Actions

Difference between revisions of "Pro-106 and Pro-197 CPU/DSP Upgrades"

From The RadioReference Wiki

m (Undo revision 262074 by Rodneyloveberry44 (talk))
Tag: Undo
m
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
Please use this article to document all CPU and DSP upgrades for the Radio Shack [[Pro-197]] and [[Pro-106]] scanners.
+
Please use this article to document all CPU and DSP upgrades for ONLY the Radio Shack [[Pro-197]] and [[Pro-106]] scanners.
  
To find the updates, see the scanner's Yahoo group, or check the next section  
+
To find the updates, check the next section  
 
   
 
   
 
==Firmware downloads==
 
==Firmware downloads==
Line 48: Line 48:
 
*Corrects LCD “mirror image” issue
 
*Corrects LCD “mirror image” issue
  
===DSP 1.7 fixes===
+
===DSP 1.4 fixes===
 
*Minimizes the possibility of a previous NAC displayed on a new transmission.
 
*Minimizes the possibility of a previous NAC displayed on a new transmission.
  

Latest revision as of 16:59, 12 June 2020

Please use this article to document all CPU and DSP upgrades for ONLY the Radio Shack Pro-197 and Pro-106 scanners.

To find the updates, check the next section

Firmware downloads

IMPORTANT! DO NOT USE THESE ON WHISTLER MADE SCANNERS / PRO 651/652 RADIOS! YOUR RADIO WILL NOT WORK ANYMORE! See for more info - GRE made Scanner Firmware Update Thread

Display Current Firmware Level

You can check the firmware version levels by pressing '3' while the scanner's powerup Welcome Message is displayed.

A sample output (Latest versions shown):

  • uP App Ver: RF2.1
  • DSP AppVer: RF1.4
  • DSP VocVer: RF1.0

CPU 2.1 Upgrade

  • Discussion thread: here

CPU 2.1 fixes

  • Fixed Marine, VHF, and UHF search frequencies

CPU 2.0 Upgrade

  • Discussion thread: here

CPU 2.0 fixes

  • Pressing the ATT key during scanning while on a CONV object causes the object to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check.
  • Changed 154-156MHz range to accommodate Marine channels
  • Added duplicate checking to conventional channels created via PGM NEW CONV

CPU 1.9 Upgrade

  • Discussion thread: here

CPU 1.9 fixes

  • Pressing the ATT key during scanning while on a CONV object causes the object to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check

CPU 1.8 and DSP 1.4 Upgrades

  • Discussion thread: here

CPU 1.8 fixes

  • Adds patch support for P25, Motorola and EDACS trunking
  • Changes CCDump type string to "EDn" if "narrow invert" is turned on
  • Corrects LCD “mirror image” issue

DSP 1.4 fixes

  • Minimizes the possibility of a previous NAC displayed on a new transmission.