5/16 x 2 1/8” x 1 1/16” (135 x 67 x 28 mm) (HWD)
  • Weight approximately 7.4 oz. (210g) without accessories and batteries
  • Operating voltage
    • DC 4.8 Volts (“AA” cell x 4pcs. Ni-MH Batteries)
    • DC 6 Volts (“AA” cell x 4pcs. ALKALINE Batteries)
    • Ext. power and charge voltage USB Power (DC 5V 500mA)
  • If batteries and the power cable are removed for more than ~1 minute, the clock and time will need to be reset by hand or through the software.
  • The PSR-800 uses a normal USB device cable. The 800 uses a logical device and installs drivers for both the radio and the microSD card.
  • Recording / playback of objects or all received audio at a set volume unchanged by the volume control.
    • Audio codec is AU format and is time/date stamped at the header file of the audio sample.
    • AU audio files can be played via Windows Media Player, WinAmp, and other players.
    • Additional information such as frequency, TGID, etc. can be see using the included software.
  • Clock display while "off" (and connected to external power)
  • Auto power-on ("alarm clock")
  • Audio alert tones
  • Power-on password
  • Object oriented memory management. See the Object Oriented Scanning Described article for more information.
  • Object capacity (Nominal, with 2 GB MicroSD Card): > 10 million, varies depending on user configuration
  • Built in IF discriminator data output can be enabled to the headphone jack and can be used with UniTrunker, Trunk88, and Treport decoders with a standard stereo audio patch cord.
  • Built in discriminator data output in simple ASCII output using the PC/IF port can be sent to a com port or internal microSD card.
  • Tri-color alert LED - Object programmable; eight factory default colors to any color / brilliance you want by having direct access to the R-G-B drive values (including flash) to assign to talkgroups, frequencies, agencies, etc. Example settings are shown in the owners manual.
    • LATCH option; the color of the last received object stays on until reset.
  • Motorola Smartzone systems
    • Scanner option to look for the site with the best received CC decode rate.

(Not the same as RSSI on the Motorola rigs, but similar in operation.)

  • Scan Set; create a scan list tailored to your favorite scan list settings.

One button operation to get to this set.

  • EDACS and Motorola TGID Patch (when used on system), currently in the HEX display format only.
  • Regular LTR trunking with auto-arrange for LCN.
  • Spectrum Sweeper Near field frequency capture
  • Triple conversion
  • Virtual Scanner Memory Management system (Second generation); One copy of working memory can hold a virtual numbers of objects, meaning any combination of talkgroups, conventional channels, and trunking systems. Each V-Scanner II folder holds one copy of working memory. Actual memory size is determined by the size of the microSD card memory size used.
  • Preprogrammed with all systems currently in the Radioreference database with ability to update as needed or once a week.
  • Scan rate 70 CPS (without trunk scan)
  • Search speed 80 CPS
  • User defined service search and limit search
  • Default Option keys; return to default setting for any menu
  • Selectable digital AGC
  • Adaptive digital tracking (ADT)
  • Digital signal processing (DSP)
  • CTCSS/DCS abilities
  • Network Access Code can be programmed to only break squelch when receiving the correct NAC in a conventional P25 system.
  • 16-character alpha-tagging with text entry can show ID code or service name set per the users preference
  • L/O talkgroup ID or frequency
  • 2 second default delay can be set from 0 to 60 Sec. on conventional and trunked.
  • Motorola Control Channel Only trunking
  • Private Calls and RadioID alpha display
    • Note: If RadioID is greater than 9,999,999 (decimal), then HEX is displayed to fit in the 16 character display.
  • 700MHz and 380MHz Trunk Scanning
  • Easy-to-read back lit control and display with back lit keypad with user selectable settings
  • 7 service search ranges/ 1 user definable search range
  • Search "seek" feature
  • Tunes virtually all important bands—local marine, fire/police, Ham, CB, VHF-air, UHF-Air, racing, weather and more
  • Weather band with enhanced SAME Weather Alert functions and weather priority—access weather channels and alerts with the push of a button
  • Skywarn can be programmed with any number of "objects"
  • Zeromatic search tuning
  • 20 dB attenuator global and per object settings
  • True USB interface with logical device with Programming and recording features
  • 4 way navigation keys to access special modes and programming options emulating today's standard media player operation
  • 6 line x 16 character display with relative signal strength meter
  • Display of the Radio ID of the transmitting user in decimal or hex
  • BNC connector
  • Please see the Connecting scanners via USB article for USB cables to connect your PC to the scanner
  • Advanced encryption handling
    • EncMode selects how the radio treats encrypted voice calls. Simple Display must be unchecked.
    • “Noise” setting plays the random undecoded encryption noise. Simple Display must be unchecked.
    • “Silent” setting plays no audio during the call. Simple Display must be unchecked.
    • “Tone” setting plays a soft tone for the duration of the call. Simple Display must be unchecked.
    • EncLevel selects the tone level for tones played during encrypted calls
  • Advanced conventional P25 systems
    • CONV TGID When enabled, shows the Talkgroup ID for P25 Conventional Talkgroup calls. Simple Display must be unchecked.
    • CONV Radio ID when enabled, shows the Radio ID for P25 conventional calls. Simple Display must be unchecked.
  • CTCSS/DCS/NAC Search with store via Menu key press during comm and the "S" search icon display when the object is programmed for search.

Features found on the PSR-800 Not included on the RadioShack Pro-18

These are the features that the PSR-800 has above the PRO-18:

  • Recording / playback
  • 200 scan lists (PRO-18 has 100 play lists)
  • Tri-color alert LED
  • Discriminator output
  • V-Scanner II
  • Scan Sets
  • Clock display while "off" (and connected to external power)
  • Auto power-on ("alarm clock")
  • "Extra" audio alert tones (PRO-18 has the 7 from PSR-500; PSR-800 has 8 more)
  • Power-on password

Operating Tips

Scan Sets Feature

  • The Scan Sets feature is geared toward people who have lots of different things (where "different" is based on geography, agency, usage, etc.) they want to monitor, and want a somewhat easier method of choosing what to monitor than the default toggling of individual Scan Lists.
  • There are 200 Scan Lists. Each talkgroup and conventional channel belongs to no, any, or all of those Scan Lists. Scan Lists are toggled on/off via a "Scan Lists" menu (all 200 lists are in that menu).
  • There are 20 Scan Sets. Each Scan Set contains a list of 200 flags, one for each Scan List. Scan Sets are edited (their member Scan Lists toggled) by menus that looks just like the one mentioned in the previous paragraph. Scan Sets themselves are enabled/disabled via another menu (20 Scan Sets with a check box for each).
  • In order to be "scanned", an object (talkgroup or conventional channel) must:
    • a) be a member of at least one enabled Scan List, where that Scan List
    • b) is a member of at least one enabled Scan Set
  • By default:
Scan List 001 is enabled, all others are disabled
Scan Set 01 contains all 200 Scan Lists, all other Scan Sets are empty
Scan Set 01 is enabled, all other Scan Sets are disabled
  • These defaults effectively make the Scan Sets feature transparent. Since Scan Set 01 is enabled and contains all 200 Scan Lists, condition (b) above is always satisfied: you can completely ignore the Scan Sets feature, and just use Scan Lists like you might on a PSR-500, PSR-310, PSR-700.
  • The default settings are geared toward the [presumed] majority of users, who will only have a few Scan Lists they want to monitor or toggle. Those users can control what they hear by just toggling a few Scan Lists on or off.
  • For more "advanced" users, who might have many areas or agencies they want to split among many Scan Lists but who might have a few "common listening setups" (certain unique groups of Scan Lists they commonly monitor), toggling 200 Scan Lists might be cumbersome. The Scan Sets are intended to help with that.
  • Example:
    • City PD and FD, county Sheriff, and CHP. A generic example, though, might be something like this:
    • O 10 cities, each with their own PD and FD
    • O specific channels/talkgroups for PD and FD dispatch
    • O 40 Scan Lists: <10 cities> x <PD vs. FD> x <dispatch vs. "everything else">
    • O All 40 Scan Lists enabled
    • O Scan Sets for things like:
    • + All cities' PD dispatch
    • + City #1 Fire (both dispatch and "everything else")
    • + City #2 PD (both dispatch and "everything else")
    • + City #1 and City #2 PD, dispatch only
    • + City #1, City #3, and City #4, all PD and all Fire
    • O Toggling Scan Sets on/off can enable/disable such "groupings" much more easily than going through 40 Scan Lists

RR System Compatibility

This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:

  • System Types:
    • Motorola Type I
    • Motorola Type II
    • Motorola Type IIi Hybrid
    • Motorola Type II Smartnet
    • Motorola Type II Smartzone
    • Motorola Type II Smartzone Omnilink
    • EDACS Standard (Wide)
    • EDACS Standard Networked
    • EDACS Narrowband (Narrow)
    • EDACS Narrowband Networked
    • EDACS SCAT
    • EDACS ESK (not ProVoice)
    • LTR Standard
    • Project 25 Standard
    • X2 TDMA
      • Note: X2 TDMA is working on hybrid systems, but is not yet verified on a completed P25 Phase II system because a completed system is unavailable. See this Wiki article for more information:Project 25 Phase II.
  • System Voices:
    • Analog
    • Analog and APCO-25 Common Air Interface
    • APCO-25 Common Air Interface Exclusive

Included Accessories

  • 5" 09080 Rubber Antenna
  • A standard USB A to USB Mini-B cable (No PC/IF converter cable needed)
  • 2GB MicroSD Card (Inside The Scanner)
  • Rotatable Belt Clip
  • CD-Rom (EZ Scan Digital Software Utility Program)

Recommended accessories (Not included with the radio)

FCC Type Acceptance

Related Pages

Yahoo Groups and Mailing Lists (receiver support)

eBay Listings

Return to the GRE Radios page