Difference between revisions of "Pro-106 and Pro-197 CPU/DSP Upgrades"
From The RadioReference Wiki
m |
|||
Line 4: | Line 4: | ||
* [http://groups.yahoo.com/neo/groups/RadioShackPRO-106/info Pro-106 Yahoo Group] | * [http://groups.yahoo.com/neo/groups/RadioShackPRO-106/info Pro-106 Yahoo Group] | ||
* [http://groups.yahoo.com/neo/groups/PRO-197/info Pro-197 Yahoo Group] | * [http://groups.yahoo.com/neo/groups/PRO-197/info Pro-197 Yahoo Group] | ||
+ | or check below: | ||
+ | ==Firmware downloads== | ||
+ | * [https://www.dropbox.com/s/o7yre6f2utqdkdl/RS%20PRO-106%20197%20CPU%20Firmware%20Upgrade%20Instructions%20v2.1.zip?dl=0 CPU 2.1 Firmware & DSP 1.4] | ||
+ | * [https://app.box.com/s/gzwc3mc4bjq6m9ghdwpe 1.9, 2.0 & 2.1 CPU Firmwares] | ||
==Display Current Firmware Level== | ==Display Current Firmware Level== | ||
Line 47: | Line 51: | ||
*Minimizes the possibility of a previous NAC displayed on a new transmission. | *Minimizes the possibility of a previous NAC displayed on a new transmission. | ||
− | |||
− | |||
− | |||
[[Category:Radio Shack Scanners Modifications]] | [[Category:Radio Shack Scanners Modifications]] |
Revision as of 08:07, 27 October 2016
Please use this article to document all CPU and DSP upgrades for the Radio Shack Pro-197 and Pro-106 scanners.
To find the updates, check section 6 below or the files section of the scanner's Yahoo group;
or check below:
Contents
Firmware downloads
Display Current Firmware Level
You can check the firmware version levels by pressing '3' while the scanner's powerup Welcome Message is displayed.
A sample output (Latest versions shown):
- uP App Ver: RF2.1
- DSP AppVer: RF1.4
- DSP VocVer: RF1.0
CPU 2.1 Upgrade
- Discussion thread: here
CPU 2.1 fixes
- Fixed Marine, VHF, and UHF search frequencies
CPU 2.0 Upgrade
- Discussion thread: here
CPU 2.0 fixes
- Pressing the ATT key during scanning while on a CONV object causes the object to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check.
- Changed 154-156MHz range to accommodate Marine channels
- Added duplicate checking to conventional channels created via PGM NEW CONV
CPU 1.9 Upgrade
- Discussion thread: here
CPU 1.9 fixes
- Pressing the ATT key during scanning while on a CONV object causes the object to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check
CPU 1.8 and DSP 1.4 Upgrades
- Discussion thread: here
CPU 1.8 fixes
- Adds patch support for P25, Motorola and EDACS trunking
- Changes CCDump type string to "EDn" if "narrow invert" is turned on
- Corrects LCD “mirror image” issue
DSP 1.4 fixes
- Minimizes the possibility of a previous NAC displayed on a new transmission.