Difference between revisions of "Pro-106 and Pro-197 CPU/DSP Upgrades"

Latest revision as of 16:59, 12 June 2020

Please use this article to document all CPU and DSP upgrades for ONLY the Radio Shack Pro-197 and Pro-106 scanners.

To find the updates, check the next section

Firmware downloads

IMPORTANT! DO NOT USE THESE ON WHISTLER MADE SCANNERS / PRO 651/652 RADIOS! YOUR RADIO WILL NOT WORK ANYMORE! See for more info - GRE made Scanner Firmware Update Thread

Display Current Firmware Level

You can check the firmware version levels by pressing '3' while the scanner's powerup Welcome Message is displayed.

A sample output (Latest versions shown):

uP App Ver: RF2.1
DSP AppVer: RF1.4
DSP VocVer: RF1.0

CPU 2.1 Upgrade

Discussion thread: here

CPU 2.1 fixes

Fixed Marine, VHF, and UHF search frequencies

CPU 2.0 Upgrade

Discussion thread: here

CPU 2.0 fixes

Pressing the ATT key during scanning while on a CONV object causes the object to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check.

Changed 154-156MHz range to accommodate Marine channels

Added duplicate checking to conventional channels created via PGM NEW CONV

CPU 1.9 Upgrade

Discussion thread: here

CPU 1.9 fixes

Pressing the ATT key during scanning while on a CONV object causes the object to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check

CPU 1.8 and DSP 1.4 Upgrades

Discussion thread: here

CPU 1.8 fixes

Adds patch support for P25, Motorola and EDACS trunking
Changes CCDump type string to "EDn" if "narrow invert" is turned on
Corrects LCD “mirror image” issue

DSP 1.4 fixes

Minimizes the possibility of a previous NAC displayed on a new transmission.

@@ Line 1: / Line 1: @@
-Please use this article to document all CPU and DSP upgrades for the Radio Shack [[Pro-197]] and [[Pro-106]] scanners.
+Please use this article to document all CPU and DSP upgrades for ONLY the Radio Shack [[Pro-197]] and [[Pro-106]] scanners.
-To find the updates, see the scanner's Yahoo group, or check the next section
+To find the updates, check the next section
 ==Firmware downloads==
@@ Line 7: / Line 7: @@
 YOUR RADIO WILL NOT WORK ANYMORE!
 See for more info - {{Thread|gre-scanners|303131-gre-made-scanner-firmware-update.html|GRE made Scanner Firmware Update}}
-* [https://www.dropbox.com/s/o7yre6f2utqdkdl/RS%20PRO-106%20197%20CPU%20Firmware%20Upgrade%20Instructions%20v2.1.zip?dl=1 CPU 2.1 Firmware & DSP 1.7]
+* [https://www.dropbox.com/s/o7yre6f2utqdkdl/RS%20PRO-106%20197%20CPU%20Firmware%20Upgrade%20Instructions%20v2.1.zip?dl=1 CPU 2.1 Firmware & DSP 1.4]
 * [https://app.box.com/s/gzwc3mc4bjq6m9ghdwpe 1.9, 2.0 & 2.1 CPU Firmwares]
@@ Line 15: / Line 15: @@
 A sample output (Latest versions shown):
 *uP App Ver: RF2.1
-*DSP AppVer: RF1.7
+*DSP AppVer: RF1.4
-*DSP VocVer: RF1.4
+*DSP VocVer: RF1.0
 ==CPU 2.1 Upgrade==
@@ Line 40: / Line 40: @@
 *Pressing the ATT key during scanning while on a CONV object causes the object to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check
-==CPU 1.8 and DSP 1.7 Upgrades==
+==CPU 1.8 and DSP 1.4 Upgrades==
 *Discussion thread: [http://forums.radioreference.com/radio-shack-scanners/177787-pro-106-197-cpu-1-8-dsp-1-4-released.html here]
@@ Line 48: / Line 48: @@
 *Corrects LCD “mirror image” issue
-===DSP 1.7 fixes===
+===DSP 1.4 fixes===
 *Minimizes the possibility of a previous NAC displayed on a new transmission.